Commit Graph

13 Commits

Author SHA1 Message Date
Jeff Shaw
4c287332c3 fm10k: add PF and VF interrupt handling
1. Add functions to enable PF/VF interrupt.
2. Add function to process error message passed from interrupt.
2. Add 2 interrupt handling functions, one for PF and one for VF.
2. Enable interrupt after completing initialization of NIC.

Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
2015-02-17 15:25:30 +01:00
Jeff Shaw
c0eb314107 fm10k: add VF support
fm10k pmd driver will support both PF and VF device with single
copy of code. The reason is NIC maps registers with same
function in PF and VF to same PCI I/O address. Then, PF/VF drivers
use same address to access registers belonging to it, HW will
translate the request to correct units.

For some functionalities that are unique to PF, driver will check
current driver type and behave correctly.

Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
2015-02-17 15:25:30 +01:00
Jeff Shaw
fbf3e0f911 fm10k: add vlan filter
Add fm10k_vlan_filter_set to set vlan.

Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
2015-02-17 15:25:30 +01:00
Jeff Shaw
c82dd0a7bf fm10k: add scatter receive
1. Add fm10k_recv_scattered_pkts function to receive jumbo frame
   and multi-segment packets.
2. Configure correct receive function in rx_init and dev_init.

Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
2015-02-17 15:25:30 +01:00
Jeff Shaw
57033cdf8f fm10k: add PF RSS
1. Configure RSS in fm10k_dev_rx_init function.
2. Add fm10k_rss_hash_update and fm10k_rss_hash_conf_get to get
   and inquery RSS configuration.

Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
2015-02-17 15:25:30 +01:00
Jeff Shaw
4b61d3bfa9 fm10k: add receive and tranmit
1. Add fm10k_recv_pkts and fm10k_xmit_pkts functions.
2. Link app function pointer to actual fm10k recv/xmit
   functions.
3. Change Makefile to compile new file fm10k_rxtx.c

Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
2015-02-17 15:25:30 +01:00
Jeff Shaw
9ae6068c86 fm10k: add dev start/stop
1. Add function to initialize RX queues.
2. Add function to initialize TX queues.
3. Add fm10k_dev_start, fm10k_dev_stop and fm10k_dev_close
   functions.
4. Add function to close mailbox service.

Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
2015-02-17 15:25:30 +01:00
Jeff Shaw
387bf3006c fm10k: add Rx/Tx single queue start/stop
1. Add 4 functions fm10k_dev_rx_queue_start,
   fm10k_dev_rx_queue_stop, fm10k_dev_tx_queue_start,
   and fm10k_dev_tx_queue_stop.
2. verify Rx packet buffer alignment is valid.
   Hardware requires specific alignment for Rx packet buffers. At
   least one of the following two conditions must be satisfied.
       1) Address is 512B aligned
       2) Address is 8B aligned and buffer does not cross 4K boundary.

   Alignment is checked by the driver when the Rx queue is reset. It
   is assumed that if an entire descriptor ring can be filled with
   buffers containing valid alignment, then all buffers in that mempool
   have valid address alignment. It is the responsibility of the user
   to ensure all buffers have valid alignment, as it is the user who
   creates the mempool.

   It is assumed the buffer needs only to store a maximum size Ethernet
   frame.

Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
2015-02-17 15:25:30 +01:00
Jeff Shaw
98068e0e04 fm10k: add Tx queue setup/release
Add fm10k_tx_queue_setup and fm10k_tx_queue_release functions.

Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
2015-02-17 15:25:30 +01:00
Jeff Shaw
6cfe8969c9 fm10k: add Rx queue setup/release
Add fm10k_rx_queue_setup and fm10k_rx_queue_release functions.

Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
2015-02-17 15:25:30 +01:00
Jeff Shaw
7e72cbfa32 fm10k: add reta query/update
1. Add fm10k_reta_update and fm10k_reta_query functions.
2. Add fm10k_link_update and fm10k_dev_infos_get functions.

Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
2015-02-17 15:25:30 +01:00
Jeff Shaw
a6061d9e70 fm10k: register PF driver
1. Add init function to scan and initialize fm10k PF device.
2. Add implementation to register fm10k pmd PF driver.
3. Add 3 functions fm10k_dev_configure, fm10k_stats_get and
   fm10k_stats_get.
4. Add fm10k.h to define macros and basic data structure.
5. Add fm10k_logs.h to control log message output.
6. Change config/common_bsdapp and config/common_linuxapp, add
   macros to control fm10k pmd driver compile for linux and bsd.
7. Add Makefile.
8. Change lib/Makefile to add fm10k driver into compile list.
9. Change mk/rte.app.mk to add fm10k lib into link.
10. Add ABI version of librte_pmd_fm10k

Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
2015-02-17 15:25:30 +01:00
Jeff Shaw
7223d200c2 fm10k: add base driver
Base driver is developed and maintained by Intel ND team, includes
basic functional service to Intel Ethernet Switch FM10000 Series
of silicons.
Any suggestion on bug fix and improvement within this directory is
welcome, but need this team to change and update.

Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
2015-02-17 15:25:30 +01:00