Improve logic:
* to get list of valid devices based on driver id so that to
eliminate unnecessary if check for driver id match in device loop
* loop till 1st device supporting asymmetric feature is found unlike
previous logic which breaks on 1st device
Signed-off-by: Kanaka Durga Kotamarthy <kkotamarthy@marvell.com>
Signed-off-by: Ayuj Verma <ayverma@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch fixes the issue of memory overwrite after the end of
the output buffer by calculating its size as the number of all
segments multipled by the output segment size.
Additionally buffer overflow errors returned by PMD driver are
detected and shown, ending the test.
Also the output buffer size multiplier was increased from 105%
to 110% to allow running the tests on noncompressible files that
expand to over 107% of original size during the compression.
The changes were made in the verification part of the flow and
they don't affect the benchmark results.
Fixes: 424dd6c8c1 ("app/compress-perf: add weak functions for multicore test")
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds extra features to the compress performance
test. Some important parameters (memory allocation,
number of ops, number of segments) are calculated and
printed out.
Information about threads, cores, devices and queue-pairs
is also printed.
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Asymmetric crypto is not required for test-crypto-perf application.
Disabling the feature using 'ff_disable' field.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Shally Verma <shallyv@marvell.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
MAC address parsing was causing failure [1],
this patch partially reverts the commit
commit b5ddce8959 ("app/testpmd: use new ethernet address parser")
[1]
testpmd> flow validate 0 priority 2 ingress group 0 pattern eth dst
is 98:03:9B:5C:D9:00 / end actions queue index 0 / end
Bad arguments
Fixes: b5ddce8959 ("app/testpmd: use new ethernet address parser")
Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Raslan Darawsheh <rasland@mellanox.com>
Some configuration options can not be tested properly with testpmd
because it automatically starts all ports. This makes it harder
to test driver handling of configuration options:
(for example rx_deferred_start).
Add new command line flag --disable-device-start which skips
the device start. The port can then be started manually later.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
With the latest published interface of
rte_eal_hotplug_[add,remove](), and rte_eth_dev_close(),
rte_eth_dev_close() would cleanup all the data structures of
port's eth dev leaving the device common resource intact
if RTE_ETH_DEV_CLOSE_REMOVE is set in dev flags.
So a new command "detach device" (~hotplug remove) to work,
with device identifier like "port attach" is added
to be able to detach closed devices.
Also to display currently probed devices, another command
"show device info <identifier>|all" is also added as a
part of this change.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
GRE key (rte_flow_item_type_gre_key) is also needed in
raw encapsulation/decapsulation.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Open the MPLS's TC and S bits of rte_flow_item_mpls in command line.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch intend to support
action_raw_encap/decap [1] in a generic and convenient way.
Two new commands - set raw_encap, set raw_decap are introduced just
like the other commands for encap/decap, i.e. set vxlan.
These two commands have corresponding global buffers
which can be used by PMD as the input buffer for raw encap/decap.
The commands use the rte_flow pattern syntax to help user build the
raw buffer in a convenient way.
A common way to use it:
- encap matched egress packet with VxLAN tunnel:
testpmd> set raw_encap eth src is 10:11:22:33:44:55 / vlan tci is 1
inner_type is 0x0800 / ipv4 / udp dst is 4789 / vxlan vni
is 2 / end_set
testpmd> flow create 0 egress pattern eth / ipv4 / end actions
raw_encap / end
- decap l2 header and encap GRE tunnel on matched egress packet:
testpmd> set raw_decap eth / end_set
testpmd> set raw_encap eth dst is 10:22:33:44:55:66 / ipv4 / gre
protocol is 0x0800 / end_set
testpmd> flow create 0 egress pattern eth / ipv4 / end actions
raw_decap / raw_encap / end
- decap VxLAN tunnel and encap l2 header on matched ingress packet:
testpmd> set raw_encap eth src is 10:11:22:33:44:55 type is 0x0800 /
end_set
testpmd> set raw_decap eth / ipv4 / udp / vxlan / end_set
testpmd> flow create 0 ingress pattern eth / ipv4 / udp dst is 250 /
vxlan vni is 0x1234 / ipv4 / end actions raw_decap /
raw_encap / queue index 1 / mark id 0x1234 / end
[1] http://mails.dpdk.org/archives/dev/2018-October/116092.html
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The help string of set vxlan*, set nvgre* are in "config" section.
But they actually do not alter NIC or testpmd's configuration and
they will be used by "flow" command later.
Put them in "filters" section along with "flow" command seems more
reasonable.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch updates "show port info [port_id]" command to display
the tx_desc_lim.nb_seg_max and tx_desc_lim.nb_mtu_seg_max fields
of rte_eth_dev_info structure.
Fixes: 4fb7e803eb ("ethdev: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
update unit tests for configuration flexibility of pipe traffic
classes and queues size.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
All higher priority traffic classes contain only one queue, thus
remove wrr function for them. The lowest priority best-effort
traffic class conitnue to have multiple queues and packet are
scheduled from its queues using wrr function.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
This patch add the support to handle the failure in session
create for wireless related cases. Else it will cause
segment fault due to I/O on un-initialized sessions.
Fixes: b3bbd9e5f2 ("cryptodev: support device independent sessions")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
BT0 block type padding after rfc2313 has been discontinued.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
Asymmetric nature of RSA algorithm suggest to use
additional field for output. In place operations
still can be done by setting cipher and message pointers
with the same memory address.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds checking if device support ZUC
algorithms before running ZUC test cases.
It also removes unnecessary checks of digest
appended space and fixes some comments wording.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Use ERR rather than INFO to warn that it's a negative test else
the errors are seen but the warning to expect them isn't.
Also add comment to make it easier to follow code.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
This patch fixes some minor problems like 'magic numbers',
spelling mistakes, enumes naming.
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds a possibility to force controlled process termination
as a result of two signals: SIGTERM and SIGINT
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds a benchmark part to
compression-perf-tool as a separate test case, which can be
executed multi-threaded.
Also updates release notes.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds a verification part to
compression-perf-tool as a separate test case, which can be
executed multi-threaded.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds --ptest option to make possible to choose
test case from command line.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
This patch adds template functions for multi-cores performance
version of compress-perf-tool
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
On restarting worker 0 after shutdown, packets handled by
worker 0 must be incremented only when a packet is received by
it.
Fixes: c3eabff124 ("distributor: add unit tests")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: David Hunt <david.hunt@intel.com>
Currently, if there is no procfs mounted, test application will
fail to run any multiprocess-related autotests (EAL flags etc.)
without a clear explanation as to why this happens.
Add a check specifically for that condition, as well as add a
general stringified error message to rte_panic.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Issue is observed while running 'metrics_autotest' continuously
without quiting. During first execution all test cases pass but
second run onwards first test case fails as library is already
initialized.
To resolve, introduced a new API to deinitialise the library
after all test cases are executed.
Fixes: cd38042429 ("test/metrics: add unit tests for metrics library")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Tested-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
The pdump tool works as the secondary process. When the primary process
exits and the residual secondary process keeps running, it will make the
primary process can't start up again. Since the ex-fbarry files are still
attached by the secondary process pdump, the 'new' primary process can't
get these files locked.
The patch is to set up an alarm which runs every 0.5s periodically
to monitor the primary process in the pdump. Once the primary exits,
so will the pdump.
Signed-off-by: Suanming Mou <mousuanming@huawei.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
A secondary process cannot access HW mempool already
initiazed by primary, and neither it can setup its own
HW mempool due to its own restrictions.
Since dpdk-pdump creates mempool for managing its local
mbufs, SW mempool is capable enough to solve this purpose.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
The cmdline_parse_ether_addr does not need to be used everywhere
in testpmd. Can use rte_ether_unformat_addr instead.
As an added bonus it eliminates some code for copying.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Support matching on GRE key and present bits (C,K,S)
Example testpmd command could be:
testpmd>flow create 0 ingress group 1 pattern eth / ipv4 /
gre / gre_key value is 0x12345678 / end
actions rss queues 1 0 end / mark id 196 / end
Which will match GRE packet with k present bit set and key value is
0x12345678.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When using synthetic and timer event producer reduce the calls made to
mempool library by using get_bulk() instead of get().
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
'__sync' built-in functions are deprecated, should use the '__atomic'
built-in instead. the sync built-in functions are full barriers, while
atomic built-in functions offer less restrictive one-way barriers,
which help performance.
Here is the example test result on TX2:
sudo ./arm64-armv8a-linuxapp-gcc/app/test -c 0x7fffffe \
-n 4 --socket-mem=1024,0 --file-prefix=~ -- -i
RTE>>ring_perf_autotest
*** ring_perf_autotest without this patch ***
SP/SC bulk enq/dequeue (size: 8): 6.22
MP/MC bulk enq/dequeue (size: 8): 11.50
SP/SC bulk enq/dequeue (size: 32): 1.85
MP/MC bulk enq/dequeue (size: 32): 2.66
*** ring_perf_autotest with this patch ***
SP/SC bulk enq/dequeue (size: 8): 6.13
MP/MC bulk enq/dequeue (size: 8): 9.83
SP/SC bulk enq/dequeue (size: 32): 1.96
MP/MC bulk enq/dequeue (size: 32): 2.30
So for the ring performance test, this patch improved 11% of ring
operations performance.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
'__sync' built-in functions are deprecated, should use the '__atomic'
built-in instead. the sync built-in functions are full barriers, while
atomic built-in functions offer less restrictive one-way barriers,
which help performance.
Here is the example test result on TX2:
sudo ./arm64-armv8a-linuxapp-gcc/app/test -l 112-139 \
-n 4 --socket-mem=1024,1024 -- -i
RTE>>distributor_perf_autotest
*** distributor_perf_autotest without this patch ***
==== Cache line switch test ===
Time for 33554432 iterations = 1519202730 ticks
Ticks per iteration = 45
*** distributor_perf_autotest with this patch ***
==== Cache line switch test ===
Time for 33554432 iterations = 1251715496 ticks
Ticks per iteration = 37
Less ticks needed for the cache line switch test. It got 17% of
performance improvement.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Unit test and perf test for MCS queued lock.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Adding LDPC vectors for UT verification, coverage,
and profiling for 5GNR encode/decode operations.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Extending test framework for FEC 5GNR operations
for UT verification and profiling.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Renaming of the enums and structure which were LTE specific to
allow for extension and support for 5GNR operations.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
This patch makes unsupported tests visible in
the testsuite summary.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds test cases for wireless in-place
and out-of-place auth-cipher operations with
scatter-gather lists as input and output mbufs.
Test cases include buffer appended digest
generation with encryption and buffer decryption
with appended digest verification.
It also adds cases where digest is encrypted
only partially.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds test cases for kasumi in-place
and out-of-place auth-cipher operations. Test
cases include buffer appended digest generation
with encryption and buffer decryption with
appended digest verification.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds test cases for zuc in-place
and out-of-place auth-cipher operations. Test
cases include buffer appended digest generation
with encryption and buffer decryption with
appended digest verification.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds test cases for snow3g in-place
and out-of-place auth-cipher operations. Test
cases include buffer appended digest generation
with encryption and buffer decryption with
appended digest verification.
It also adds cases where digest is encrypted
only partially.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Set freed cop pointers to NULL
Set other freed pointers to NULL instead of 0
Fixes: 05fe65eb66 ("test/ipsec: introduce functional test")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
