The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
L3fwd was trying to use an inexistent function "simple_ipv6_fwd_4pkts",
instead it should be "simple_ipv6_fwd_8pkts", and "simple_ipv8_fwd_4pkts"
instead of "simple_ipv4_fwd_8pkts".
clang reports some unused functions, used only for LPM lookup:
examples/l3fwd/main.c:545:1: error: unused function 'send_packetsx4'
examples/l3fwd/main.c:1165:1: error: unused function 'rfc1812_process'
Fixes: 80fcb4d4 ("examples/l3fwd: increase lookup burst size to 8")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: more #if to fix clang warnings]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
With the new hash implementation, the minimum lookup burst size
to get good performance is 8, since its internal pipeline
consists of 4 stages of 2 entries each, so to avoid
duplication, burst size should be 8 or more entries.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The cuckoo hash has a fixed number of entries per bucket, so the
configuration parameter for this is unused. We change this field in the
parameters struct to "reserved" to indicate that there is now no such
parameter value, while at the same time keeping ABI consistency.
Fixes: 48a3991196 ("hash: replace with cuckoo hash implementation")
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch simply applies the transform previously committed in
scripts/cocci/mtod-offset.cocci. No other modifications have been
made here.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add a command-line parameter to l3fwd, to allow the user to specify the
destination mac address for each ethernet port used.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Latest mbuf changes (priv_size addition and related fixes)
exposed small problem with testpmd and few other sample apps:
when mbuf size is exaclty 2KB or less, that causes
ixgbe PMD to select scattered RX even for configs with 'normal'
max packet length (max_rx_pkt_len == ETHER_MAX_LEN).
To overcome that problem and unify the code, new macro was created
to represent recommended minimal buffer length for mbuf.
When appropriate, samples are updated to use that macro.
Fixes: dfb03bbe2b ("app/testpmd: use standard functions to initialize
mbufs and mbuf pool")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
New data type to manipulate 256 bit AVX values.
Rename field in the rte_xmm to keep common naming across SSE/AVX fields.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Fix the following error:
error: unused function 'l3fwd_simple_forward'
The l3fwd_simple_forward() is maybe unused, due to compilation options
(APP_LOOKUP_METHOD, ENABLE_MULTI_BUFFER_OPTIMIZE). As the combinatorial
is quite big, it looks simpler to add the __attribute__((unused)) on
this function, so that the compiler does not complain.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
For apps that were using default rte_eth_rxconf and rte_eth_txconf
structures, these have been removed and now they are obtained by
calling rte_eth_dev_info_get, just before setting up RX/TX queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Since commit a155d43011 ("support link bonding device initialization"),
rte_eal_pci_probe() is called in rte_eal_init().
So it doesn't have to be called by application anymore.
It has been fixed for testpmd in commit 2950a76931,
and this patch remove it from other applications.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The rte_pktmbuf structure was initially included in the rte_mbuf
structure. This was needed when there was 2 types of mbuf (ctrl and
packet). As the control mbuf has been removed, we can merge the
rte_pktmbuf into the rte_mbuf structure.
Advantages of doing this:
- the access to mbuf fields is easier (ex: m->data instead of m->pkt.data)
- make the structure more consistent: for instance, there was no reason
to have the ol_flags field in rte_mbuf
- it will allow a deeper reorganization of the rte_mbuf structure in the
next commits, allowing to gain several bytes in it
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
[Bruce: updated for latest code and new example apps]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
No need for that 'x bit' on source files.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Latest changes introduced a small degradation for the corner case
when each input packet is destined to the different port.
For the test-case when 1 core manages 4 ports and packet stream looks like:
IPV4_DSTPORT0, IPV4_DSTPORT1, IPV4_DSTPORT3, IPV4_DSTPORT4, IPV4_DSTPORT0, ...
non-optimised code path outperforms optimised one by 2-3%.
These changes supposed to close that gap.
From my testing: now for the case described above optimised code path
produces same numbers as non-optimised one.
For other test-cases numbers remain about the same.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The function rte_snprintf serves no useful purpose. It is the
same as snprintf() for all valid inputs. Deprecate it and
replace all uses in current code.
Leave the tests for the deprecated function in place.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
- i40e RSS flags have been added (and enlarged to 64-bit)
- A new configuration of 'uint8_t rss_key_len' has been added in
'struct rte_eth_rss_conf' to support different length of RSS keys.
- In each PMD, only the supported flags are masked.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
With latest HW and optimised RX/TX path there is a huge gap between
tespmd iofwd and l3fwd performance results.
So there is an attempt to optimise l3fwd LPM code path and reduce the gap:
- Instead of processing each input packet up to completion -
divide packet processing into several stages and perform
stage by stage for the whole burst.
- Unroll things by the factor of 4 whenever possible.
- Use SSE instincts for some operations (bswap, replace MAC addresses, etc).
- Avoid TX packet buffering whenever possible.
- Move some checks from RX/TX into setup phase.
Note that new(optimized) code path can be switched on/off by setting
ENABLE_MULTI_BUFFER_OPTIMIZE macro to 1/0.
Some performance data:
SUT: dual-socket board IVB 2.8GHz, 2x1GB pages.
4 ports on 4 NICs (all at socket 0) connected to the traffic generator.
kernel: 3.11.3-201.fc19.x86_64, gcc: 4.8.2.
64B packets, using the packet flooding method.
All 4 ports are managed by one logical core:
Optimised scalar PMD RX/TX was used.
DIFF % (NEW-OLD)
IPV4-CONT-BURST: +23%
IPV6-CONT-BURST : +13%
IPV4/IPV6-CONT-BURST: +8%
IPV4-4STREAMSX8: +7%
IPV4-4STREAMSX1: -2%
Test cases description:
IPV4-CONT-BURST - IPV4 packets all packets from the one input port
are destined for the same output port.
IPV6-CONT-BURST - IPV6 packets all packets from the one input port
are destined for the same output port.
IPV4/IPV6-CONT-BURST - mix of the first 2 with interleave=1
(e.g: IPV4,IPV6,IPV4,IPV6, ...)
IPV4-4STREAMSX1 - 4 streams of IPV4 packets, where all packets
from same stream are destined for the same output port
(e.g: IPV4_DST_P0, IPV4_DST_P1, IPV4_DST_P2, IPV4_DST_P3, IPV4_DST_P0, ...)
IPV4-4STREAMSX8 - same as above but packets for each stream
are coming in groups of 8
(e.g: IPV4_DST_P0 X 8, IPV4_DST_P1 X 8, IPV4_DST_P2 X 8, IPV4_DST_P3 X 8,
IPV4_DST_P0 X 8, ...)
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The "default" part in configuration filenames is misleading.
Rename this as "native", as this is the RTE_MACHINE that is set in these files.
This should make it clearer for people who build DPDK on a system then run it on
another one.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Now that we've converted all the pmds in dpdk to use the driver registration
macro, rte_pmd_init_all has become empty. As theres no reason to keep it around
anymore, just remove it and fix up all the eample callers.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
A series of minor changes to example applications included in the
Intel DPDK 1.6 release.
* changes to NIC configuration flags, e.g. specifying RSS
* replacing local "DIM" macro with common "RTE_DIM" macro
* minor whitespace changes for alignment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
