There is no parameter called "eth-peer-configfile" in testpmd.
It should be "eth-peers-configfile". See the usage() method in
app/test-pmd/parameters.c.
Fixes: a67857e97ba8 ("doc: clarify usage of testpmd MAC forward mode")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Previous patch removed the VLAN item from example code.
This patch fixes the code and documentation accordingly.
Code update includes fix of comments, and removal of redundant
variables and their initialization.
Documentation update reflects the code changes done in previous
patch and in this patch.
Fixes: 9af4eb565710 ("examples/flow_filtering: remove VLAN item")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
AVX512 was disabled for GCC because of Bugzilla issue 97 [1],
the GCC defect submitted for the issue [2] highlighted that this is
a known binutils version 2.30 issue.
Narrowed the scope of no-avx512 to the this specific binutils version.
[1]
https://bugs.dpdk.org/show_bug.cgi?id=97
[2]
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88096
Fixes: 8d07c82b239f ("mk: disable gcc AVX512F support")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
RTE_MBUF_INDIRECT() is replaced with RTE_MBUF_CLONED() and removed.
This macro was deprecated in release 18.05 when EXT_ATTACHED_MBUF was
introduced.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In some cases it is useful to allow user to specify destination
ether address for outgoing packets.
This patch adds such ability by introducing new 'neigh' config
file option.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Right now ipsec-secgw always enables TX offloads
(DEV_TX_OFFLOAD_MULTI_SEGS, DEV_TX_OFFLOAD_SECURITY),
even when they are not requested by the config.
That causes many PMD to choose full-featured TX function,
which in many cases is much slower then one without offloads.
That patch adds ability for the user to disable unneeded HW offloads.
If DEV_TX_OFFLOAD_IPV4_CKSUM is disabled by user, then
SW version of ip cksum calculation is used.
That allows to use vector TX function, when inline-ipsec is not
requested.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add 'uint64_t opaque_data' inside struct rte_security_session.
That allows upper layer to easily associate some user defined
data with the session.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds a opaque data field to cryptodev symmetric session.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds a refcnt field to every session private data in the
cryptodev symmetric session. The counter is used to prevent freeing
symmetric session blindly before it is not cleared by every type of
crypto device in use.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds a user_data_sz field to cryptodev symmetric session.
The field is used to check if reading or writing the session's user
data field is eligible.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates the rte_cryptodev_sym_session structure for
cryptodev library. The updates include a changed session private
data array and an added nb_drivers field. They are used to
calculate the correct session header size and ensure safe access
of the session private data.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds a new API "rte_cryptodev_sym_session_pool_create()" to
cryptodev library. All applications are required to use this API to
create sym session mempool as it adds private data and nb_drivers
information to the mempool private data.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch changes the cryptodev queue pair configure structure
to enable two mempool passed into cryptodev PMD simutaneously.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds the plain SHA1, SHA224, SHA256, SHA384, and SHA512
algorithms support to AESNI-MB PMD. The cryptodev unit test and
documentation are updated accordingly.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch enables compression on DH895x HW series
and updates supported hardware accelerator devices list.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds the AES-GMAC authentication only support to AESNI-MB
PMD, including the driver code, cryptodev unit test, and documentation
updates.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Damian Nowak <damianx.nowak@intel.com>
This patch updates the AESNI-MB PMD document with the new intel-ipsec-mb
version number, the release note with new library version support, and
the deprecation notice for removing some library version support in
19.05 release.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes the incorrect intel multi buffer library support
version and missed limitation of GCM algorithm support.
Fixes: 0e9f8507afcb ("crypto/aesni_mb: support AES-GCM algorithm")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds checksum support in the ISA-L PMD for both compression
and decompression.
CRC32 is supported as well as Adler32.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Function iter_mempool is used for iterating slected mempool elements
and display the contents of elements for a max of 256 bytes. In case
of invalid or no name for mempool, no information is displayed.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_mempool is used for displaying valid MEMPOOL.
In case of invalid or no name, whole list is dump.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_ring is used for displaying information of RING instance
of the primary process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_crypto is used for displaying the crypto PMD under primary
process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_tm is used for displaying the tm PMD under the primary
process. This covers basic and per node|level details with statistics.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_port is used for displaying the port PMD information under
primary process. The information shows basic, per queue and security.
Also helper MACRO 'MAX_STRING_LEN, STATS_BDR_FMT and STATS_BDR_STR' and
meson build file is updated for new functionality.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This commit includes the add of:
- ConnectX-6 device ID
- ConnectX-6 SRIOV device ID
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch implements the changes proposed in the deprecation
notes [1][2].
librte_mbuf changes:
The mbuf->hash.sched field is updated to support generic
definition in line with the ethdev traffic manager and meter APIs.
The new generic format contains: queue ID, traffic class, color.
Added public APIs to set and get these new fields to and from mbuf.
librte_sched changes:
In addtion, following API functions of the sched library have
been modified with an additional parameter of type struct
rte_sched_port to accommodate the changes made to mbuf sched field.
(i)rte_sched_port_pkt_write()
(ii) rte_sched_port_pkt_read_tree_path()
librte_pipeline, qos_sched UT, qos_sched app are updated
to make use of new changes.
Also mbuf->hash.txadapter has been added for eventdev txq,
rte_event_eth_tx_adapter_txq_set and rte_event_eth_tx_adapter_txq_get()
are updated to use mbuf->hash.txadapter.txq.
doc:
Release notes updated.
Removed deprecation notice for mbuf->hash.sched and sched API.
[1] http://mails.dpdk.org/archives/dev/2018-February/090651.html
[2] https://mails.dpdk.org/archives/dev/2018-November/119051.html
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
This capability is reported when supported by the current emitting
sub-device. Failsafe PMD itself does not exercise fast free logic.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Updated the doc and release notes on the support for requesting more
queues.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add ops link_update.
LSC interrupt is also enabled in this patch.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Normally when starting/stopping the device the queue
should be started and stopped. Support them both in
this patch.
Below ops are added,
dev_configure
dev_start
dev_stop
dev_close
dev_reset
rx_queue_start
rx_queue_stop
tx_queue_start
tx_queue_stop
rx_queue_setup
rx_queue_release
tx_queue_setup
tx_queue_release
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Previously, the features list was indicating unsupported ENA PMD
features and were missing few ones, that were actually supported.
The features file was updated, so it is now reflecting current driver
state.
The documentation was updated with the more actual example and features,
especially ones which are ENA and not listed in the features file.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Add the SW assisted VDPA live migration feature into NIC doc.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
As of commit 364e08f2bbc0, DPDK allows an application to send and
receive raw packets using an AF_PACKET and PACKET_MMAP, when using
Linux Kernel. This complements it by adding a simple guide with the
following information:
- An introduction, where a brief explanation of this driver is given,
pointing out the dependency on PACKET_MMAP;
- Which options are supported at configuration time, while setting up an
interface, and it's inherent limitations;
- What the prerequisites are;
- A command line example of how to set up a DPDK port using the
af_packet driver.
Since there's a dependency in PACKET_MMAP, the guide also points to the
original Kernel documentation, so the reader can get more details.
Signed-off-by: Tiago Lam <tiago.lam@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
