Since this driver does not distinguish unicast/multicast addresses,
applications could always rely on the standard MAC add/remove/set
interface to configure both types.
As a result, the multicast address list interface never got implemented
(rte_eth_dev_set_mc_addr_list()) however PMD-agnostic applications still
rely on it for compatibility reasons; a wrapper is therefore required.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Mellanox mlx5 PMD implements the list of devices to process the memory
free events to reflect the actual memory state to Memory Regions.
Because this list contains the devices and devices may share the
same context the callback routine may be called multiple times
with the same parameter, that is not optimal. This patch modifies
the list to contain the device contexts instead of device objects
and shared context is included in the list only once.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The multiport Infiniband device support was introduced [1].
All active ports, belonging to the same Infiniband device use the single
shared Infiniband context of that device and share the resources:
- QPs are created within shared context
- Verbs flows are also created with specifying port index
- DV/DR resources
- Protection Domain
- Event Handlers
This patchset adds support for Memory Regions sharing between
ports, created on the base of multiport Infiniband device.
The datapath of mlx5 uses the layered cache subsystem for
allocating/releasing Memory Regions, only the lowest layer L3
is subject to share due to performance issues.
[1] http://patches.dpdk.org/cover/51800/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
There are some physical link settings can be queried from
Ethernet devices: link status, link speed, speed capabilities,
duplex mode, etc. These setting do not make a lot of sense for
representors due to missing physical link. The new kernel drivers
dropped query for link settings for representors causing the
ioctl call to fail. This patch adds some kind of emulation
of link settings to PMD - representors inherit the link parameters
from the master device. The actual link status (up/down)
is retrieved from the representor device.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When creating the modify action using Direct Rules, we need to
add flags to mark, if the action will be done on root table or on
private table.
Fixes: 4f84a19779 ("net/mlx5: add Direct Rules API")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The RX stats will increase even no packets sent, this patch fix this issue
by modifying ipackets and ibytes statistics based on vsi instead of port
to avoid statistics error.
Fixes: a37bde5631 ("net/ice: support statistics")
Cc: stable@dpdk.org
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Identified by LGTM, the loop was incorrectly incrementing a different
variable and conditional on another.
Fixes: fe2b986ac6 ("net/dpaa2: support generic flow")
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
'rte_eth_dev_get_port_by_name()' return value is not checked caught by
coverity, adding return value check.
Coverity issue: 305853
Fixes: 96cb195211 ("net/ring: use EAL APIs in PMD specific API")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The ring name is passed in as part of this drivers API, but it
doesn't check that the name is not truncated.
Fixes: 96cb195211 ("net/ring: use EAL APIs in PMD specific API")
Fixes: e1e4017751 ("ring: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Don't hard code string length in two place; use sizeof() instead.
Ring name should use RTE_RING_NAMESIZE.
Fixes: 96cb195211 ("net/ring: use EAL APIs in PMD specific API")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Whitespace fixes to bring inline with current DPDK style.
Fixes: e1e4017751 ("ring: add new driver")
Fixes: a74a99bbb8 ("ring: free rings when detaching device")
Fixes: 61934c0956 ("ring: convert to use of PMD_REGISTER_DRIVER and fix linking")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix the issues reported by Coverity check, "Null-checking
vsi suggests that it may be null, but it has already been
dereferenced on all paths leading to the check."
Coverity issue: 328509, 328519, 328523
Fixes: e0dcf94a0d ("net/ice: support VLAN ops")
Fixes: ff963bfa7c ("net/ice: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Rx queue setup function checks configured MTU to make sure that
no oversized packets can be received. But a following call to
set MTU function might make this check irrelevant.
Add a function to check MTU size against Rx buffer size and
additional Rx queue info, including Rx scatter offload.
Fixes: e961cf425e ("net/sfc: support MTU change")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If there is the support of DevX is exposed by rdma-core but
DevX is not supported by or disabled for the specific interface
the mlx5_devx_cmd_query_hca_attr() routine returns an error
preventing the device from successful probing. The routine
should be invoked only in case of enabled DevX.
Fixes: e2b4925ef7 ("net/mlx5: support Direct Rules E-Switch")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
In mlx5_rxq.c, in some comments, text includes "Tx" instead of "Rx".
In mlx5_txq.c, in some comments, text includes "Rx" instead of "Tx".
This patch fixes these typos.
Fixes: faf2667fe8 ("net/mlx5: separate DPDK from verbs Tx queue objects")
Fixes: a1366b1a2b ("net/mlx5: add reference counter on DPDK Rx queues")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
All the library calls must be called via the glue layer.
Fixes: b2177648b8 ("net/mlx5: add Direct Rules flow data alloc/free routines")
Fixes: 79e35d0d59 ("net/mlx5: share Direct Rules/Verbs flow related structures")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Looking for an ethdev port is better (and more efficient)
with an ethdev API than an EAL one.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The flow group should be initialized.
For example selecting if the encapsulation is for root or private tables
is based on the flow->group value.
Fixes: 4f84a19779 ("net/mlx5: add Direct Rules API")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
stats_reset has been missed when support stats in iavf driver.
This patch add statistics reset function.
Fixes: f4a41a6953 ("net/avf: support stats")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When sending synchronous IPC requests, the caller must free the response
buffer if the request was successful and reply is no longer needed.
Fix the code to correctly
use the IPC API.
Bugzilla ID: 228
Fixes: c9aa56edec ("net/tap: access primary process queues from secondary")
Cc: stable@dpdk.org
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Compiling on Fedora 30, we get the following warning, causing build failure
when Werror flag is set:
../drivers/net/ixgbe/ixgbe_rxtx.c:2141:14: warning:
‘nmb’ may be used uninitialized in this function [-Wmaybe-uninitialized]
2141 | rxe->mbuf = nmb;
| ~~~~~~~~~~^~~~~
Initializing the value to "NULL" fixes the issue.
Fixes: 8eecb3295a ("ixgbe: add LRO support")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
As flagged by coverity, the "info" structure is being explicitly
dereferenced before being checked later for a NULL value.
Coverity issue: 277241
Fixes: 98e60c0d43 ("net/i40e: add module EEPROM callbacks for i40e")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
Coverity flags that the txq variable is used before it's checked for NULL.
Also fix typo in error message.
Coverity issue: 195023
Fixes: 24853544c8 ("net/i40e: fix mbuf free in vector Tx")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
The function rte_eal_cleanup() was introduced more than one year ago,
in DPDK 18.02. It is no longer experimental, allowing
pdump, proc-info and hotplug_mp apps to not need any experimental API.
The function rte_ctrl_thread_create() was introduced one year ago
in DPDK 18.05. It is no longer experimental, allowing
KNI PMD and TEP example to not need any experimental API.
The functions rte_socket_count() and rte_socket_id_by_idx() were
introduced one year ago in DPDK 18.05. They are no longer experimental.
The function rte_dev_is_probed() was introduced half a year ago
in DPDK 18.11. It is no longer experimental.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
A successful call to rte_mp_request_sync does not guarantee that there
are any messages in the buffer, and this should be checked for before
accessing data in the message. Buffer can be empty if IPC is disabled or
if we decide to ignore replies.
Fixes: c9aa56edec ("net/tap: access primary process queues from secondary")
Cc: stable@dpdk.org
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This driver defines lots of functions (like init_rss) which are intended
to only be used in this device. But when doing static linking these
global functions cause link failures when similar function name is
used in application.
This patch prefixes all functions defined in cxgbe.h with cxgbe_
to avoid these kind of conflicts.
Fixes: bfcb257d30 ("net/cxgbe: enable RSS for VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
This patch introduces:
- VMxnet3 v4 negotiation and,
- entirely guest-driven UDP RSS support.
VMxnet3 v3 already has UDP RSS support, however it
depends on hypervisor provisioning on the VM through
ESX specific flags, which are not transparent or known
to the guest later on.
Vmxnet3 v4 introduces a new API transaction which allows
configuring RSS entirely from the guest. This API must be
invoked after device shared mem region is initialized.
IPv4 ESP RSS (SPI based) is also available, but currently
there are no ESP RSS definitions on rte_eth layer to
handle that.
Signed-off-by: Eduard Serra <eserra@vmware.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Add validation to pointer constructed from the IPv4 header length
in order to prevent malformed packets from generating a potential
out of bounds memory read.
Fixes: 09150784a7 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
This commit adds support for drop action when creating E-Switch flow
using DV.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Actions like encap/decap, modify header require setting the flow table
type. Until now we supported only Nic RX and Nic TX, this commits adds
the support for FDB table type for those actions.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
In current implementation the DV steering supported only NIC steering.
This commit adds the transfer attribute in order to create a matcher
on the FDB tables.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This commit checks the for DR E-Switch support.
The support is based on both Device and Kernel.
This commit also enables the user to manually disable this this feature.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The meson build was missing the define for Direct Rules.
Fixes: 4f84a19779 ("net/mlx5: add Direct Rules API")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Modify the translate vport function to match other translate items
naming conventions.
Fixes: 0fe3f18f78 ("net/mlx5: add source vport match to the ingress rules")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
According to RTE flow the action order should be the order that the
actions were given.
In the case of modify actions the position of the action was always
last.
This commit solves this issue by saving the position of the first modify
action, and then adds to this position the pointer to the modify action.
Fixes: 4bb14c83df ("net/mlx5: support modify header using Direct Verbs")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Currently the allocation of the jump to QP is done in flow apply,
this results in memory leak.
This patch fixes this issue by moving the allocation and release of the
jump to QP action to the responsibility of the hrxq.
Fixes: cbb66daa3c ("net/mlx5: prepare Direct Verbs for Direct Rule")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
On BlueField platform we have the new entity - PF representor.
This one represents the PCI PF attached to external host on the
side of ARM. The traffic sent by the external host to the NIC
via PF will be seem by ARM on this PF representor.
This patch refactors port recognizing capability on the base of
physical port name. We have two groups of name formats. Legacy
name formats are supported by kernels before ver 5.0 (being
more precise - before the patch [1]) or before Mellanox OFED 4.6,
and new naming formats added by the patch [1].
Legacy naming formats are supported:
- missing physical port name (no sysfs/netlink key) at all,
master is assumed
- decimal digits (for example "12"), representor is assumed,
the value is the index of attached VF
New naming formats are supported:
- "p" followed by decimal digits, for example "p2", master
is assumed
- "pf" followed by PF index concatenated with "vf" followed by
VF index, for example "pf0vf1", representor is assumed.
If index of VF is "-1" it is a special case of host PF
representor, this representor must be indexed in devargs
as 65535, for example representor=[0-3,65535] will
allow representors for VF0, VF1, VF2, VF3 and for host PF.
Note: do not specify representor=[0-65535], it causes devargs
processing error, because number of ports (rte_eth_dev) is
limited.
Applications should distinguish representors and master devices
exclusively by device flag RTE_ETH_DEV_REPRESENTOR and do not
rely on switch port_id (mlx5 PMD deduces ones from representor_id)
values returned by dev_infos_get() API.
[1] https://www.spinics.net/lists/netdev/msg547007.html
Linux-tree: c12ecc23 (Or Gerlitz 2018-04-25 17:32 +0300)
"net/mlx5e: Move to use common phys port names for vport representors"
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
mlx4 driver has a global list of Memory Regions created by
device, and there is a ml4_mr_release() routine which makes
a memory cleanup at device closing. The head of device MR list
was fetched outside the rwlock protected section. Also some
noticed typos are fixed.
Fixes: 9797bfcce1 ("net/mlx4: add new memory region support")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
mlx5 driver has a global list of Memory Regions created by
device, and there is a ml5_mr_release() routine which makes
a memory cleanup at device closing. The head of device MR list
was fetched outside the rwlock protected section. Also some
noticed typos are fixed.
Fixes: 974f1e7ef1 ("net/mlx5: add new memory region support")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
