Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch stopped LLDP by default to avoid the statistics error.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
No need to add additional vlan tag size for max packet size, since
for i40e, the queue's Rx Max Frame Size (rxq->max_pkt_len) already
includes the vlan header size.
Fixes: a3c83a2527 ("net/i40e: enable runtime queue setup")
Fixes: 4861cde461 ("i40e: new poll mode driver")
Fixes: c1715402df ("i40evf: fix jumbo frame support")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
The result of the endian conversion was not being used incorrectly.
Fixes: b11cceb83a ("net/bnxt: support timesync")
Cc: stable@dpdk.org
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
The vlan pattern handler currently assumes the NIC always strips vlan
header from the L2 buffer, regardless of the vlan strip setting. But,
with older VIC models, the vlan header is actually present in the L2
buffer if stripping is disabled. So in this case, the inner ether type
needs to be shifted by that much.
Fixes: 6ced137607 ("net/enic: flow API for NICs with advanced filters enabled")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Currently, the raw item is always preceded by a UDP header, and both
land in the L4 pattern buffer. So consider the UDP header size when
checking if the raw spec fits in the L4 buffer.
Coverity issue: 336796, 336850
Fixes: 477959e6ee ("net/enic: enable limited support for raw flow item")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
UAR (User Access Region) register does not need to be remapped for
primary process but it should be remapped only for secondary process.
UAR register table is in the process private structure in
rte_eth_devices[],
(struct mlx4_proc_priv *)rte_eth_devices[port_id].process_private
The actual UAR table follows the data structure and the table is used
for both Tx and Rx.
For Tx, BlueFlame in UAR is used to ring the doorbell.
MLX4_TX_BFREG(txq) is defined to get a register for the txq. Processes
access its own private data to acquire the register from the UAR table.
For Rx, the doorbell in UAR is required in arming CQ event. However, it
is a known issue that the register isn't remapped for secondary process.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
UAR (User Access Region) register does not need to be remapped for
primary process but it should be remapped only for secondary process.
UAR register table is in the process private structure in
rte_eth_devices[],
(struct mlx5_proc_priv *)rte_eth_devices[port_id].process_private
The actual UAR table follows the data structure and the table is used
for both Tx and Rx.
For Tx, BlueFlame in UAR is used to ring the doorbell.
MLX5_TX_BFREG(txq) is defined to get a register for the txq. Processes
access its own private data to acquire the register from the UAR table.
For Rx, the doorbell in UAR is required in arming CQ event. However, it
is a known issue that the register isn't remapped for secondary process.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Queue index is redundantly stored for both Rx and Tx structures.
E.g. txq_ctrl->idx and txq->stats.idx. Both are consolidated to single
storage - rxq->idx and txq->idx.
Also, rxq and txq are moved to the beginning of its control structure
(rxq_ctrl and txq_ctrl) for cacheline alignment.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Max frame size setup should consider double VLAN case.
Fixes: ae2bdd0219 ("net/ice: support MTU setting")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If rdma-core library doesn't support remapping UAR registers, the register
shouldn't be unmapped on device stop.
Fixes: 0203d33a10 ("net/mlx4: support secondary process")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
In case of cross compilation on aarch64 we must add include for
stdlib in order to use the free function.
Fixes: cbb66daa3c ("net/mlx5: prepare Direct Verbs for Direct Rule")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Call to CPP read (nfp_cpp_readl()) can fail, return 0 on fail.
If the call to _nfp6000_cppat_mu_locality fails, the function needs
to return with an error.
If the nfp_cpp_readl() call fails just returns 0.
Coverity issue: 277209, 277215, 277225
Fixes: c7e9729da6 ("net/nfp: support CPP")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Although it is rather unlikely getting 0 as the descriptor handle, better
to contemplate that possibility.
Coverity issue: 195018
Fixes: 896c265ef9 ("net/nfp: use new CPP interface")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The boolean value was assigned to Tx flag twice, so it could cause bug
whenever Rx checksum will not be supported and Tx will be.
Coverity issue: 336831
Fixes: 117ba4a604 ("net/ena: get device info statically")
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
At the mlx5 device closing the shared IB context was destroyed
before cleanup routines completion. As it was found on some
setups (Netlink fails with old kernel drivers and we have to use
sysfs to retrieve interface index, this requires IB device name,
which is stored in shared context) the mlx5_nl_mac_addr_flush()
requires IB device name, and if shared context is removed it
causes the segmentation fault.
Fixes: 17e19bc4dd ("net/mlx5: add IB shared context alloc/free functions")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Retrieving network interface index via Netlink fails in
case of old ib_core kernel driver installed - mlx5_nl_ifindex()
routine fails due to RDMA_NLDEV_ATTR_NDEV_INDEX attribute is not
supported by the old driver.
The patch allowing to retrieve the network interface index and
name via Netlink [1]. So, the problem depends on ib_core module
version - 4.16 supports getting ifindex via Netlink, 4.15 does not.
This error was ignored in previous versions of MLX5 PMD probing
routine. For single device ifindex was retrieved via sysfs
and link control was not lost, so problem just was not noticed.
In order to support MLX5 PMD functioning over old kernel driver
this patch adds ifindex retrieving via sysfs into probing routine.
It is worth to note this method works for master/standalone
device only.
[1] https://www.spinics.net/lists/linux-rdma/msg62948.html
Linux tree: 5b2cc79d (Leon Romanovsky 2018-03-27 20:40:49 +0300 270)
Fixes: ad74bc6195 ("net/mlx5: support multiport IB device during probing")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch implements the changes proposed in the deprecation
note[1]. Replace multiple color definitions in various places such as
rte_meter.h, rte_tm.h and rte_mtr.h with single rte_color defined
in rte_meter.h.
This is simple search and replace exercise without any implementation
change.
[1] https://mails.dpdk.org/archives/dev/2019-January/123861.html
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Rx refill in one bulk (which is just 8 descriptors) by default is too
aggressive and makes too many MMIO writes (Rx doorbells) if packet rate
is high. Setting default to 1/8 of Rx descriptors number shows good
performance results. Anyway it is a default value which may be
overridden by Rx configuration provided by application.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add new protocol type VXLAN-GPE support for UDP tunnel.
inner IP/TCP/UDP checksum and RSS configuration shared
the same implementation of VXLAN.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently, if requested MTU is bigger than mbuf size and scattered
receive is not enabled, setting MTU to that value fails.
This patch allows setting this special MTU when device is stopped,
because scattered_rx will be re-configured during next port start
and driver may enable scattered receive according new MTU value.
After this patch, driver may select different receive function
automatically after MTU set, according MTU values selected.
Signed-off-by: David Harton <dharton@cisco.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The driver must send its version information to the firmware, so
the firmware knows the driver is up. Otherwise, it will cause unexpected
OS package downloading when multiple driver instances running on the
same device.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch enable 10Mb/s link for ixgbe X553.
This new device has own device id of 0x15E4 and 0x15E5, so
ixgbe PMD driver need to special check when setup link for
these two types of device.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
We are going to share the Direct Rules and Direct Verbs flow
device data structures between master and representors in the
E-Switch configurations over multiport IB device.
The code of initializing and destroying these data is
moved to dedicated routines, this is just a preparation
step for actual data sharing.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Add a new PMD driver for AF_XDP which is a proposed faster version of
AF_PACKET interface in Linux. More info about AF_XDP, please refer to [1]
[2].
This is the vanilla version PMD which just uses a raw buffer registered as
the umem.
[1] https://fosdem.org/2018/schedule/event/af_xdp/
[2] https://lwn.net/Articles/745934/
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
When using Direct Rules we can add actions to jump between tables.
This is extra useful since rule insertion rate is much higher on other
tables compared to table zero.
If no group is selected the rule is added to group 0.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Adds calls to the Direct Rules API inside the glue functions.
Due to difference in parameters between the Direct Rules and Direct
Verbs some of the glue functions API was updated.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This is the first patch of a series that is designed to enable the
Direct Rules API.
The main difference between Direct Verbs and Direct Rules from API
perspective is that in Direct Rules each action has it's own create
function and the object itself is of type void.
In this patch I'm adding functions to generate actions that currently
are done without create action, and I'm changing the action type to be
void *, so in next patches only the glue functions will need to change.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Handle VXLAN and GENEVE TSO on EF10 native Tx datapath.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Said message cannot be considered as warning since
the PMD anyway reports available offload capabilities
by means of device info interface. Make this log
message informational and improve its formatting
by placing the text itself on the same line.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
As a result, code duplication will be avoided in the current
TSO implementations (EFX and EF10 native). The future patch to
add support for tunnel TSO will also reuse the new function.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Make Tx prepare function able to detect packets with invalid header
size when header linearization is required.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add descriptor space check to Tx prepare function to inform a caller
that a packet that needs more than maximum Tx descriptors of a queue
can not be sent.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tx offloads checks should be done in Tx prepare.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement tx_prepare callback. The implementation checks for anything
only in RTE debug mode. No checks are done otherwise because EF10
simple datapath ignores Tx offloads.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement tx_prepare callback and update Tx burst function accordingly.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement generic checks in Tx prepare function and update Tx burst
function accordingly.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Numbers of extra descriptors required for TSO are EF10-specific
in fact. Highlight it in define names.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Move the check inside xmit function to the branch in which
the check is mandatory. It makes case when TSO header is not
fragmented a bit more faster.
Fixes: 6bc985e411 ("net/sfc: support TSO in EF10 Tx datapath")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Move the check inside xmit function to the branch in which
the check is mandatory. It makes case when TSO header is not
fragmented a bit more faster.
Fixes: fec33d5bb3 ("net/sfc: support firmware-assisted TSO")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The API that was defined in OFED 4.5 was replaced both in OFED 4.6 and
in upstream.
This commit updates the API to match the upstream one.
Fixes: f5bf91de73 ("net/mlx5: support flow counters using devx")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Iterating over siblings was done with RTE_ETH_FOREACH_DEV()
which skips the owned ports.
The new iterators RTE_ETH_FOREACH_DEV_SIBLING()
and RTE_ETH_FOREACH_DEV_OF() are more appropriate and more correct.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The Memory Region (MR) for DMA memory can't be created from secondary
process due to lib/driver limitation. Whenever it is needed, secondary
process can make a request to primary process through the EAL IPC
channel (rte_mp_msg) which is established on initialization. Once a MR
is created by primary process, it is immediately visible to secondary
process because the MR list is global per a device. Thus, secondary
process can look up the list after the request is successfully returned.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
A new PMD parameter (mr_ext_memseg_en) is added to control extension of
memseg when creating a MR. It is enabled by default.
If enabled, mlx4_mr_create() tries to maximize the range of MR
registration so that the LKey lookup tables on datapath become smalle
and get the best performance. However, it may worsen memory utilization
because registered memory is pinned by kernel driver. Even if a page in
the extended chunk is freed, that doesn't become reusable until the
entire memory is freed and the MR is destroyed.
To make freed pages available immediately, this parameter has to be
turned off but it could drop performance.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The Memory Region (MR) for DMA memory can't be created from secondary
process due to lib/driver limitation. Whenever it is needed, secondary
process can make a request to primary process through the EAL IPC
channel (rte_mp_msg) which is established on initialization. Once a MR
is created by primary process, it is immediately visible to secondary
process because the MR list is global per a device. Thus, secondary
process can look up the list after the request is successfully returned.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
A new PMD parameter (mr_ext_memseg_en) is added to control extension of
memseg when creating a MR. It is enabled by default.
If enabled, mlx5_mr_create() tries to maximize the range of MR
registration so that the LKey lookup tables on datapath become smaller
and get the best performance. However, it may worsen memory utilization
because registered memory is pinned by kernel driver. Even if a page in
the extended chunk is freed, that doesn't become reusable until the
entire memory is freed and the MR is destroyed.
To make freed pages available immediately, this parameter has to be
turned off but it could drop performance.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Secondary process is not allowed to register MR due to a restriction of
library and kernel driver.
Fixes: 7e43a32ee0 ("net/mlx5: support externally allocated static memory")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
In order to support secondary process, a few features are required.
a) rdma-core library should allocate device resources using DPDK's
memory allocator.
b) UAR should be remapped for secondary processes. Currently, in order
not to use different data structure for secondary processes, PMD
tries to reserve identical virtual address space for both primary
and secondary processes.
c) IPC channel is necessary, which can be easily set with rte_mp APIs.
Through the channel, Verbs command FD is delivered to the secondary
process and the device stop/start event is also broadcast from
primary process.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
To support secondary process, the memory allocated by library such as
completion rings (CQ) and buffer rings (WQ) must be manageable by EAL,
in order to share it with secondary processes. With new changes in
rdma-core and kernel driver, it is possible to provide an external
allocator to the library layer for this purpose. All such resources
will now be allocated within DPDK framework.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
rte_eth_devices[] is not shared between primary and secondary process,
but a static array to each process. The reverse pointer of device
(priv->dev) becomes invalid if mlx4 supports secondary process.
Instead, priv has the pointer to shared data of the device,
struct rte_eth_dev_data *dev_data;
Two macros are added,
#define PORT_ID(priv) ((priv)->dev_data->port_id)
#define ETH_DEV(priv) (&rte_eth_devices[PORT_ID(priv)])
Cc: stable@dpdk.org
Suggested-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Rx/Tx burst function pointers are stored in the rte_eth_dev structure,
which is local to a process. Even though primary process replaces the
function pointers, secondary will not run the new ones. With rte_mp
APIs, primary can easily broadcast a request to stop/start the datapath
of secondary processes.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
There's more need to have PMD global data structure. This should be
initialized once per a process regardless of how many PMD instances are
probed. mlx5_init_once() is called during probing and make sure all the
init functions are called once per a process. Currently, such global
data and its initialization functions are even scattered. Rather than
'extern'-ing such variables and calling such functions one by one making
sure it is called only once by checking the validity of such variables, it
will be better to have a global storage to hold such data and a
consolidated function having all the initializations. The existing shared
memory gets more extensively used for this purpose. As there could be
multiple secondary processes, a static storage (local to process) is also
added.
As the reserved virtual address for UAR remap is a PMD global resource,
this doesn't need to be stored in the device priv structure, but in the
PMD global data.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Socket API is used for IPC in order for secondary process to acquire
Verb command file descriptor. The FD is used to remap UAR address.
The multi-process APIs (rte_mp) in EAL are newly introduced.
mlx5_socket.c is replaced with mlx5_mp.c, which uses the new APIs.
As it is PMD global infrastructure, only one IPC channel is established.
All the IPC message types may have port_id in the message if there is
need to reference a specific device.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
As the memory event is propagated to secondary processes, the event is
processed redundantly. This should be processed once because the data
structure used for MR and the event is global across the processes.
Fixes: 974f1e7ef1 ("net/mlx5: add new memory region support")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When replenishing mbufs on Rx, buffer address (mbuf->buf_addr) should be
loaded. non-x86 processors (mostly RISC such as ARM and Power) are more
vulnerable to load stall. For x86, reducing the number of instructions
seems to matter most.
For x86, this is simply a load but for other architectures, it is
calculated from the address of mbuf structure by rte_mbuf_buf_addr()
without having to load the first cacheline of the mbuf.
Fixes: 12d468a62b ("net/mlx5: fix instruction hotspot on replenishing Rx buffer")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
MC firmware is the core component of FSLMC bus and DPAA2 devices.
Prior to this patch, MC firmware supported 10.10.x version. This
patch bumps the min supported version to 10.14.x.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Using the size of the source string is incorrect when printing using
snprintf. Instead pass in the buffer size to be used appropriately.
Fixes: 457ecf2953 ("bond: add debug info for mode 6")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This commit sets the min and max supported MTU values for igb devices
via the eth_igb_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max MTU is calculated as the max packet length
supported minus the transport overhead. To aid in these calculations
a new MACRO 'E1000_ETH_OVERHEAD' has been introduced to consolidate
overhead calculation and avoid duplication.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for ixgbe VF
devices via the ixgbevf_dev_set_mtu() function. Min MTU supported is
set to ETHER_MIN_MTU and max MTU is calculated as the max packet length
supported minus the transport overhead. As transport overhead is the
same for VF and PF ixgbe devices, reuse MACRO 'IXGBE_ETH_OVERHEAD' to
avoid duplication.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for ixgbe devices
via the ixgbe_dev_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max MTU is calculated as the max packet length
supported minus the transport overhead. To aid in these calculations
a new MACRO 'IXGBE_ETH_OVERHEAD' has been introduced to consolidate
overhead calculation and avoid duplication.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for i40e VF
devices via the i40evf_dev_info_get() function. Min MTU supported
is set to ETHER_MIN_MTU and max MTU is calculated as the max packet
length supported minus the transport overhead.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for i40e devices
via the i40e_dev_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max mtu is calculated as the max packet length
supported minus the transport overhead.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Device speed capability should be specified based on different PHY types
instead of a fixed value, this patch fix the issue.
Fixes: 690175ee51 ("net/ice: support getting device information")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Since previous test is for mtu < 1519 the next else if
is always true. This causes the lgtm static tool to complain.
Not a real issue, just cosmetic.
Fixes: 76d4c652e0 ("virtio: add extended stats")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Since previous test is for mtu < 1519 the next else if
is always true. This causes the lgtm static tool to complain.
Not a real issue, just cosmetic.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
For E-Switch configurations over multiport Infiniband devices
we should add source vport match to correctly distribute
traffic between representors.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch modifies asynchronous event handler to support multiport
Infiniband devices. Handler queries the event parameters, including
event source port index, and invokes the handler for specific
devices with appropriate port_id.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
We are implementing the support for multiport Infiniband device
with representors attached to these multiple ports. Asynchronous
device event notifications (link status change, removal event, etc.)
should be shared between ports. We are going to implement shared
event handler and this patch introduces appropriate device
structure changes and updated event handler install and uninstall
routines.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The code is updated to provide IB port index for the Verbs
objects being created - QPs and Verbs Flows.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The code is updated to use the shared IB device context and
device handles. The IB device context is shared between
reprentors created over the single multiport IB device. All
Verbs and DevX objects will be created within this shared context.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The code is updated to use the shared IB device attributes,
located in the shared IB context. It saves some memory if
there are representors created over the single Infiniband
device with multiple ports.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The PMD code is updated to use Protected Domain from the
shared IB device context. The Domain is shared between
all devices belonging to the same multiport Infiniband device.
If IB device has only one port, the PD is not shared, because
there is only ethernet device created over IB one.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The IB device names are moved from device private data
to the shared context, code involving the names is updated.
The IB port index treatment is added where it is relevant.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The Mellanox NICs support SR-IOV and have E-Switch feature.
When SR-IOV is set up in switchdev mode and E-Switch is enabled
we have so called VF representors in the system. All representors
belonging to the same E-Switch are created on the basis of the
single PCI function and with current implementation each representor
has its own dedicated Infiniband device and operates within its
own Infiniband context. It is proposed to provide representors
as ports of the single Infiniband device and operate on the
shared Infiniband context saving various resources. This patch
introduces appropriate structures.
Also the functions to allocate and free shared IB context for
multiport are added. The IB device context, Protection Domain,
device attributes, Infiniband names are going to be relocated
to the shared structure from the device private one.
mlx5_dev_spawn() is updated to support shared context.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
mlx5_pci_probe() routine is refactored to probe the ports
of found Infiniband devices. All active ports (with attached
network interface), belonging to the same Infiniband device
will use the single shared Infiniband context of that device.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
There is the routine mlx5_nl_portnum() added to get
the number of ports of multiport Infiniband device.
It is assumed the Uplink/VF representors are attached
on these ports.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
There is the routine mlx5_nl_ifindex() returning the
network interface index associated with Infiniband device.
We are going to support multiport IB devices, now function
takes the IB port as argument and returns ifindex associated
with tuple <IB device, IB port>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The master device and VF representors were distinguished by
presence of port name, master device did not have one. The new Linux
kernels starting from 5.0 provide the port name for master device
and the implemented representor recognizing method does not work.
The new recognizing method is based on querying the VF number,
has been created on the base of the device.
The IFLA_NUM_VF attribute is returned by kernel if IFLA_EXT_MASK
attribute is specified in the Netlink request message.
Also the presence check of device symlink in device sysfs folder
is added to distinguish representors with sysfs based method.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
We are consistently passing 1 as the argument in the data path,
so there is no need to define avail/used flags as function-like
macros anymore. This patch changes the avail and used flags to
constants. And a frequently used combination is also introduced.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixes the multi-process support for virtio-user.
Currently virtio-user just provides some limited secondary
process supports. Only some basic operations can be done in
secondary process on virtio-user port, e.g. getting port stats.
Actions which will trigger the communication with vhost backend
can't be done in secondary process for now, as the fds are
not synced between processes. The processing of server mode
devargs is also moved into virtio_user_dev_init().
Fixes: cdb068f031 ("bus/vdev: scan by multi-process channel")
Fixes: ee27edbe0c ("drivers/net: share vdev data to secondary process")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
"The macro name '_VHOST_NET_USER_H' of this include guard is used
in 2 different header files."
lib/librte_vhost/vhost_user.h has the same include guard.
Renamed the include guard in vhost.h to differentiate.
Fixes: 6a84c37e39 ("net/virtio-user: add vhost-user adapter layer")
Cc: stable@dpdk.org
Signed-off-by: Andrius Sirvys <andrius.sirvys@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Add functions to set the link state up or down.
Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Since the VLAN header is stripped from mbuf data, PKT_RX_VLAN_STRIPPED
should be set in offload flag.
Fixes: 6b59a3bc82 ("fm10k: fix VLAN in Rx mbuf")
Fixes: 7092be8437 ("fm10k: add vector Rx")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Add implementation for probe in secondary.
Failsafe will attempt to attach all the sub-devices in
secondary process.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
In multiprocess context, the pointer to sub-device is shared between
processes. Previously, it was a pointer to per process eth_dev so
it's needed to replace this dependency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
In multiprocess context, the sub-device structure is shared
between processes. The reference to the failsafe device was
a per process pointer. It's changed to port id which is the
same for all processes.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
In multiprocess context, the private structure is shared between
processes. The back reference from private to generic data was using
a pointer to a per process eth_dev. It's now changed to a reference of
the shared data.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This patch fixes the build failure with message:
drivers/net/mlx5/mlx5_ethdev.c: In function ‘mlx5_sysfs_switch_info’:
drivers/net/mlx5/mlx5_ethdev.c:1381:3:
error: ignoring return value of ‘fscanf’, declared with attribute
warn_unused_result [-Werror=unused-result]
fscanf(file, "%s", port_name);
^
Which reproduces on Ubuntu 16.04 LTS with
gcc (Ubuntu 5.4.0-6ubuntu1~16.04.10) 5.4.0 20160609.
Fixes: b2f3a38101 ("net/mlx5: support new representor naming format")
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Dekel Peled <dekelp@mellanox.com>
The bnxt driver is not correctly setting the receive VLAN offload
flags. When VLAN is offloaded the driver must set the
PKT_RX_VLAN_STRIPPED flag.
Actually, several drivers have the same bug, only most of the
Intel drivers look right. Any driver that sets vlan_tci is probably
stripping the tag, and should be setting RX_VLAN_STRIPPED.
To quote rte_mbuf.h:
/**
* The RX packet is a 802.1q VLAN packet, and the tci has been
* saved in in mbuf->vlan_tci.
* If the flag PKT_RX_VLAN_STRIPPED is also present, the VLAN
* header has been stripped from mbuf data, else it is still
* present.
*/
Fixes: 2eb53b134a ("net/bnxt: add initial Rx code")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
A log message is required when provided RSS key is
not valid so that driver will use the default RSS key.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch enabled RSS for UPD/TCP/SCTP+IPV4/IPV6 packets.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If E810 download package failed, driver need to go to safe mode.
In the safe mode, some advanced features will not be supported.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch enables package downloading to the device. The package is
to be in the /lib/firmware/intel/ice/ddp directory and named ice.pkg.
The package is shared by the kernel driver and the DPDK PMD.
There is no per device package be supported so far, all the
devices can only download the same package. This limitation will
be removed in the future.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The return value from bus->find_device is a rte_device
which is not safe to cast to a rte_vdev_device structure.
It doesn't really matter since only being checked for NULL
but static checkers might find a bug here.
Fixes: 56252de779 ("net/vdev_netvsc: add automatic probing")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Matan Azrad <matan@mellanox.com>
Move all bit ops related functions from ice_osdep.h into ice_bitops.h.
Also remove the limitation that bitmap can only be 64 bits in
ice_set_bit and ice_clear_bit.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Revert the workaround for allocating TCAM and FV entries to align
with latest firmware.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
OS package's format is changed, field vector's protocol offset size is
changed from 8 bit to 16 bit. So base code also need to align to this,
or PMD will not be able to load OS package correctly.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. clean flow entry's action structure after remove it.
2. initialized priority when add a new flow entry
3. remove RSS configuration before deleting the flow profile.
Fixes: aa1cd410fa ("net/ice/base: add flow module")
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch ensure that TCAM allocations made by a newly added VSIG
that has the same characteristic list of an existing VSIG are removed.
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. Add call to replay RSS configurations
2. Add RSS configurations to end of list and not the head to avoid
inversion on replay.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add flow director related support base code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add module to support DCB related features.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Improved the profile reference counting, by moving it from being
based on how many TCAM entries using the profile to how many
profile map entries are using the profile.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Code added to check the FW recovery mode. This function will be
used by the drivers during init to check whether the FW is in
recovery mode or not. If FW is in recovery mode then the drivers
need to run in a recovery mode where it can allow only limited
operations. Link should be down, allow only certain AQ commands
etc.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If there is no queue to disable, return appropriate configuration error
earlier without acquiring the lock.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Klocwork points out some code is unreachable in
ice_get_itr_intrl_gran and ice_ptg_find_ptype.
The patch removed the unreachable code and resolved the static
analysis reported issues.
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Fixes: 453d087cca ("net/ice/base: add common functions")
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Update copyright time to 2019.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. Fix some problems with filling the HW tables.
2. Fix a logic error in ice_rem_prof_from_list.
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If allocating a VSI to a VSIG fails the local allocations made for VSIG
profiles and change-lists will not be removed. Adding calls to free
these entries on error in VSIG management calls.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Profile TCAM entry removal is handled by the firmware when
freeing the resource, so the driver does not need to write these
default entries back with an update Package action.
This patch removes writing of the TCAM entry using Update Package
command when removing it, since the entry has already been freed
by firmware.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add define for 52 byte RSS hash key size, and add struct
ice_aqc_get_set_rss_keys comments regarding setting 40 bytes and
52 byte hash key.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Extend the functionality of the admin queue command by including
additional status and ID bits to improve link topology configuration.
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In the ice_aq_set_phy_cfg AQ command, the 16.4 bit is reserved.
This patch will make sure that this bit will never be set to 1.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The patch added to retrieve the queue context and update the queue
handle for lan queues.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Change below function as static and also relocated code line
to align with kernel driver.
ice_aq_move_sched_elems
ice_sched_get_agg_node
ice_sched_set_node_bw_lmt
ice_sched_cfg_node_bw_alloc
ice_sched_add_agg_cfg
ice_sched_rm_agg_cfg
ice_sched_move_vsi_to_agg
ice_sched_del_rl_profile
ice_sched_rm_unused_rl_prof
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Update macros for metadata and package flags.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ICE_SW_LKUP_LAST need to be handled correctly in
ice_aq_alloc_free_vsi_list and ice_update_vsi_list_rule
2. ICE_SW_LKUP_ETHERTYPE_MAC need to be handled correctly in
ice_update_vsi_lkup_fltr
3. free package segment pointer during ice_deinit_hw
Fixes: c7dd159311 ("net/ice/base: add virtual switch code")
Fixes: 453d087cca ("net/ice/base: add common functions")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_rem_all_sw_rules_info - remove all switch rules.
2. ice_reply_all_fltr - replay all filters stored in book keeping list.
These APIs will be used when switch rule feature is enabled.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_add_mac_with_sw_marker - add filter with software marker.
2. ice_add_mac_with_counter - add filter with counter enabled.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_get_vsi_promisc - get promiscuous mode of give VSI.
2. ice_get_vsi_vlan_promisc - get VLAN promiscuous mode of given VSI.
PMD may use these APIs to check the real HW status, but not rely on
a software flag when something abnormal.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_alloc_res_cntr - allocate resource counter
2. ice_free_res_cntr - free resource counter
3. ice_alloc_vlan_res_counter - allocate vlan resource counter
4. ice_free_vlan_res_counter - free vlan resource counter
These APIs will be used when try to count the number of a flow be
hit.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_aq_get_res_alloc - get allocated resources.
2. ice_aq_get_res_descs - get allocated resource descriptors.
These APIs may help to PMD to enable some debug utilities to
dump the resource allocation status.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add API ice_remove_eth_mac and ice_add_eth_mac to support
adding / removing ethertype (or MAC) based filter rules.
PMD driver can use these APIs to enable related rte_flow rule.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Added code to allocate VSI queue contexts to save the queue specific
information like bandwidth etc.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add below APIs in switch module
1. ice_aq_get_vsi_params - get VSI context info
2. ice_aq_add_update_mir_rule - add/update mirror rule
3. ice_aq_delete_mir_rule - delete mirror rule
4. ice_aq_set_storm_ctrl - set storm control configuration
5. ice_aq_get_storm_ctrl - get storm control configuration
PMD can use these APIs to enable mirror rule and storm control
related features.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Remove static of below functions and declare them as external
APIs.
ice_aq_add_vsi
ice_aq_free_vsi
ice_aq_update_vsi
ice_aq_add_lan_txq
ice_init_pkg
So far the purpose is just to sync with kernel driver.
They are reserved for future use.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Remove unnecessary macro and data structure.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
For components that make a copy of an external pipeline package file
(i.e. the Linux and FreeBSD drivers), save the size of the package
file along with the copy so that both can be used when calling
ice_init_pkg() after a CORER/GLOBR reset.
Also, do not free the copy of the package file in ice_init_pkg()
since it is needed afterward for subsequent resets.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. Add macro ice_for_each_traffic_class to loop for each
traffic class.
2. Add macro MIN_T to wrap min with type conversion.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add two helper functions in common module.
1. ice_aq_set_mac_cfg to help configure maximum frame size with AQ
command
2. ice_get_ctx help to extract context bits from a packet structure.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Improve comments to follow naming rules.
Also the patch include some minor cleanup.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add two APIs ice_alloc_sw and ice_free_sw to support
switch related resource allocation and free.
These APIs are required when we enable switch flow.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>