Add extra commands to command line to allow enable/disable of
per-core turbo.
When a core has turbo enabled, calling for max frequency will allow it to
go to a turbo frequency (P0n).
When a core has turbo disabled, calling for max frequency will allow it to
go to the maximum non-turbo frequency (P1), but not beyond.
Signed-off-by: David Hunt <david.hunt@intel.com>
Ferruh will co-maintain the main branch at git://dpdk.org/dpdk.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Yuanhan was maintaining 16.07, 17.02 and 17.05 branches.
He is still doing LTS releases for 16.11.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The script git-log-fixes.sh (used in check-git-log.sh) looks
for git tags to find the version where a bug is introduced.
In DPDK 17.08, the script has been fixed to ignore tags from
non current branch.
It was using the option --merged which was introduced in git 2.7.0.
As git 2.7.0 is not so old, a fallback is provided for some years.
The fallback is replacing the tag --merged option by a branch filter.
If the tag is found in the branch, the branch name is replaced
by the tag.
This script could be improved to allow using another reference branch,
instead of hard coding HEAD branch (the current one).
Fixes: 26857dabb3 ("devtools: ignore non merged tags for backport")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Some compilers detect this error:
error: ‘ids[0]’ may be used uninitialized in this function
ret = rte_service_map_lcore_set(i, ids[lcore_iter], 1);
It can be reproduced very easily on Fedora 21 with
gcc-4.9.2-6.fc21.x86_64.
Fixes: 21698354c8 ("service: introduce service cores concept")
Cc: stable@dpdk.org
Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
rte_cfgfile_section_num_entries_by_index() is added to get the number of
entries of a section when multiple sections of the same name are
present.
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
lcore_states store the state of the lcore. Fixing the invalid
dereference of lcore_states with service number
Unit test case service_lcore_start_stop fails with the above fix.
Service core was stopped without stopping the service.
This commit fixes the test by adding negative and positive cases of
stopping the service lcore before and after stopping the service
respectively
Fixes: 21698354c8 ("service: introduce service cores concept")
Fixes: f038a81e1c ("service: add unit tests")
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Add a section on the service cores API changes to 17.11 release notes.
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit adds a section to the service register function
to make it clear that registering a service, must not configure
service-cores (eg: adding lcores or changing mappings).
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit adds a new flag that the component (or "backend")
can use to indicate readyness. The service function callback
will not be called until the component sets itself as ready.
The use-case behind adding this feature is eg: a service that
requires configuration before it can start. Any service that
emulates an ethdev will have rte_eth_dev_configure() called,
and only after that the service will know how many queues/etc
to allocate. Once that configuration is complete, the service
marks itself as ready using rte_service_component_runstate_set().
This feature request results from prototyping services, and
requiring a flag in each service to note "internal" readyness.
Instead that logic is now lifted to the service library.
The unit tests have been updated to test the component runstate.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This aligns with the service stats, which are currently
also reset on read. A generic statistics API would be
helpful for the service library in future.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit ensures that after an lcore is added, that
it is in the WAIT state. Previously, adding an lcore did
not ensure that the core was ready for being relaunch, which
would cause errors during lcore_start(). Now that the lcore is
ensured to be in WAIT state by the lcore_add() function, this
is no longer an issue.
Fixes: 21698354c8 ("service: introduce service cores concept")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Previously to this commit, the return value of the following
functions was the mask value, instead of a neat 0 or 1.
This commit fixes this using the "!!" trick, to force the
number to 1 instead of the bitmask value itself, bringing
the return value in line with the function documentation.
Fixes: 21698354c8 ("service: introduce service cores concept")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Services can be registered and unregistered, and "holes" can
appear in the contiguous array of services if a service is
unregistered. As a result, we must never iterate to the
number of services (as counted by rte_service_count), instead
scanning the service array and checking if the service is valid.
After this commit, the rte_service_count variable is only used
for its intended purpose; tracking the number of services that
are present.
Fixes: 21698354c8 ("service: introduce service cores concept")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit fixes an issue in the service runner function,
where the atomic value was not cleared on exiting the service
function. This resulted in future attempts to run the service
to appear like the function was running, however it was in
reality deadlocked.
This commit refactors the atomic handling to be more readable,
by splitting the implementation code into a new static inline
function. The remaining flow control of atomics in the existing
function is refactored for readability.
Fixes: 21698354c8 ("service: introduce service cores concept")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit reworks the service_get_by_name() function to
accept an integer, and removes the service_get_by_id() function.
All functions now accept an integer argument representing the
service, so it is no longer required to expose the service_spec
pointers to the application.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit reworks the unregister API to accept an integer.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit reworks the statistics functions to use integer ids
for services instead of pointers. Passing UINT32_MAX to the dump
function prints all info, similar to passing NULL previously.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit reworks the API to move from two separate start
and stop functions, to a "runstate" API which allows setting
the runstate. The is_running API is replaced with an function
to query the runstate. The runstate functions take a id value
for service. Unit tests and the eventdev sw pmd are updated.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit reworks the service register function to accept
an extra parameter. The parameter is a uint32_t *, which when
provided will be set to the integer service_id that the newly
registered service is represented by.
This is useful for services that wish to validate settings at
a later point in time - they need to know their own service id.
This commit updates the eventdev sw pmd, as well as unit tests
to use the new register API.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit updates the APIs exposed to map service cores and
services. The previous APIs required a pointer to a service,
and used two separate functions for enable and disable. The
new API uses an integer ID for the service and has a parameter
for map or unmap. Unit tests are updated and passing, and the
map file is updated to the new function names.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit adds a macro to easily validate a service ID, and then
lookup the service pointer, or return a user-specified error code.
This macro will be heavily used in the following patches as it will
be ID based instead of pointer-based.
The probe_capability function is reworked to use an integer ID instead
of a pointer. Rework the service_get_name() function is updated to use
IDs. Unit tests are updated to keep things compiling after each commit.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This new API returns the number of services that are running on a specific
service core. It allows an application to decide which service core to run
a new service on.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit zeros out the elf_info struct at startup of the
pmdinfogen code. If it is not zeroed, later in the code gcc
produces "may be unused" prints. Clang does not report any
issue.
This issue is only observed when compiling pmdinfogen as an
optimized build, hence this warning is not disabled in the
existing Makefile.
This commit enables a simplification in the meson build
system, removing the requirement for "-Wno-maybe-uninitialized".
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When PF is reset, a message will show it and all its
VF need to be reset.
User can run the command "port reset port_id"
to reset the VF port and to keep same port id without
any configuration. Then user can run "port stop port_id"
and "port start port_id" to reconfigure its forwarding
mode and parameters as previous ones.
To avoid crash, current forwarding should be stopped
before running "port reset port_id".
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reset a NIC by calling dev_uninit() and then dev_init().
Go through the same way in NIC PCI remove without release
of ethdev resource and then NIC PCI probe function without
ethdev resource allocation.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Reset a NIC by calling dev_uninit and then dev_init.
Go through same way in NIC PCI remove without release of
ethdev resource and then NIC PCI probe function without
ethdev resource allocation.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch adds a new eth_dev layer API function rte_eth_dev_reset(),
which a DPDK application can call to reset a NIC and keep its port id
afterwards. It means that all software resources allocated in the ethdev
layer are kept, and software & hardware resources of the NIC within the
NIC's PMD are reset to a state simular to that obtained by calling the
PCI dev_uninit() and then dev_init(). This effective sequence of
dev_uninit() and dev_init() is packed into a single API function
rte_eth_dev_reset().
Please see the comments before the declaration of rte_eht_dev_reset()
in lib/librte_ether/rte_ethdev.h to get more details on why this
function is needed, what it does, when it should be called
and what an application should do after calling this function.
See also detailed explanations in the programmer's guide.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Reviewed-by: Remy Horton <remy.horton@intel.com>
The QAT crypto driver does not need to depend on the ether library, so
remove the unnecessary header inclusion.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
While almost all libraries have the library name match the directory name,
some libraries and drivers do not. For those that don't, some have the
version filename use the libname, e.g. null_crypto, others have it use the
directory name, e.g. ether. Using the library name seems the better
standard to follow, so rename rte_ether_version.map to
rte_ethdev_version.map.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The filenames of the linker map files for DPDK PMDs, all follow a
standard format: rte_pmd_<libname>_version.map. The ring version, however,
had eth instead of pmd in the name, so was non-standard. By changing
this, we no longer need the build system to explicitly be given the name of
the mapfile, as it can determine it from the directory name.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The filenames of the linker map files for DPDK libraries, all follow a
standard format: rte_<libname>_version.map. The ip_frag version, however,
was missing an underscore in the name, so was non-standard. By changing
this, we no longer need the build system to explicitly be given the name of
the mapfile, as it can determine it from the directory/library name.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The names of rte_gro_ctx_create() and rte_gro_ctx_destroy() in
rte_gro_version.map are incorrect. This patch is to fix this issue.
Fixes: e996506a1c ("lib/gro: add Generic Receive Offload API framework")
Cc: stable@dpdk.org
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add template release notes for DPDK 17.11 with inline
comments and explanations of the various sections.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Bumping the library version to reflect the ABI change, where
rte_event_pmd_pci_probe(), rte_event_pmd_pci_remove(),
rte_event_pmd_vdev_init(), rte_event_pmd_vdev_uninit()
functions removed from the library.
Fixes: b1b3d9f905 ("eventdev: make vdev init and uninit functions optional")
Fixes: 9a8269d569 ("eventdev: make PCI probe and remove functions optional")
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
librte_eventdev.so.1 was introduced in v17.05, and it missed to
update in release_17_05 release notes.
Fixes: 222555480a ("version: 17.05.0")
Cc: stable@dpdk.org
Reported-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
rte_cryptodev_allocate_driver() function gets one parameter
(rte_driver), as the cryptodev_driver structure is
allocated inside the function with rte_malloc.
This function is called from a constructor function,
when crypto PMDs are registered.
If malloc fails, there is no way to recover from it,
so it is better to allocate this structure
statically, in each PMD.
Therefore, it is required to add an extra parameter in
this function, to also get a pointer to this structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
In order to remove all dependencies on vdev for cryptodev,
the implementation of rte_cryptodev_vdev_pmd_init() function
needs to be moved to rte_cryptodev_vdev.h, and all crypto
vdevs will include it, and therefore, this function will
be removed as a public API.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Support for security operations is planned to be added
in ethdev and cryptodev for the 17.11 release.
For this following changes are required.
- rte_cryptodev and rte_eth_dev structures need to be added
new parameter rte_security_ops which extend support for
security ops to the corresponding driver.
- rte_cryptodev_info and rte_ethd_dev_info need to be added
with rte_security_capabilities to identify the capabilities of
the corresponding driver.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Boris Pismenny <borisp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
VMBUS support will use GUID in eth_dev_data name field which requires
at least 37 characters. Plan for increase in size now.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This is an API/ABI change notice for DPDK 17.11 announcing the redefinition
of port_id. port_id is currently defined as uint8_t, which is limited to
the range 0 to 255. A larger range is required for vdev scalability.
It is necessary for a redefinition of port_id to extend it from 1 bytes to
2 bytes. All ethdev APIs and usages related to port_id will be changed at
the same time.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The flag RTE_ETH_DEV_DETACHABLE will disappear.
This flag is not needed anymore following the hotplug work done for
v17.08. It can be removed, its function is now implicitly made available
by the relevant EAL and rte_bus implementations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
An API/ABI change is planned for 17.11 to change following
* Remove unused flag param from rte_mempool_generic_get and _put.
* Change data type for mempool 'flag' from int to unsigned int.
Refer [1].
* Add struct rte_mempool * param into func rte_mempool_xmem_size,
rte_mempool_xmem_usage to make it mempool aware.
Refer [2].
[1] http://dpdk.org/dev/patchwork/patch/25603/
[2] http://dpdk.org/dev/patchwork/patch/25605/
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When we run DPDK on guest or VFIO mode on host,
the dpdk library or device will not be directly accessing
the physical address. Instead, the device does go through
an IO address translation memory management unit. On x86,
we call it as IOMMU and on ARM as SMMU.
More details:
http://osidays.com/osidays/wp-content/uploads/2014/12/Final_OSI2014_IOMMU_DetailedView_Sanil_Anurup.pdf
Based on discussion in the following thread
http://dpdk.org/ml/archives/dev/2017-July/070850.html
We would like to change reference to physical address to more
appropriate name as with IOMMU/SMMU with
the device won't be dealing directly with the physical address.
An ABI change is planned for 17.11 to change following
data structure or functions to more appropriate name.
Currently planned to change it iova as instead of phys
Please note: The change will be only for the name and
functional aspects of the API will remain same.
Following functions/data structures name may change.
This list is based on v17.05-rc1. It may change based on v17.11 code base.
typedef:
phys_addr_t
structures:
struct rte_memseg::phys_addr
struct rte_mbuf::buf_physaddr
functions:
rte_mempool_populate_phys()
rte_mempool_populate_phys_tab()
rte_eal_using_phys_addrs()
rte_mem_virt2phy()
rte_dump_physmem_layout()
rte_eal_get_physmem_layout()
rte_eal_get_physmem_size()
rte_malloc_virt2phy()
rte_mem_phy2mch()
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>