Update document with flow and qos api support in softnic PMD.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Marko Kovacevic <marko.kovacevic@intel.com>
Introduce a new postcopy-support parameter to Vhost PMD that
passes the RTE_VHOST_USER_POSTCOPY_SUPPORT flag at vhost
device register time.
Flag should only be set if application does not prefault guest
memory using, for example, mlockall() syscall.
Default value is 0, meaning that postcopy support is disabled
unless specified explicitly.
Example to enable postcopy support for a given device:
--vdev 'net_vhost0,iface=/tmp/vhost-user1,postcopy-support=1'
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When using uio_pci_generic module or using legacy interrupt mode of
igb_uio or vfio, X550 cannot get interrupts. Because the Interrupt
Status bit is not implemented, then the irq cannot be handled correctly
and cannot report the event fd to DPDK apps.
Add this hw limitation and details into ixgbe known issue.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The config options for init and debug driver were replaced by
dynamic log levels.
Fixes: 70e28c612d65 ("net/liquidio: implement dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The ena driver has used dynamic log type to enable init debugging since
18.05 but the documentation still has leftover mention of the config
option.
Fixes: 8bc0acae970d ("net/ena: implement dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch add support for dumping MAC registers.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for EEPROM reading/writing.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
VLAN filters and VLAN offloads implementation.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for adding/removing MAC addresses.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for flow control feature.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for Receive Side Scaling feature.
RSS hash and reta table configuration.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for promiscuous/allmulticast modes configuration.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for Rx/Tx descriptors status information.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for device stats, xstats and queue stats
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Implement link interrupt, link info, link polling.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add RX/TX function prototypes for further datapath development.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Start, stop and reset are all done via hw_atl layer.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Makefile/meson build infrastructure, atl_ethdev minimal skeleton,
header with aquantia aQtion NIC device and vendor IDs.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Introduced DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flags and
PKT_TX_OUTER_UDP_CKSUM mbuf ol_flags to enable Tx outer UDP
checksum offload.
To use hardware Tx outer UDP checksum offload, the user needs to,
- enable following in mbuf:
a) fill outer_l2_len and outer_l3_len in mbuf
b) set the PKT_TX_OUTER_UDP_CKSUM flag
c) set the flag PKT_TX_OUTER_IPV4 or PKT_TX_OUTER_IPV6
- configure DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flags in slow path
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Introduced DEV_RX_OFFLOAD_OUTER_UDP_CKSUM Rx offload flag and
PKT_RX_OUTER_L4_CKSUM_* mbuf ol_flags to detect outer UDP checksum
status.
- To use hardware Rx outer UDP checksum offload, the user needs to
configure DEV_RX_OFFLOAD_OUTER_UDP_CKSUM offload flags in slowpath.
- Driver updates checksum status in mbuf ol_flag as
PKT_RX_OUTER_L4_CKSUM_* flags.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
At the moment, PCAP interfaces use dummy MAC by default. This change
adds support for selecting PCAP physical interface MAC with phy_mac=1
devarg. This allows to setup packet flows using the physical interface
MAC.
Signed-off-by: Juhamatti Kuusisaari <juhamatti.kuusisaari@coriant.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Implementation includes following limitations:
1) Packet's header length must be less than 256 (SFC_TSOH_STD_LEN);
2) Offset of the TCP header must be less than 208
(EF10_TCP_HEADER_OFFSET_LIMIT);
3) Number of Tx descriptors must be not less than number of descriptors
needed for TSO settings plus header plus one data segment.
If above conditions are not met, the packet is dropped.
If the maximum descriptor space is insufficient to hold entire TSO packet,
only a part of the packet is sent.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Based on PKT_TX_[TCP|UDP|SCTP]_CKSUM definition the user needs
to fill l2_len and l3_len mbuf fields before issuing HW Tx
checksum request.
Fixes: dad1ec72a377 ("doc: document NIC features")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Based on PKT_TX_IP_CKSUM definition the user needs
to fill l2_len and l3_len mbuf fields before issuing
HW Tx checksum request.
Fixes: dad1ec72a377 ("doc: document NIC features")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Update implementation that when PKT_RX_QINQ_STRIPPED mbuf ol_flags
set by PMD, PKT_RX_QINQ, PKT_RX_VLAN_STRIPPED & PKT_RX_VLAN
should be also set.
Clarify mbuf documentations that when PKT_RX_QINQ set PKT_RX_VLAN also
should be set.
So that appllication can rely on PKT_RX_QINQ flag to access both
mbuf.vlan_tci & mbuf.vlan_tci_outer
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
DV flow API is based on new kernel API and is
missing some functionality like counter but add other functionality
like encap.
In order not to affect current users even if the kernel supports
the new DV API it should be enabled only manually.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Add the vectorized version of the no-scatter Rx handler. It aims to
process 8 descriptors per loop using AVX2 SIMD instructions. This
handler is in its own file enic_rxtx_vec_avx2.c, and makefile and
meson.build are modified to compile it when the compiler supports
AVX2. Under ideal conditions, the vectorized handler reduces
cycles/packet by more than 30%, when compared against the no-scatter
Rx handler. Most implementation ideas come from i40e's AVX2 based
handler, so credit goes to its authors.
At this point, the new handler is meant for field trials, and is not
selected by default. So add a new devarg enable-avx2-rx to allow the
user to request the use of the new handler. When enable-avx2-rx=1, the
driver will consider using the new handler.
Also update the guide doc and introduce the vectorized handler.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Add enetc usage document to compile and run the
DPDK application on enetc supported platform.
This document introduces the enetc driver, supported
platforms and supported features.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add callback for updating information about link status/info.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Zyta Szpak <zr@semihalf.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add part of PMD for actual reception/transmission.
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Signed-off-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Zyta Szpak <zr@semihalf.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Support counter action for 1400 series adapters.
The adapter API for allocating and freeing counters is independent of
the adapter match/action API. If the filter action is requested, a
counter is first allocated and then assigned to the filter, and when
the filter is deleted, the counter must also be deleted.
Counters are DMAd to pre-allocated consistent memory periodically,
controlled by the define VNIC_FLOW_COUNTER_UPDATE_MSECS. The default is
100 milliseconds.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Document MTR (metering) and TM (traffic management) usage plus
do some small updates here and there.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
This patch introduces necessary changes required by MUSDK 18.09 library.
* As of MUSDK 18.09, pp2_cookie_t is no longer available. Now
RX descriptor cookie is defined as plain u64 so existing cast
is no longer valid.
* MUSDK 18.09 increased number of available bpools (buffer hw pools) by
introducing dma regions support. Update mvpp2 driver accordingly.
* replace MV_NET_IP4_F_TOS with MV_NET_IP4_F_DSCP
Before this patch, API allowed to configure a classification rule
according to IPv4 TOS, which was not supported in classifier. This patch
fixes this by using proper field.
* use 48 bit address mask
We cannot get pointers exceeding 48 bits thus using 48 bit
mask for extracting higher IOVA address bits is enough.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Yuval Caduri <cyuval@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Shlomi Gridish <sgridish@marvell.com>
Reviewed-by: Alan Winkowski <walan@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Change QoS configuration file syntax for port's default policer
setup.
Since default policer configuration is performed before
any other policer configuration we can pick a default id.
This simplifies default policer configuration since user
no longer has to choose ids from range [0, PP2_CLS_PLCR_NUM].
Explicitly document values for rate_limit_enable field.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
