Primary and secondary processes share a per-device private data. With
current design it is not possible to have data per-device per-process.
This is required for handling properly the CPP interface inside the NFP
PMD with multiprocess support.
There is also at least another PMD driver, tap, with similar
requirements for per-process device data.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Implement RTE_FLOW_ACTION_TYPE_MAC_SWAP to offload flows with
action to swap the source and destination MAC addresses in the
outermost Ethernet header.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Release notes for Aquantia atlantic driver.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
add caam jr driver details, supported features and algorithms
in the document.
release note and MAINTAINERS are also updated.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates the current AESNI-MB PMD with added AES-GCM
algorithm support. The patch includes the necessary changes
to the code including the capability update, control and data
patch changes for the AES-GCM algorithm support.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
This patch add AES-CMAC support. CMAC is a keyed hash function
that is based on a symmetric key block cipher. It is One-Key
CBC MAC improvement over XCBC-MAC. RFC 4493. NIST SP 800-38B.
Signed-off-by: Tomasz Cel <tomaszx.cel@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
We are going to introduce the solution to handle hotplug in
multi-process, it includes the below scenario:
1. Attach a device from the primary
2. Detach a device from the primary
3. Attach a device from a secondary
4. Detach a device from a secondary
In the primary-secondary process model, we assume devices are shared
by default. that means attaches or detaches a device on any process
will broadcast to all other processes through mp channel then device
information will be synchronized on all processes.
Any failure during attaching/detaching process will cause inconsistent
status between processes, so proper rollback action should be considered.
This patch covers the implementation of case 1,2.
Case 3,4 will be implemented on a separate patch.
IPC scenario for Case 1, 2:
attach a device
a) primary attach the new device if failed goto h).
b) primary send attach sync request to all secondary.
c) secondary receive request and attach the device and send a reply.
d) primary check the reply if all success goes to i).
e) primary send attach rollback sync request to all secondary.
f) secondary receive the request and detach the device and send a reply.
g) primary receive the reply and detach device as rollback action.
h) attach fail
i) attach success
detach a device
a) primary send detach sync request to all secondary
b) secondary detach the device and send reply
c) primary check the reply if all success goes to f).
d) primary send detach rollback sync request to all secondary.
e) secondary receive the request and attach back device. goto g)
f) primary detach the device if success goto g), else goto d)
g) detach fail.
h) detach success.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The mechanism can initially register the sigbus handler after the device
event monitor is enabled. When a sigbus event is captured, it will check
the failure address and accordingly handle the memory failure of the
corresponding device by invoke the hot-unplug handler. It could prevent
the application from crashing when a device is hot-unplugged.
By this patch, users could call below new added APIs to enable/disable
the device hotplug handle mechanism. Note that it just implement the
hot-unplug handler in these functions, the other handler of hotplug, such
as handler for hotplug binding, could be add in the future if need:
- rte_dev_hotplug_handle_enable
- rte_dev_hotplug_handle_disable
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This action is useful for offloading loopback mode, where the hardware
will swap source and destination MAC addresses in the outermost Ethernet
header before looping back the packet. This action can be used in
conjunction with other rewrite actions to achieve MAC layer transparent
NAT where the MAC addresses are swapped before either the source or
destination MAC address is rewritten and NAT is performed.
Must be used with a valid RTE_FLOW_ITEM_TYPE_ETH flow pattern item.
Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error should be returned by the
PMDs.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Query firmware for the new filter work request to offload flows with
actions to modify IP and TCP/UDP port addresses. When available,
translate IP and TCP/UDP port address modify actions to internal
hardware specification and offload the flow to hardware.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add actions:
- SET_TP_SRC - set a new TCP/UDP source port number.
- SET_TP_DST - set a new TCP/UDP destination port number.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add actions:
- SET_IPV4_SRC - set a new IPv4 source address.
- SET_IPV4_DST - set a new IPv4 destination address.
- SET_IPV6_SRC - set a new IPv6 source address.
- SET_IPV6_DST - set a new IPv6 destination address.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
At the moment, PCAP interfaces use dummy MAC by default. This change
adds support for selecting PCAP physical interface MAC with phy_mac=1
devarg. This allows to setup packet flows using the physical interface
MAC.
Signed-off-by: Juhamatti Kuusisaari <juhamatti.kuusisaari@coriant.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The implementation is shared by ef10 and ef10_simple datapaths.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implementation includes following limitations:
1) Packet's header length must be less than 256 (SFC_TSOH_STD_LEN);
2) Offset of the TCP header must be less than 208
(EF10_TCP_HEADER_OFFSET_LIMIT);
3) Number of Tx descriptors must be not less than number of descriptors
needed for TSO settings plus header plus one data segment.
If above conditions are not met, the packet is dropped.
If the maximum descriptor space is insufficient to hold entire TSO packet,
only a part of the packet is sent.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
No users left for this function, time to deprecate it.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
The vdpa sample application creates vhost-user sockets by using the
vDPA backend. vDPA stands for vhost Data Path Acceleration which utilizes
virtio ring compatible devices to serve virtio driver directly to enable
datapath acceleration. As vDPA driver can help to set up vhost datapath,
this application doesn't need to launch dedicated worker threads for vhost
enqueue/dequeue operations.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add enetc usage document to compile and run the
DPDK application on enetc supported platform.
This document introduces the enetc driver, supported
platforms and supported features.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When a device is added with a devargs (hotplug or whitelist),
the bus pointer can be retrieved via its devargs.
But there is no such devargs.bus in case of standard scan.
A pointer to the rte_bus handle is added to rte_device.
When a device is allocated (during a scan),
the pointer to its bus is assigned.
It will make possible to remove a rte_device,
using the function pointer from its bus.
The function rte_bus_find_by_device() becomes useless,
and may be removed later.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The function rte_devargs_remove(), which is intended to be internal,
can take a devargs structure as argument.
The matching is still using string comparison of bus name and
device name.
It is simpler and may allow a different devargs matching in future.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
rte_eal_parse_devargs_str() does not support parsing the bus name
at the start of devargs. So it was renamed and deprecated.
rte_eal_devargs_add(), rte_eal_devargs_type_count() and
rte_eal_devargs_dump() were declared deprecated and had their
implementation body renamed.
All these functions were deprecated in release 18.05.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Add API to allow creating new malloc heaps. They will be created
with socket ID's going above RTE_MAX_NUMA_NODES, to avoid clashing
with internal heaps.
This breaks the ABI, so document the change.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
We will need to refer to external heaps in some way. While we use
heap ID's internally, for external API use it has to be something
more user-friendly. So, we will be using a string to uniquely
identify a heap.
This breaks the ABI, so document the change.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
We will be assigning "invalid" socket ID's to external heap, and
malloc will now be able to verify if a supplied socket ID is in
fact a valid one, rendering parameter checks for sockets
obsolete.
This changes the semantics of what we understand by "socket ID",
so document the change in the release notes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Switch over all parts of EAL to use heap ID instead of NUMA node
ID to identify heaps. Heap ID for DPDK-internal heaps is NUMA
node's index within the detected NUMA node list. Heap ID for
external heaps will be order of their creation.
This breaks the ABI, so document the changes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When we allocate and use DPDK memory, we need to be able to
differentiate between DPDK hugepage segments and segments that
were made part of DPDK but are externally allocated. Add such
a property to memseg lists.
This breaks the ABI, so document the change in release notes.
This also breaks a few internal assumptions about memory
contiguousness, so adjust malloc code in a few places.
All current calls for memseg walk functions were adjusted to
ignore external segments where it made sense.
Mempools is a special case, because we may be asked to allocate
a mempool on a specific socket, and we need to ignore all page
sizes on other heaps or other sockets. Previously, this
assumption of knowing all page sizes was not a problem, but it
will be now, so we have to match socket ID with page size when
calculating minimum page size for a mempool.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Previously, to calculate length of memory area covered by a memseg
list, we would've needed to multiply page size by length of fbarray
backing that memseg list. This is not obvious and unnecessarily
low level, so store length in the memseg list itself.
This breaks ABI, so bump the EAL ABI version and document the
change. Also, while we're breaking ABI, pack the members a little
better.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Currently, command-line switches for legacy mem mode or single-file
segments mode are only stored in internal config. This leads to a
situation where these flags have to always match between primary
and secondary, which is bad for usability.
Fix this by storing these flags in the shared config as well, so
that secondary process can know if the primary was launched in
single-file segments or legacy mem mode.
This bumps the EAL ABI, however there's an EAL deprecation notice
already in place[1] for a different feature, so that's OK.
[1] http://patches.dpdk.org/patch/43502/
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Make the ethernet port id passed into
rte_event_eth_rx_adapter_caps_get() 16 bit.
Also, update the event rx adapter test to use 16 bit
ethernet port ids.
Fixes: c2189c907dd1 ("eventdev: make ethdev port identifiers 16-bit")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add programmer's guide doc to explain the use of the
Event Ethernet Tx Adapter library.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The DSW event device is documented in DPDK Programmer's Guide.
The MAINTAINERS file and the 18.11 release notes are updated.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The below change set suppose to bump the eventdev shared library version.
It missed updating the version number so fixing it now.
Fixes: 3810ae435783 ("eventdev: add interrupt driven queues to Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
For IA, the AVX2 vector path is only recommended to be used on later
platforms (identified by AVX512 support, like SKL etc.) This is because
performance benchmark shows downgrade when running AVX2 vector path on
early platform (BDW/HSW) in some cases. But we still observe perf gain
with some real work loading.
So this patch introduced the new devarg use-latest-supported-vec to
force the driver always selecting the latest supported vec path. Then
apps are able to take AVX2 path on early platforms. And this logic can
be re-used if we will have AVX512 vec path in future.
This patch only affects IA platforms. The selected vec path would be
like the following:
Without devarg/devarg = 0:
Machine vPMD
AVX512F AVX2
AVX2 SSE4.2
SSE4.2 SSE4.2
<SSE4.2 Not Supported
With devarg = 1
Machine vPMD
AVX512F AVX2
AVX2 AVX2
SSE4.2 SSE4.2
<SSE4.2 Not Supported
Other platforms can also apply the same logic if necessary in future.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
__rte_mbuf_raw_free and __rte_pktmbuf_prefree_seg have been deprecated for
a long time now (early 17.05), are not part of the abi and are easily
replaced with existing api.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Integrate accelerated networking support into netvsc PMD.
This allows netvsc to manage VF without using failsafe or vdev_netvsc.
For the exception vswitch path some tests like transmit
get a 22% increase in packets/sec.
For the VF path, the code is slightly shorter but has no
real change in performance.
Pro:
* using netvsc is more like other DPDK NIC's
* the exception packet uses less CPU
* much smaller code size
* no locking required on VF transmit/receive path
* no legacy Linux network device to get mangled by userspace
* much simpler (1K vs 9K) LOC
* unified extended statistics
Con:
* using netvsc has more complex startup model
* no bifurcated driver support
* no flow support (since host does not have flow API).
* no tunnel offload support
* no receive interrupt support
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Add flow operations to match packets based on destination MAC address.
Allocate and program hardware MPS table with the destination MAC
address to be matched against. The returned MPS index is then used while
offloading flows to LETCAM (maskfull) and HASH (maskless) filter regions.
Also update existing mac_addr_set() to use the new MPS table API.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add flow API operations to offload vlan push, pop, and rewrite actions.
For vlan push or rewrite actions, allocate and program an entry from
L2T table. Use the L2T index to program vlan actions for LETCAM
(maskfull) and HASH (maskless) filters.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
