Setting up the bonding options before calling rte_eth_dev_probing_finish
triggers an invalid port id error because of port state not set, or set
unused
Fixes: fbe90cdd77 ("ethdev: add probing finish function")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
Add missing NULL point check inside ixgbe_pf_host_uninit, or it may cause
segment fault when detaching a device.
Fixes: cf80ba6e20 ("net/ixgbe: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
remove queue id checks from dev_ops
ixgbe_dev_[rx/tx]_queue_[start/stop]
queue id checks already done by ethdev APIs that are calling these
dev_ops
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
remove queue id checks from dev_ops
fm10k_dev_[rx/tx]_queue_[start/stop]
queue id checks already done by ethdev APIs that are calling these
dev_ops
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
remove queue id checks from dev_ops
i40e_dev_[rx/tx]_queue_[start/stop]
i40evf_dev_[rx/tx]_queue_[start/stop]
queue id checks already done by ethdev APIs that are calling these
dev_ops
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Return value equal to zero means success and really expected.
Fixes: 0fa0070e43 ("net/sfc: support multicast addresses list controls")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This feature is used to offload stripping of VLAN header from received
packets and update vlan_tci field in mbuf when
DEV_RX_OFFLOAD_VLAN_STRIP & ETH_VLAN_STRIP_MASK flag is set.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Improve description of api used to get port name from port id or
vice-versa.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Set the rx and tx queue state appropriately when the queues or device are
started or stopped. This enables usage of the ethdev rx/tx queue start/stop
functions with the PCAP PMD.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Set the rx and tx queue state appropriately when the queues or device
are started or stopped.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Fixes: fd68b4739d ("vhost: use buffer vectors in dequeue path")
Reported-by: Yinan Wang <yinan.wang@intel.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Zhihong Wang <zhihong.wang@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
CRC_STRIP offload is always enabled, but lost here.
It is more robust to use device level offloads directly to
compose returned value.
Fixes: ff6a1197c3 ("net/sfc: convert to new Rx offload API")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Rx checksum offloads are on device level and should be checked and
enforced on device level.
Avoid logging of Rx checksum offloads enforced for each Rx queue.
Fixes: ff6a1197c3 ("net/sfc: convert to new Rx offload API")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
enic_set_mtu always reverts to the default Rx handler after changing
MTU. Try to use the simpler, non-scatter handler in this case as well.
Fixes: 35e2cb6a17 ("net/enic: add simple Rx handler")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Fallback to filter with VLAN=0 if match without VLAN is not supported
Strictly speaking it is not 100% equivalent, but good tradeoff -
untagged and priority only tagged frames will match.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now exception logic handles these cases:
When FW variant does not support filters with transport ports, but
IP protocol filters are supported, TCP/UDP protocol filters may be
used. When FW variant does not support filters with IPv4/6 addresses
or IP protocol, but filters with EtherType are supported, IPv4 and
IPv6 EtherTypes may be used
Fixes: 096dba799b ("net/sfc: avoid creation of ineffective flow rules")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
We were using LICENSE.qede_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.qede_pmd file and
directly include SPDX tags in source files.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Make a few updates in preparation for 18.08.
- Use SPDX
- Add 1400 series VIC adapters to supported models
- Describe the VXLAN port number
- Expand the description for ig-vlan-rewrite
- Add inner RSS and checksum to the features
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
There is about 3% perf drop. And it is because of a bitrate
calculation in the datapath. So improve it by maintaining an array
of port indexes in testpmd, which is updated with ethdev events.
Fixes: 8728ccf376 ("fix ethdev ports enumeration")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Avoid sq door bell write on zero packet case to reduce additional
traffic on register bus.
Fixes: 1c421f18e0 ("net/thunderx: add single and multi-segment Tx")
Cc: stable@dpdk.org
Signed-off-by: Kiran Kumar <kkokkilagadda@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add decode logic for new flash parts shipped with new Chelsio NICs
to fix initialization failure on these NICs.
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Due to the complex NVGRE_ENCAP flow action and based on the fact testpmd
does not allocate memory, this patch adds a new command in testpmd to
initialise a global structure containing the necessary information to
make the outer layer of the packet. This same global structure will
then be used by the flow command line in testpmd when the action
nvgre_encap will be parsed, at this point, the conversion into such
action becomes trivial.
This global structure is only used for the encap action.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Tested-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Due to the complex VXLAN_ENCAP flow action and based on the fact testpmd
does not allocate memory, this patch adds a new command in testpmd to
initialise a global structure containing the necessary information to
make the outer layer of the packet. This same global structure will
then be used by the flow command line in testpmd when the action
vxlan_encap will be parsed, at this point, the conversion into such
action becomes trivial.
This global structure is only used for the encap action.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Tested-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
The RTE_MAX_ETHPORT_QUEUE_STATS_MAPS does not exists, change
to the correct definition(RTE_ETHDEV_QUEUE_STAT_CNTRS)
Fixes: 5de201df89 ("ethdev: add stats per queue")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
In i40e FDIR PMD code for checking programming status
function i40e_check_fdir_programming_status(), the initial value
of return value ret should be set to -1 not 0, because if DD bit of
I40E_RX_DESC_STATUS_DD is not write back, this function will return
0 to upper function, this give an error info to upper function, the
fact for this is it is time out for DD write back and it should return
-1.
Fixes: 05999aab4c ("i40e: add or delete flow director")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When link needs to go up, I40E_AQ_PHY_AN_ENABLED is always be set in DPDK.
So all speeds are always set. This causes speed config never works.
This patch fixes this issue and only allows to set available speeds. If
link needs to go up and speed setting is not supported, it will print
warning and set default available speeds. And when link needs to go down,
link speed field should be set to non-zero to avoid link down issue when
binding back to kernel driver.
Fixes: ca7e599d45 ("net/i40e: fix link management")
Fixes: 1bb8f66116 ("net/i40e: fix link down and negotiation")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently, i40e_dev_tx_queue_setup_runtime checks simple tx and treats
mbuf fast free offloading as No-simple, which is classified as simple tx
in i40e_set_tx_function_flag. This inconsistent behavior causes tx queue
setup fail after queue was stopped. This patch fixes this bug.
Fixes: 399421100e ("net/i40e: fix missing mbuf fast free offload")
Cc: stable@dpdk.org
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
TPID can be set by set_switch_config AdminQ command on
new FW release. But find fail to set 0x88A8 on some NICs.
According to the datasheet, Switch Tag value should not
be identical to either the First Tag or Second Tag values.
So set something other than common Ethertype for internal
switching.
Fixes: 73cd7d6dc8 ("net/i40e: use set switch AQ instead of register setting")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To parse packet type correctly, profile needs to be
loaded again to update tables in SW even if profile
has exited. But previously packet type parser will
be false after loading profile when profile already
exists.
This patch fixes the issue.
Fixes: 0585f5c3d2 ("net/i40e: fix DDP profile DEL operation")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Xueqin Lin <xueqin.lin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Since PPPoL2TP profile is updated, PPPoL2TP packet type
parser will be false with the current parser function.
This patch fixes the issue.
Fixes: 11556c915a ("net/i40e: improve packet type parser")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Xueqin Lin <xueqin.lin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently, VFIO will try to map around MSI-X table in the BARs. When
MSI-X table (page-aligned) size is equal to (page-aligned) size of BAR,
VFIO will just skip the BAR.
Recent kernel versions will allow VFIO to map the entire BAR containing
MSI-X tables (*), so instead of trying to map around the MSI-X vector
or skipping the BAR entirely if it's not possible, we can now try
mapping the entire BAR first. If mapping the entire BAR doesn't
succeed, fall back to the old behavior of mapping around MSI-X table or
skipping the BAR.
(*): "vfio-pci: Allow mapping MSIX BAR",
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?id=a32295c612c57990d17fb0f41e7134394b2f35f6
Fixes: 90a1633b23 ("eal/linux: allow to map BARs with MSI-X tables")
Signed-off-by: Takeshi Yoshimura <t.yoshimura8869@gmail.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
A few regressions with virtio/vhost have been discovered, due to the
strong dependency of virtio/vhost on the underlying memory layout.
Specifically, virtio/vhost share all memory pages starting from the
beginning of the segment, while the patch below made it so that the
memory is always allocated from the top of VA space, not from the
bottom.
Fixes: 179f916e88 ("mem: allocate in reverse to reduce fragmentation")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Compressdev tests depend on Zlib library,
so they can only be enabled if this is available.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
NFP PMD does not have any external dependency.
It only requires Linux OS, so it is not needed
to be enabled in the test-build script.
Fixes: 80987c40fd ("config: enable nfp driver on Linux")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
When building with meson on e.g. cygwin, the error message about an
unsupported platform referenced an unknown variable since
"host_machine" was missing an "_".
Fixes: 844514c735 ("eal: build with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When building DPDK with meson with the <builddir> being outside the source
directory, an error was generated as the path to the EAL headers was not
found. The path specified for the includes backed out unnecessarily far and
so broke when the build directory was not in the expected location of
just inside the source dir. Changing the path to be shorter, just going
down one level and then into EAL builds for both cases - where builddir is
in source directory, and also when it's outside it.
Fixes: 092ee51649 ("kvargs: build before EAL")
Reported-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
There is no need to check for each library, driver and example whether
certain cflags are supported. Instead of checking inside the loop, do
so outside and reuse the value.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When building a driver or library and a required internal dependency
is missing, the error message printed was:
Tried to get unknown variable "shared_rte_<libname>".
However, a better way to handle this is to catch the missing variable
earlier and convert it into a proper message, informing the user
that the required dependency is missing, and most importantly, what
library or driver wanted that dependency.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
A number of drivers have dependencies on libraries which
are only built on Linux, and so they need to be disabled
on FreeBSD. Rather than basing the disabling on OS, in
each case we base the building of the library on the
presence of the required dependency.
Fixes: 50385c1060 ("net/ifc: add to meson build")
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Fixes: 5936aa3a39 ("net/vhost: add to meson build")
Fixes: 3298fa4853 ("raw/dpaa2_cmdif: introduce DPAA2 command interface driver")
Fixes: b1ee472fed ("raw/dpaa2_qdma: introduce the DPAA2 QDMA driver")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add Octeontx ZIP PMD feature specification and user guide
with build and run instructions.
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Octentx zipvf PMD provides hardware acceleration for
deflate and lzs compression and decompression operations
using Octeontx zip co-processor, which provide 8
virtualized zip devices.
This patch add basic initialization routine to register zip VFs
to compressdev library.
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
For outbound ports BYPASS rule is erroneously treated as PROTECT one
with SA idx zero.
Fixes: 2a5106af13 ("examples/ipsec-secgw: fix corner case for SPI value")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
