This start a series to re-work the flow engine in mlx5 to easily support
flow conversion to Verbs or TC. This is necessary to handle both regular
flows and representors flows.
As the full file needs to be clean-up to re-write all items/actions
processing, this patch starts to disable the regular code and only let the
PMD to start in isolated mode.
After this patch flow API will not be usable.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Prior to this patch, all port representors detected on a given device were
probed and Ethernet devices instantiated for each of them.
This patch adds support for the standard "representor" parameter, which
implies that port representors are not probed by default anymore, except
for the list provided through device arguments.
(Patch based on prior work from Yuanhan Liu)
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
Port representors are probed in whatever unspecified order
ibv_get_device_list() returns them.
This is counterintuitive to users since DPDK port IDs assignment almost
never follows the same sequence as representor IDs. Additionally, the
master device does not necessarily inherit the lowest DPDK port ID.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Probe existing port representors in addition to their master device and
associate them automatically.
To avoid collision between Ethernet devices, they are named as follows:
- "{DBDF}" for master/switch devices.
- "{DBDF}_representor_{rep}" with "rep" starting from 0 for port
representors.
(Patch based on prior work from Yuanhan Liu)
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
The current PCI probing method is not aware of Verbs port representors,
which appear as standard Verbs devices bound to the same PCI address and
cannot be distinguished.
Problem is that more often than not, the wrong Verbs device is used,
resulting in unexpected traffic.
This patch makes the driver discard representors to only use the master
device. If unable to identify it (e.g. kernel drivers not recent enough),
either:
- There is only one matching device which isn't identified as a
representor, in that case use it.
- Otherwise log an error and do not probe the device.
(Patch based on prior work from Yuanhan Liu)
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
Since commit "net/mlx5: drop useless support for several Verbs ports"
removed an inner loop, mlx5_dev_spawn() is left with an unnecessary indent
level.
This patch eliminates a block, moves its local variables to function scope,
and re-indents its contents (diff best viewed with --ignore-all-space).
No functional impact.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
All the generic probing code needs is an IB device. While this device is
currently supplied by a PCI lookup, other methods will be added soon.
This patch divides the original function, which has become huge over time,
as follows:
1. PCI-specific (mlx5_pci_probe()).
2. Verbs device (mlx5_dev_spawn()).
(Patch based on prior work from Yuanhan Liu)
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
Unlike mlx4 from which this capability was inherited, mlx5 devices expose
exactly one Verbs port per PCI bus address. Each physical port gets
assigned its own bus address with a single Verbs port.
While harmless, this code requires an extra loop that would get in the way
of subsequent refactoring.
No functional impact.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch gets rid of redundant calls to open the device and query its
attributes in order to simplify the code.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
There are several attribute objects in this function:
- IB device attributes (struct ibv_device_attr_ex device_attr).
- Direct Verbs attributes (struct mlx5dv_context attrs_out).
- Port attributes (struct ibv_port_attr).
- IB device attributes again (struct ibv_device_attr_ex device_attr_ex).
"attrs_out" is both odd and initialized using a nonstandard syntax. Rename
it "dv_attr" for consistency.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
HW needs each pool to be mapped to an aura set of 16 auras.
Previously, pool to aura mapping was considered to be 1:1.
Fixes: 02fd6c7443 ("mempool/octeontx: support allocation")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add cli commands to enable and disable pipelines on specific threads in
softnic.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Implements softnic API function to run pipeline objects.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add thread data structure and init function to run softnic pipelines
objects.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add tap object implementation to the softnic.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add link object implementation to the softnic.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Rework the softnic implementation to have flexiblity in enabling
more features to its receive and transmit data path.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
In case DPAA FMAN configuration tool (FMC) is not available,
the system can still work with default queue(1 queue per port).
This patch also fixes some logs related to FQ ids, which were
idetified while testing this support.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add support for configurable vdqcr exact flag.
This boost the performance, however this can give
side effects for some extra packet fetch. Which has been
taken care in the patch as well.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Avoid array of fq as packets are dq only from a single q.
Signed-off-by: Sunil Kumar Kori <sunil.kori@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch fixes prefetch rx routine to
set the next prefetch request to the size of nb_pkts.
It assumes that next request would ideally be
of same size.
Fixes: 4bc5ab88db ("net/dpaa2: fix Tx only mode")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The buffer offset was incorrectly being set at 64,
thus not honoring the packet headroom.
Fixes: 6d6b4f49a1 ("bus/dpaa: add FMAN hardware operations")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Otherwise the SVR may not be available for dpaa init.
Fixes: 3b59b73dea ("bus/dpaa: update platform SoC value register routines")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The configuration value indicating that KNI was build was incorrect,
causing the driver to never be built.
Fixes: 3479586fe6 ("net/kni: add to meson build")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When compiling with meson, extra warnings are enabled about casting from
integers to different size pointers. This triggers an error in AVP as the
addition of the offset to the pointer address causes the result to be a
64-bit integer which doesn't fit a 32-bit pointer. The fix here is to
explicitly indicate that the offset is of type "uintptr_t" which prevents
any promotion which would cause errors.
Fixes: c0ad584222 ("net/avp: add device initialization")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The sfc driver is not supported on 32-bit so disable in meson in
those cases.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This commit also adds a flush callback test to the sw eventdev's selftest
suite.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
When event queues are being flushed the getwork operation used to extract
events should be a grouped getwork operation to the specific event queue.
Fixes: 8384f0e039 ("event/octeontx: support device stop flush callback")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The following error hits if host cc compiler is clang(default one in most
linux distributions) and the cross compiler is gcc.
The root cause is: the hybride compilers add the warning options to the
meson project as project arguments, which apply for both host compiling and
cross compiling. But some options such as '-Wno-format-truncation' are not
supported nor recognized by clang, so they have to be removed from the
project arguments for the host compiler to run smoothily and added back as
cflags for the cross compiler to compile for cross source files.
The fix is remove unrecognized warning options from the meson project
arguments shared by gcc and clang, as add them specifically for gcc or
clang as cflags.
[265/893] Compiling C object
'buildtools/pmdinfogen/pmdinfogen@exe/pmdinfogen.c.o'. warning: unknown
warning option '-Wno-format-truncation' [-Wunknown-warning-option]
Fixes: a55277a788 ("devtools: add test script for meson builds")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Song Zhu <song.zhu@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Minimum head/tailroom requirement for each PMD has to be considered
while populating the dev_info.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The PMD specific API to configure, clear and
obtain session private size is renamed, including
the word _sym_ to clarify that it is API
for symmetric sessions, so there will not be any
conflicts for asymmetric and other type of sessions
in the future.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
As announced in the previous release,
The API to attach/dettach a session to a queue pair
is removed, as it was only used in DPAA, and it is not
actually needed.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The current mbuf scatter gatter feature flag is
too ambiguous, as it is not clear if input and/or output
buffers can be scatter gather mbufs or not, plus
if in-place and/or out-of-place is supported.
Therefore, five new flags will replace this flag:
- RTE_CRYPTODEV_FF_IN_PLACE_SGL
- RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT
- RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT
- RTE_CRYPTODEV_FF_OOP_LB_IN_SGL_OUT
- RTE_CRYPTODEV_FF_OOP_LB_IN_LB_OUT
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Removed cryptodev queue start/stop functions,
as they were marked deprecated in 18.05, since they
were not implemented by any driver.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Most crypto PMDs do not have a limitation
of the number of the sessions that can be handled
internally. The value that was set before was not
actually used at all, since the sessions are created
at the application level.
Therefore, this value is not parsed from the initial
crypto parameters anymore and it is set to 0,
meaning that there is no actual limit.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The maximum number of sessions device argument will be removed,
as most PMDs do not have a limitation on this number.
Therefore, the MVSAM PMD needs to parse this value internally.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
The cryptodev info structure currently contains
the maximum number of sessions that can be used in a queue pair.
This is only set in DPAA_SEC PMD, and since it is calculated
based on the maximum number of sessions (which is not used
anymore), this field can be removed.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Structure rte_cryptodev_info has currently PCI device
information ("struct rte_pci_device") in it.
This information is not generic to all devices,
so this gets replaced with the generic "rte_device" structure,
compatible with all crypto devices.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Added Huffman fixed and dynamic encoding feature flags,
so an application can query if a device supports
these two types, when performing DEFLATE compression.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Registered new dynamic logtype for driver and
replaced SNOW3G_LOG_ERR and CDEV_LOG_ERR
with the new SNOW3G_LOG macro, which uses the new logtype.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
The physical address of IV required by Virtio was computed using
crypto operations' physical address plus the offset. However not
all crypto ops will have physical address field initialized and
compute it runtimely is costly. This patch fixes this problem by
adding iv field in virtio_crypto_op_cookie and does a memcpy of
iv instead.
Fixes: 82adb12a1f ("crypto/virtio: support burst enqueue/dequeue")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Jay Zhou <jianjay.zhou@huawei.com>
Registered new dynamic logtype for driver and
replaced GCM_LOG_ERR and CDEV_LOG_ERR
with the new AESNI_GCM_LOG macro, which uses the new logtype.
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced ZUC_LOG_ERR and CDEV_LOG_ERR
with the new ZUC_LOG macro, which uses the new logtype.
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced KASUMI_LOG_ERR and CDEV_LOG_ERR
with the new KASUMI_LOG macro, which uses the new logtype.
Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced MB_LOG_ERR and CDEV_LOG_ERR
with the new AESNI_MB_LOG macro, which uses the new logtype.
Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced NULL_CRYPTO_LOG_ERR and CDEV_LOG_ERR
with the new NULL_LOG macro, which uses the new logtype.
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced OPENSSL_LOG_ERR and CDEV_LOG_ERR macros with
new OPENSSL_LOG macro, which uses the new logtype.
Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced CS_LOG_ERR and RTE_LOG macros with
new CR_SCHED macro, which uses the new logtype.
Signed-off-by: Hari Kumar <hari.kumarx.vemula@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
- moved common qat files to common/qat dir.
- changed common/qat/Makefile, common/qat/meson.build,
drivers/Makefile, crypto/Makefile
to add possibility of using new files locations
- added README file into crypto/qat to clarify where
the build is made from
- updated MAINTAINERS file
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch groups sources and related dependencies into
common and sym sections in build files.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds following weak functions to facilitate conditional
compilation of code for those services:
- qat_sym_dev_create
- qat_asym_dev_create
- qat_comp_dev_create
- qat_sym_dev_destroy
- qat_asym_dev_destroy
- qat_comp_dev_destroy
and removes unused files with empty definitions of above functions.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
When the bond PMD is stopped, the active slave count is reset.
For 802.3ad mode this potentially leaks memory and clears state since
a second sequential activate_slave() will occur when the bond PMD is
restarted and the LSC callback is triggered while the active slave
count is 0. To fix this, don't clear the active slave count when
stopping. Only deactivate_slave() should be used to clear the slaves.
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Set the Rx channel map and ingress queue type properly to allow firmware
to manage the internal mapping correctly.
Fixes: 6c2809628c ("net/cxgbe: improve latency for slow traffic")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Query firmware for max Tx and Rx queues that can be allocated.
Move the code to determine max queues to common place for both
PF and VF.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Enable RSS on IPv4 fragmented packets and IPv6 packets with extension
headers based on 2-tuple hash.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add ops to set link up and down for both PF and VF. If wait_to_complete
is set, poll for link update for up to 10 seconds max.
Original work by Surendra Mobiya <surendra@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add action to redirect matched packets to specified egress physical
port without sending them to host.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support to match packets based on ingress physical port.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add interface to enable hit counters for flows offloaded in HASH
region.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add interface to delete offloaded flows in HASH region. Use the
hash index saved during insertion to delete the corresponding flow.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add interface to offload flows to HASH region. Translate internal
filter specification to requests to offload flows to HASH region.
Save the returned hash index of the offloaded flow for deletion later.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
CLIP region holds destination IPv6 addresses to be matched for
corresponding flows. Query firmware for CLIP resources and allocate
table to manage them. Also update LE-TCAM to use CLIP to reduce
number of slots needed to offload IPv6 flows.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Fetch supported match items in HASH region. Ensure the mask
is all set for all the supported match items to be offloaded
to HASH region. Otherwise, offload them to LE-TCAM region.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Fetch available HASH filter resources and allocate table for managing
them. Currently only supported on Chelsio T6 family of NICs.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
The macro FM10K_SIMPLE_TX_FLAG was used with old Tx queue flags.
It is no longer used and was forgotten when cleaning old Tx flags.
Fixes: 1778ef67e2 ("net/fm10k: remove dependence on Tx queue flags")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace the BSD license header with the SPDX tag.
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Implement EF10 ESSB Rx datapath callback to get number of pending
descriptors.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Number of buffers left in completed descriptor may be 0. If so,
all buffers of the descriptor are freed once again.
Fixes: 390f9b8d82 ("net/sfc: support equal stride super-buffer Rx mode")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Support rx of in direction packets only
Useful for apps that also tx to eth_pcap ports in order to not see them
echoed back in as rx when out direction is also captured
Example:
In case using rx_iface and sending *single* packet to eth1
it will loop forever as the when it is sent to tx_iface=eth1
it will be captured again on the rx_iface=eth1 and so on
$RTE_TARGET/app/testpmd l 0-3 -n 4 \
--vdev 'net_pcap0,rx_iface=eth1,tx_iface=eth1'
…
---------------------- Forward statistics for port 0 ------------
RX-packets: 758 RX-dropped: 0 RX-total: 758
TX-packets: 758 TX-dropped: 0 TX-total: 758
------------------------------------------------------------------
While if using rx_iface_in it will not be captured on the way out and
be forwarded only once
$RTE_TARGET/app/testpmd l 0-3 -n 4 \
--vdev 'net_pcap0,rx_iface_in=eth1,tx_iface=eth1'
…
---------------------- Forward statistics for port 0 ------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
------------------------------------------------------------------
Signed-off-by: Ido Goshen <ido@cgstowernetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
TCI may contain PCP or DEI bits. Matching of these bits is not
supported, but the bits still may be set in specification value and
not covered by mask. So, these bits should be ignored.
Fixes: 894080975e ("net/sfc: support VLAN in flow API filters")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Instead of checking the multiple Virtio features bits for
every packet, let's do the check once at configure time and
store it in virtio_hw struct.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
This patch improves the Tx offload features selection depending
on whether the application request for offloads.
When the application doesn't request for Tx offload features,
the corresponding features bits aren't negotiated.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The simple Tx path does not comply with the Virtio specification.
Now that VIRTIO_F_IN_ORDER feature is supported by the Virtio PMD,
let's use this optimized path instead.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Starting from rdma-core v19, Mellanox OFED 4.4, the Verbs resources
cleanup is properly activated in plug-out process when setting the
MLX5_DEVICE_FATAL_CLEANUP environment variable to 1.
Set the aforementioned variable to 1.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
In the default Rx handler stop processing packets at the end of
the completion ring so that wrapping doesn't have to be checked
in the inner while loop.
Also, check the color bit in the completion without using a conditional.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
The default tx handler checks the maximum packet size. Check it in the
prepare handler too. WQ stops working if the app/driver tries to send
oversized packets, so these checks are unavoidable.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Add a much-simplified handler that works when all offloads are
disabled, except mbuf fast free. When compared against the default
handler, under ideal conditions, cycles per packet drop by 60+%.
The driver tries to use the simple handler first.
The idea of using specialized/simplified handlers is from the Intel
and Mellanox drivers.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Request one completion update per roughly 32 buffers. It saves DMA
resources on the NIC, PCIe utilization, and cache miss rates.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
WQ is currently using vnic_wq_buf to store mbuf pointers for Tx
packets. But, it contains an unused mempool pointer and mbuf is
unnecessarily cast to void pointer. Remove vnic_wq_buf entirely and
use an mbuf pointer array instead.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The NIC has one configurable VXLAN port, which is set to the default
4789 upon vNIC reset. Adding a non-default port replaces this single
VXLAN port. Deleting the previously added non-default port restores
the VXLAN port to the hardware default.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Add a new devarg "ig-vlan-rewrite" to allow the user to set
non-default rewrite mode. The UCS VIC may add/remove/modify the VLAN
header of an ingress packet depending on the ingress VLAN rewrite
mode.
By default, the driver sets the pass-through mode, which tells the NIC
"do not touch VLAN header and preserve it as is". This mode is usually
sufficient, but can complicate deployments for certain environments.
For example, OVS-DPDK in UCS blade environments may want to use "untag
default VLAN mode", which removes the VLAN header from an ingress
packet if it matches vNIC's default VLAN.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Report min/max ring sizes, alignments, and so on, and rely on the
common checks implemented in the rte_ethdev layer.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The fetch index must be initialized only when RQ is
disabled. Otherwise, it may lead to stale entries in IG descriptor
cache on the VIC.
Fixes: a74629cfa3 ("net/enic: enable RQ first and then post Rx buffers")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Currently, enic_alloc_wq (via rte_eth_tx_queue_setup) may overwrite
the admin limit with a lower value. This is wrong as seen in the
following sequence.
1. UCS admin-set Tx queue limit (config.wq_desc_count) = 4096
2. Set up tx queue with 512 descriptors
The admin limit (config.wq_desc_count) becomes 512.
3. Stop ports and now set up Tx queue with 1024 descriptors.
This fails because 1024 is greater than the admin limit (512).
Do not modify the admin limit, and when queried, report the current
number of descriptors instead of the admin limit. The rx queue setup
(enic_alloc_rq) does not this problem.
Fixes: fefed3d1e6 ("enic: new driver")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The UDP RSS interface has changed in the release firmware for 100G VIC
adapters. The capability bit is now in NIC_CFG. Also the driver is
supposed to use CMD_NIC_CFG_CHK and check if RSS config is
successful. No more changes are expected with respect to UDP RSS API.
Fixes: 94c3518958 ("net/enic: update UDP RSS controls")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Fix missing or incorrect packet types discovered by DTS.
- Non-IP inner packets
Set the tunnel flag.
- Inner Ethernet packets
All supported tunnel packets have Ethernet as inner packets. So, set
INNER_L2_ETHER for all tunnel types.
- IPv4 fragments carrying TCP/UDP
The NIC indicates TCP/UDP based on the protocol in IP header. For
fragments, ignore that bit and always set L4_FRAG.
- IPv6 fragments
The NIC does regconize fragments (IPv6 packets with fragment extension
headers). Set packet types for these.
Fixes: 93fb21fdbe ("net/enic: enable overlay offload for VXLAN and GENEVE")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
This commit refines the Rx Packet type flags reported by the PMD
for each packet being received in order to make the report more
accurate.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
rte_eth_rx_descritpr_status and rte_eth_tx_descriptor_status
are supported by fm10K.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For i40evf, internal rx interrupt and adminq interrupt share the same
source, that cause a lot cpu cycles be wasted on interrupt handler
on rx path. This is complained by customers which require low latency
(when set I40E_ITR_INTERVAL to small value), but have to be sufferred by
tremendous interrupts handling that eat significant CPU resources.
The patch disable pci interrupt and remove the interrupt handler,
replace it with a low frequency (50ms) interrupt polling daemon
which is implemented by registering a alarm callback periodly, this
save CPU time significently: On a typical x86 server with 2.1GHz CPU,
with low latency configure (32us) we saw CPU usage from top commmand
reduced from 20% to 0% on management core in testpmd).
Also with the new method we can remove compile option: I40E_ITR_INTERVAL
which is used to balance between low latency and low CPU usage previously.
Now we don't need it since we can reach both at same time.
Suggested-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
After IN_ORDER Rx/Tx paths added, need to update Rx/Tx path selection
logic.
Rx path select logic: If IN_ORDER and merge-able are enabled will select
IN_ORDER Rx path. If IN_ORDER is enabled, Rx offload and merge-able are
disabled will select simple Rx path. Otherwise will select normal Rx
path.
Tx path select logic: If IN_ORDER is enabled will select IN_ORDER Tx
path. Otherwise will select default Tx path.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
IN_ORDER Rx function depends on merge-able feature. Descriptors
allocation and free will be done in bulk.
Virtio dequeue logic:
dequeue_burst_rx(burst mbufs)
for (each mbuf b) {
if (b need merge) {
merge remained mbufs
add merged mbuf to return mbufs list
} else {
add mbuf to return mbufs list
}
}
if (last mbuf c need merge) {
dequeue_burst_rx(required mbufs)
merge last mbuf c
}
refill_avail_ring_bulk()
update_avail_ring()
return mbufs list
IN_ORDER Tx function can support offloading features. Packets which
matched "can_push" option will be handled by simple xmit function. Those
packets can't match "can_push" will be handled by original xmit function
with in-order flag.
Virtio enqueue logic:
xmit_cleanup(used descs)
for (each xmit mbuf b) {
if (b can inorder xmit) {
add mbuf b to inorder burst list
continue
} else {
xmit inorder burst list
xmit mbuf b by original function
}
}
if (inorder burst list not empty) {
xmit inorder burst list
}
update_avail_ring()
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
IN_ORDER virtio-user Tx function support Tx checksum offloading and
TSO which also support on normal Tx function. So extracts common part
into separated function for reuse.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add new function for freeing IN_ORDER descriptors. As descriptors will
be allocated and freed sequentially when IN_ORDER feature was
negotiated. There will be no need to utilize chain for freed descriptors
management, only index update is enough.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add parameters for configuring VIRTIO_NET_F_MRG_RXBUF and
VIRTIO_F_IN_ORDER feature bits. If feature is disabled, also update
corresponding unsupported feature bit.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch introduces unsupported features mask for virtio-user device.
For virtio-user server mode, when reconnecting virtio-user will retrieve
vhost device features as base and then unmask unsupported features.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If VIRTIO_F_IN_ORDER has been negotiated, driver will use descriptors in
ring order: starting from offset 0 in the table, and wrapping around at
the end of the table. Also introduce use_inorder_[rt]x flag for
selection of IN_ORDER [RT]x handlers.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Setting of VLAN filter cmd was being done with incorrect flag value.
We need to use inner vlan fields instead of outer vlan.
Fixes: 7fe5668d2e ("net/bnxt: support VLAN filter and strip")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fixed size of fw_grp_ids in VNIC is limiting the number of Rx rings
being created. With this patch we are allocating fw_grp_ids dynamically,
allowing us to get over this artificial limit.
Fixes: 9738793f28 ("net/bnxt: add VNIC functions and structs")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If HWRM resource manager is enabled, check VF resources before proceeding.
Make sure there are enough resources allocated and return an error in case
of insufficient error.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While moving a flow to a different destination queue,
the l2_filter_id being passed to the FW command was incorrect.
Fix it by re-using the matching filter's l2_filter_id since
that is supposed to be the same in this case.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
rte_mbuf_data_iova returns a 64-bit address. But we are incorrectly
using only 32-bits of that. Use rte_cpu_to_le_64 instead of
rte_cpu_to_le_32
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is no need to update bnxt_hwrm_vnic_plcmode_cfg if new MTU is
not greater than the max data the mbuf can accommodate.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In bnxt_free_filter_mem(), check the filter type and call the
appropriate HWRM command to clear the filter from HW.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The L2 filter id is needed in many scenarios particularly when
we are repurposing the same ntuple filter with different destination
queues. This patch reverts a commit in which the L2 filter id was being
reset in clear_ntuple_filter().
Fixes: 1383434c90 ("net/bnxt: reset L2 filter id once filter is freed")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
When using multi-mbuf to xmit large packets, we need to use total
packet lengths (sum of all segments) to set txbd->flags_type.
Packets will not be sent when using tx_pkt->data_len(The first
segment of packets).
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Xiaoxin Peng <xiaoxin.peng@broadcom.com>
Reviewed-by: Herry Chen <herry.chen@broadcom.com>
Reviewed-by: Jason He <jason.he@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
update HWRM API to v1.9.2.9
Signed-off-by: Rob Miller <rob.miller@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Passing an invalid fw_vnic_id to the firmware will cause the
bnxt_hwrm_vnic_plcmode_cfg command to fail.
Add a check for VNIC id before sending message to firmware.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In preparation of more rte_flow support it has been decided to
separate out filter and flow into their own files. Functionally the
same.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Move check_zero_bytes into new bnxt_util.h file.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Packets destined to the to-be-stopped queue should not be dropped
(neither in HW nor in the driver), so re-program the RSS Table without
this queue on stop and add it back to the table on start unless it
is a Representor VF.
Since 0th entry is used for default ring, use fw_grp_id + 1 to change
the RSS table population logic by programming valid IDs instead of the
default zeroth entry in case of an invalid fw_grp_id.
Destroy and recreate the trio of Rx rings(compl, Rx, AG) every time in
start so that HW is in sync with software.
Fixes: 9b63c6fd70 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
