Update the software dependency link because of website shutdown.
Netcope Technologies was recently renamed to Magmio and no longer
provides packages and support for the FPGA cards and NDK platform.
However the project Liberouter@CESNET continues with the maintenance
of Network Development Kit and cooperates on the development of high
speed network FPGA cards as well.
Signed-off-by: Martin Spinler <spinler@cesnet.cz>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Users are confused with a feature with "P", added necessary
explanation for this.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
These edits affect the outermost header in the current processing state
of the packet, which might have been decapsulated by prior action DECAP.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Currently the vector and simple xmit algorithm don't support multi_segs,
so if Tx offload support MBUF_FAST_FREE, driver could invoke
rte_mempool_put_bulk() to free Tx mbufs in this situation.
In the testpmd single core MAC forwarding scenario, the performance is
improved by 8% at 64B on Kunpeng920 platform.
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Remove the szedata2 device driver as the platform is no longer
supported.
Signed-off-by: Martin Spinler <spinler@cesnet.cz>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The ConnectX NIC series hardware provides only 63-bit
wide timestamps. The imposed limitations description
added to documentation.
At the moment there are no affected applications known
or bug reports neither, this is just the declaration
of limitation.
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
These actions map to MAE action DECR_IP_TTL. It affects
the outermost header in the current processing state of
the packet, which might have been decapsulated by prior
action DECAP. It also updates IPv4 checksum accordingly.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The delay drop is the common feature managed on per device basis
and the kernel driver is responsible one for the initialization and
rearming.
By default, the timeout value is set to activate the delay drop when
the driver is loaded.
A private flag "dropless_rq" is used to control the rearming. Only
when it is on, the rearming will be handled once received a timeout
event. Or else, the delay drop will be deactivated after the first
timeout occurs and all the Rx queues won't have this feature.
The PMD is trying to query this flag and warn the application when
some queues are created with delay drop but the flag is off.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
For the Ethernet RQs, if there all receiving descriptors are
exhausted, the packets being received will be dropped. This behavior
prevents slow or malicious software entities at the host from
affecting the network. While for hairpin cases, even if there is no
software involved during the packet forwarding from Rx to Tx side,
some hiccup in the hardware or back pressure from Tx side may still
cause the descriptors to be exhausted. In certain scenarios it may be
preferred to configure the device to avoid such packet drops,
assuming the posting of descriptors will resume shortly.
To support this, a new devarg "delay_drop" is introduced. By default,
the delay drop is enabled for hairpin Rx queues and disabled for
standard Rx queues. This value is used as a bit mask:
- bit 0: enablement of standard Rx queue
- bit 1: enablement of hairpin Rx queue
And this attribute will be applied to all Rx queues of a device.
The "rq_delay_drop" capability in the HCA_CAP is checked before
creating any queue. If the hardware capabilities do not support
this delay drop, all the Rx queues will still be created without
this attribute, and the devarg setting will be ignored even if it
is specified explicitly. A warning log is used to notify the
application when this occurs.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Set the 'present' parameter to 0 by default. It is configured by hardware,
users can set it to 1 for manual configuration.
Fixes: f611dada1af8 ("net/txgbe: update link setup process of backplane NICs")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
This patch introduces shared RxQ. All shared Rx queues with same group
and queue ID share the same rxq_ctrl. Rxq_ctrl and rxq_data are shared,
all queues from different member port share same WQ and CQ, essentially
one Rx WQ, mbufs are filled into this singleton WQ.
Shared rxq_data is set into device Rx queues of all member ports as
RxQ object, used for receiving packets. Polling queue of any member
ports returns packets of any member, mbuf->port is used to identify
source port.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Flex item or flex parser is port infrastructure that allows
application to add support for a custom network header and
offload flows to match the header elements.
Flex item API adds FLEX flow item to RTE flows.
Fixes: dc4d860e8a89 ("ethdev: introduce configurable flexible item")
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The GTP, GTP-U, GTP-C header fields can be matched, however NIC does not
support GTP tunneling so no items after the GTP header can be specified.
If a GTP-U or GTP-C item is specified without a preceding UDP item, the
UDP destination port is implicitly matched. For GTP, the destination UDP
port must be specified but its value is not enforced.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Protocol agnostic flow offloading in Flow Director is enabled by this
patch based on the Parser Library, using existing rte_flow raw API.
Note that the raw flow requires:
1. byte string of raw target packet bits.
2. byte string of mask of target packet.
Here is an example:
FDIR matching ipv4 dst addr with 1.2.3.4 and redirect to queue 3:
flow create 0 ingress pattern raw \
pattern spec \
00000000000000000000000008004500001400004000401000000000000001020304 \
pattern mask \
000000000000000000000000000000000000000000000000000000000000ffffffff \
/ end actions queue index 3 / mark id 3 / end
Note that mask of some key bits (e.g., 0x0800 to indicate ipv4 proto)
is optional in our cases. To avoid redundancy, we just omit the mask
of 0x0800 (with 0xFFFF) in the mask byte string example. The prefix
'0x' for the spec and mask byte (hex) strings are also omitted here.
Also update the ice feature list with rte_flow item raw.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT.
The former should be used instead of ambiguous PORT_ID.
The latter sends traffic to the entity represented by
the given ethdev (network port or VF).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for item REPRESENTED_PORT to match on traffic entering
the embedded switch from the entity represented by the given
ethdev (network port or VF).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
A meter policy with RSS/Queue action is not supported
when dv_xmeta_en enabled.
When dv_xmeta_en enabled in legacy creating flow,
it will split into two flows
(one set_tag with jump flow and one RSS/queue action flow).
For meter policy as termination table,
it cannot split flow and
cannot support when dv_xmeta_en enabled.
Fixes: 51ec04dc7bcf ("net/mlx5: connect meter policy to created flows")
Cc: stable@dpdk.org
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add MAC addresses to filter incoming packets, support to set
multicast addresses to filter. And support to set unicast table array.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Provide the capability to update the hash key, hash types
and RETA table on the fly (without needing to stop/start
the device). However, the key length and the number of RETA
entries are fixed to 40B and 128 entries respectively. This
is done in order to simplify the design, but may be
revisited later as the Virtio spec provides this
flexibility.
Note that only VIRTIO_NET_F_RSS support is implemented,
VIRTIO_NET_F_HASH_REPORT, which would enable reporting the
packet RSS hash calculated by the device into mbuf.rss, is
not yet supported.
Regarding the default RSS configuration, it has been
chosen to use the default Intel ixgbe key as default key,
and default RETA is a simple modulo between the hash and
the number of Rx queues.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
host-based-truflow devarg is not used anymore to enable host based
flow table management functionality TruFlow. Instead this feature is
now driven by a capability indicated by the firmware.
TruFlow is not in tech preview anymore. Update the doc accordingly.
Fixes: da3731e2ea00 ("net/bnxt: check FW capability to support TRUFLOW")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Support for runtime Rx/Tx queue setup and inner RSS is not updated.
Update feature matrix for bnxt PMD.
Fixes: 7ed45b1a7c0f ("net/bnxt: support RSS hash selection")
Fixes: 0105ea1296c9 ("net/bnxt: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for inline crypto for IPsec, for ESP transport and
tunnel over IPv4 and IPv6, as well as supporting the offload for
ESP over UDP, and in conjunction with TSO for UDP and TCP flows.
Implement support for rte_security packet metadata
Add definition for IPsec descriptors, extend support for offload
in data and context descriptor to support
Add support to virtual channel mailbox for IPsec Crypto request
operations. IPsec Crypto requests receive an initial acknowledgment
from physical function driver of receipt of request and then an
asynchronous response with success/failure of request including any
response data.
Add enhanced descriptor debugging
Refactor of scalar tx burst function to support integration of offload
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
In socket direct mode, it's possible to bind any two (maybe four
in future) PCIe devices with IDs like xxxx:xx:xx.x and
yyyy:yy:yy.y. Bonding member interfaces are unnecessary to have
the same PCIe domain/bus/device ID anymore,
Kernel driver uses "system_image_guid" to identify if devices can
be bound together or not. Sysfs "phys_switch_id" is used to get
"system_image_guid" of each network interface.
OFED 5.4+ is required to support "phys_switch_id".
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
