Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane callback.
To align with other eth device queue configuration callbacks:
- queue release callbacks are changed to use queue ID
- all drivers are adapted
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Definition of `rte_ether_addr` structure used a workaround allowing DPDK
and Windows SDK headers to be used in the same file, because Windows SDK
defines `s_addr` as a macro. Rename `s_addr` to `src_addr` and `d_addr`
to `dst_addr` to avoid the conflict and remove the workaround.
Deprecation notice:
https://mails.dpdk.org/archives/dev/2021-July/215270.html
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Introduce an internal firmware loading helper to remove code duplication
in our drivers and handle xz compressed firmware by calling libarchive.
This helper tries to look for .xz suffixes so that drivers are not aware
the firmware has been compressed.
libarchive is set as an optional dependency: without libarchive, a
runtime warning is emitted so that users know there is a compressed
firmware.
Windows implementation is left as an empty stub.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Tested-by: Haiyue Wang <haiyue.wang@intel.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
These headers are used but not included explicitly, including them.
"arpa/inet.h" is included for 'htons' and friends.
"netinet/in.h" is included for 'IPPROTO_IP'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
The page size is often retrieved from the macro PAGE_SIZE.
If PAGE_SIZE is not defined, it is either using hard coded default,
or getting the system value from the UNIX-only function sysconf().
Such definitions are replaced with the generic function
rte_mem_page_size() defined for each supported OS.
Removing PAGE_SIZE definitions will fix dlb drivers for musl libc,
because #ifdef checks were missing, causing redefinition errors.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Boyer <aboyer@pensando.io>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Replace copies of size(arr)/size(arr[0]) with RTE_DIM().
Eventually all of these macro definitions should be removed.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
Meson can use cmake as a fallback for detecting packages, and this can
lead to picking up 64-libs for 32-bit builds. To work around this, force
the use of pkg-config only for detecting libcrypto, zlib, jansson and
other package dependencies.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Liron Himi <lironh@marvell.com>
Tested-by: Lee Daly <lee.daly@intel.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Martin Spinler <spinler@cesnet.cz>
Allows i40e and mlx5 PMDs to compile on Windows and disable other drivers.
Disable few i40e warnings with Clang such as comparison of integers of
different signs and macro redefinitions.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close(). With this change the
private port resources are released in the .dev_close callback.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Remove its own bit operation APIs and use the common one,
this can reduce the code duplication largely.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Add Rx descriptor limit for number of segments per MTU.
PMD doesn't support Jumbo Rx scatter gather hence set 1 segment per
MTU. Some applications can adjust mbuf_size based on this value.
For others PMD detects the condition where Rx packet length cannot
be held by configured mbuf size and logs the message.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
In case of bnx2xvf pmd, tx packets can support vland id in 2 ways:
1. Setting the mbuf ol_flags=PKT_TX_VLAN_PKT and passing the
vlanid in mbuf->vlan_tci.
2. The tx packet itself has the vlan id included in the packet.
The first case is working as expected but the second case where
the vlan id is included in thetx packets itself was found not
working as expected. To handle that we need to properly set the
start_bd bitfield and the vlan_or_ethertype instead of setting it
to just the ethertype in case of VF.
Signed-off-by: Souvik Dey <sodey@rbbn.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Add support the set_mc_addr_list device operation in the bnx2xvf PMD.
The configured addresses are stored in the device private area, so
they can be flushed before adding new ones.
Without this v6 multicast packets were properly forwarded to the
Guest VF.
Signed-off-by: Souvik Dey <sodey@rbbn.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
For VLAN packet the tci is saved in rx_mb->vlan_tci, however the
STRIPPED offload flag is not set along with PKT_RX_VLAN flag.
Set the PKT_RX_VLAN_STRIPPED flag as well.
Fixes: 380a7aab1a ("mbuf: rename deprecated VLAN flags")
Fixes: b37b528d95 ("mbuf: add new Rx flags for stripped VLAN")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
PMD handles fast path completions in the Rx handler and control path
completions in the interrupt handler. They both are processing
completions from the same fastpath completion queue. There is a
potential for race condition when these two paths are processing
the completions from the same queue and trying to updating Rx Producer.
Add a fastpath Rx lock between these two paths to close this race.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
The fastpath task queue handler resets the fastpath scan flag
unconditionally, this patch changes that to reset the flag
only if it was set.
Fixes: 08a6e472c3 ("net/bnx2x: fix packet drop")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Use kernel headers for __le* types to avoid potential conflicts
resulting in redefinition errors for some Linux build environments.
Add check for FreeBSD execution environments.
Without this fix, aarch64 builds can fail with error below:
In file included from ../drivers/net/bnx2x/bnx2x.h:22,
from ../drivers/net/bnx2x/bnx2x_ethdev.c:8:
../drivers/net/bnx2x/bnx2x_osal.h:27:17: error:
conflicting types for ‘uint64_t’
#define __le64 uint64_t
^~~~~~~~
In file included from /usr/include/stdint.h:37,
from /usr/lib/gcc/aarch64-linux-gnu/8/include/stdint.h:9,
from ../lib/librte_eal/common/include/arch/arm/rte_byteorder.h:16,
from ../drivers/net/bnx2x/bnx2x.h:17,
from ../drivers/net/bnx2x/bnx2x_ethdev.c:8:
/usr/include/aarch64-linux-gnu/bits/stdint-uintn.h:27:20: note:
previous declaration of ‘uint64_t’ was here
typedef __uint64_t uint64_t;
^~~~~~~~
There is also one minor change mixed in this commit:
Some use of __FreeBSD__ are replaced by RTE_EXEC_ENV_FREEBSD.
Fixes: 38dff79ba7 ("net/bnx2x: update HSI")
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Tested-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Tested-by: Gavin Hu <gavin.hu@arm.com>
Use latest firmware 7.13.11.
7.13.11 FW changelog:
- Packets from a VF with pvid configured which were sent with a
different vlan were transmitted instead of being discarded.
- In some multi-function configurations, inter-PF and inter-VF
Tx switching is incorrectly enabled.
- Wrong assert code in FLR final cleanup in case it is sent not
after FLR.
- Chip may stall in very rare cases under heavy traffic with FW GRO
enabled.
- VF malicious notification error fixes.
- Default gre tunnel to IPGRE which allows proper RSS for IPGRE
packets, L2GRE traffic will reach single queue.
- Removes unnecessary internal mem config, latest FW performs this
autonomously.
Update the PMD version to 1.1.0.1.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update hardware software common base driver code in preparation to
update the firmware to version 7.13.11.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update and reorganize HW registers in preparation to update the firmware
to version 7.13.11.
Move HW_INTERRUT_ASSERT_SET_0 out from ecore_reg.h to bnx2x.h.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For SRIOV, fastpath status blocks are not allocated resulting in
segfault. Separate out fastpath DMA allocation/free from rest of
memory allocation/free. It is now done as part of NIC load/unload.
Comment indentation changes in bnx2x_alloc_hsi_mem() and
bnx2x_free_hsi_mem() APIs.
Fixes: f0219d98de ("net/bnx2x: fix interrupt flood")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
We do not need to schedule periodic poll for slowpath link events
for SRIOV. The link events are handled by the PF driver.
Fixes: 6041aa619f ("net/bnx2x: fix poll link status")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
The logic to read vf_id used by ACQUIRE/TEARDOWN_Q/RELEASE TLVs,
multiplexed return value to convey vf_id value and status of read vf_id
API. This lets to segfault at dev_start() as resources are not properly
cleaned and re-allocated.
Fix read vf_id API to differentiate between vf_id value and return
status. Adjust the status checking accordingly.
Added bnx2x_vf_teardown_queue() API and moved relevant code from
bnx2x_vf_unload() to new API.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Replace rte_intr_enable() with rte_intr_ack() API
for acking an interrupt in interrupt handlers and
rx_queue_intr_enable() callbacks of PMD's.
This is inline with original intent of this change in PMDs
to ack interrupts after handling is completed if
device is backed by UIO, IGB_UIO or VFIO(with INTx).
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
For each driver where we optionally disable it, add in the reason why it's
being disabled, so the user knows how to fix it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
