Remove the unused element request_lport_map in struct fm10k_mac_ops.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Some cleanups to better reflect the code that was actually pushed out to
the upstream Linux community.
Among the above cleanups, a few macros such as FM10K_RXINT_TIMER_SHIFT are
removed, but they are needed in dpdk/fm10k, so we have to put all these
necessary macros into fm10k_osdep.h.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Per comments from an upstream kernel patch, and looking at how TLV
LE_STRUCT code works, we actually want these structures to be 4byte
aligned, not 1byte aligned.
In practice, 1byte alignment has worked so far because all our
structures end up being a multiple of 4. But if a future TLV
structure were added that had a u8 or similar sticking on the end things
would break. Fix this by using 4byte alignment which will prevent the
TLV LE_STRUCT code from breaking. Update the comment explaining that we
need 4byte alignment of our structures.
Fixes: 925c862cbc ("fm10k/base: pack TLV overlay structures")
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The comment for fm10k_iov_msg_lport_state_pf was changed during
review of kernel driver, and the new wording is slightly clearer.
Re-write the comment in base code based on this new wording.
Fix a number of mailbox comment issues with function header comments,
lower-case acronyms (i.e. FIFO, TLV), incorrect function names in
DEBUGFUNC(), duplicate comments and a stubbed-out header comment for
fm10k_sm_mbx_init.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The vid variable name is shorthand for VLAN ID, so we should use this in
comments explaining what is happening.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The Linux Kernel provides the OS a call "pcie_get_minimum_link" which
can crawl the PCIe tree and determine the actual minimum link speed of a
device which is a more general check than provided by
is_slot_appropriate. Thus, the kernel driver does not use or want the
is_slot_appropriate function call. Add a NO_IS_SLOT_APPROPRIATE_CHECK
definition which can be defined to remove the code.
If left undefined (the default) then the code will all be active and no
driver changes should be necessary.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Use memcpy instead of copying MAC address byte-by-byte.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Using the BIT macro can simplify the bit-shifting operation and make the
code look clean. Similar to how this is handled in the i40e base code,
define a macro for it in DPDK, so it can be used here too.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
"else" is not generally useful after a break or return.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Recommended line length maximum is 80 characters
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Add comments which properly explain the undocumented use of bits in
TDLEN register prior to VF initializing it to the correct value. Note
that the mechanism is entirely software-defined and explain its purpose
to help reduce confusion in the future.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
VF drivers must detect how many queues are available. Previously, the
driver assumed that each VF has at minimum 1 queue. This assumption is
incorrect, since it is possible that the PF has not yet assigned the
queues to the VF by the time the VF checks.
To resolve this, we added a check first to ensure that the first queue
is, in fact, owned by the VF at init_hw_vf time.
However, the code flow did not reset hw->mac.max_queues to 0.
In some cases, such as during reinit flows, we call init_hw_vf
without clearing the previous value of hw->mac.max_queues. Due to this,
when init_hw_vf errors out, if its error code is not properly handled
the VF driver may still believe it has queues which no longer belong to
it. Fix this by clearing the hw->mac.max_queues on exit due to errors.
Fixes: 8b8264bdb9 ("fm10k/base: check VF has a queue")
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Use bitshift instead of a divisor, because this is faster, and
eliminates any need for a '0' check. In our case, this even works
out because default Gen3 will be 0.
Because of this, we are also able to remove the check for non-zero value
in the VF code path since that will already be the default Gen3 case.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Make functions that are only referenced locally static.
Wrap fm10k_msg_data fm10k_iov_msg_data_pf[] in the new ifndef
NO_DEFAULT_SRIOV_MSG_HANDLERS so that drivers with custom SR-IOV
message handlers can strip it.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Since the resultant data type of the mac_update.mac_upper field is u16,
it does not make sense to typecast u8 variables to u32 first.
Fixes: 7223d200c2 ("fm10k: add base driver")
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The new share code makes fm10k_msg_update_pvid_pf function static, so we
can not refer to it now in fm10k_ethdev.c. The registered PF handler is
almost the same as the default PF handler, removing it has no impact on
mailbox.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Using SSE instructions to parse error flags in HW Rx descriptor,
then set corresponding bits of mbuf.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
When the TX function tries to free a bunch of mbufs, it will free
them one by one. This change will scan the free list and merge the
requests in case they belongs to same pool, then free once, which
will reduce cycles on freeing mbufs.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
fm10k switch core uses source MAC + VID + SGLORT to do
look up in MAC table. If no match, an exception interrupt
will be sent to the switch manager. Too much of this kind
of exception interrupts cause switch manager side high CPU
usage.
To reproduce this issue, one DPDK testpmd runs on a server
with one fm10k NIC, mac forwards test traffic from one of
fm10k ports to another port. The CPU usage for the switch
manager will go up to about 20% for test traffic rate at
10G bps, comparing to near 0% for no test traffic.
This patch fixes this issue. A default SGLORT is assigned
to each TX queue. This default value works for non-VMDq mode
and current VMDq example. For advanced VMDq usage, e.g.
different source MAC address for different TX queue, FTAG
forwarding function could be used to change this default
SGLORT value.
Fixes: 9ae6068c86 ("fm10k: add dev start/stop")
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
In FM10K, a single PCIe port can derive out a few logical ports,
like SRIOV PF/VF devices, VMDQ objects. To better manage them, FM10K
silicon assigns a Unique GLORT ID to each logical port.
When a logical port sends a broadcast packet, the silicon will flood
it to all logical ports, including the one that sent the broadcast packet.
To prevent this, silicon has an rxq register to store the glort id of
the logical port that queue binds to.
FM10K has a switch core inside, which has a loopback suppression
mechanism in the switch level. Switch level loopback suppression mostly
works for the ether port traffic.
This patch assigns a SGLORT for each RX queue, and enables PCIe port
level loopback suppression.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
When the PF establishes a connection with Switch Manager(SM), it receives
a logical port range from SM, and registers certain logical ports from
that range. Then a default VID will be sent back from the SM.
This whole transaction - finishing with the default VID being set -
needs to be completed before dev_init returns. If not, the interrupt
setting will subsequently be changed in dev_start according to the RX
queue number, and that can cause this transaction to fail.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Interrupt mode framework has per-queue enable/disable functions.
Implement these two functions for fm10k driver.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Previous dev_stop function stops the rx/tx queues. This patch adds logic
to disable rx queue interrupt, clean the datapath event and queue/vector
map.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
In interrupt mode, each rx queue can have one interrupt to notify the
application when packets are available in that queue. Some queues
also can share one interrupt.
Currently, fm10k needs one separate interrupt for mailbox. So, only those
drivers which support multiple interrupt vectors e.g. vfio-pci can work
in fm10k interrupt mode.
This patch uses the RXINT/INT_MAP registers to map interrupt causes
(rx queue and other events) to vectors, and enable these interrupts
through kernel drivers like vfio-pci.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
rx_descriptor_done is used by interrupt mode example application
(l3fwd-power) to check rxd DD bit to decide the RX trend,
then l3fwd-power will adjust the cpu frequency according to
the result.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
In fm10k, PF, VF, VMDQ or queues binding to flow director rule can
be considered as a logical port. Original implementation only creates
a single port for all cases. This change creates 128 logical ports;
first 64 for PF and VMDQ, second 64 for flow director.
Registers DGLORTDEC/DGLORTMAP define rules for how to classify packets
into different queues. Currently only PF and VMDQ cases are considered.
This change add rules for flow director.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
In fm10k_recv_scattered_pkts function, a packet is stored in a linked list,
offload flags such as PKT_RX_VLAN_PKT should be set in the first segment.
Fixes: 6b59a3bc82 ("fm10k: fix VLAN in Rx mbuf")
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
After introducing vPMD feature, fm10k driver will select best
Rx/Tx in running time. Original implementation selects Rx/Tx
silently without notifications.
This patch adds debug info to notify user what actual Rx/Tx
func are used.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Steps to reproduce the bug:
1. All Rx offloading is disabled and start the device, then
Vector Rx is used.
2. Stop the device. Re-configure to enable hw_ip_checksum = 1,
start the device again.
3. In this case, assume regular Rx should be used since Vector
Rx doesn't support ip checksum offload. But actually Vector
Rx is used and cause checksum won't be done by hardware.
The reason is after re-configuring, driver misses an "else" in
func fm10k_set_rx_function(). Then Rx func in last round are
used.
Fixes: 77a8ab47eb ("fm10k: select best Rx function")
Reported-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
fm10k driver will meet compile error on non-x86 platforms due to
SSE instructions. Original implementation didn't have switch to
turn off vPMD.
The improvement introduces a macro to turn on/off vPMD functions,
it's on by default. On non-x86 platforms, it can simply be turned
off to fix compile issue.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
When the fm10k port is closed, both func tx_queue_clean() and
fm10k_tx_queue_release_mbufs_vec() will try to release buffer in
SW ring. The latter func won't do sanity check on those pointers
and cause crash.
The fix removed Vector TX buffer release func since it can share
the release functions with regular TX.
Fixes: fb9066e479 ("fm10k: reset and release mbuf for vector Tx")
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
vlan_tci should be copied from RX descriptor to mbuf,
and flag PKT_RX_VLAN_PKT should be set for every RX packet,
this patch fixes this issue.
Packets in fm10k device always carry at least one VLAN tag.
For those packets coming in without VLAN tag,
the port default VLAN tag will be used.
So in fm10k, always PKT_RX_VLAN_PKT flag is set and vlan_tci
is valid for each RX packet's mbuf.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Following the same approach taken with dev_started field
in rte_eth_dev_data structure, this patch adds two new fields
in it, rx_queue_state and tx_queue_state arrays, which track
which queues have been started and which not.
This is important to avoid trying to start/stop twice a queue,
which will result in undefined behaviour
(which may cause RX/TX disruption).
Mind that only the PMDs which have queue_start/stop functions
have been changed to update this field, as the functions will
check the queue state before switching it.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Some comments have a wrong space between /** and <.
Seen with
git grep '\*\* <'
Reported-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Use new function rte_eth_copy_pci_info.
Copy device info for the following pdevs:
bnx2x
cxgbe
e1000
enic
fm10k
i40e
ixgbe
mlx4
mlx5
virtio
vmxnet3
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add xstats() functions and statistic strings.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Vector RX function will process 4 packets at a time. When the RX
ring wrapps to the tail and the left descriptor size is not multiple
of 4, SW will overwrite memory that not belongs to it and cause crash.
The fix will allocate additional 4 HW/SW spaces at the tail to avoid
overwrite.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add func fm10k_set_tx_function to decide the best TX func in
fm10k_dev_tx_init.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Vector TX use different way to manage TX queue, it's necessary
to use different functions to reset TX queue and release mbuf
in TX queue. So, introduce 2 function pointers to do such ops.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Since Vector RX use different variables to trace RX HW ring, it
leads to need different func to release mbuf properly.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
This patch add below functions:
1. Add function fm10k_rxq_rearm to re-allocate mbuf for used desc
in RX HW ring.
2. Add 2 functions, in which using SSE instructions to parse RX desc
to get pkt_type and ol_flags in mbuf.
3. Add func fm10k_recv_raw_pkts_vec to parse raw packets, in which
includes possible chained packets.
4. Add func fm10k_recv_pkts_vec to receive single mbuf packet.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add new function fm10k_params_init to initialize all fm10k related
variables.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
