Currently, the "requested_fc_mode" lacks rollback when enabling link
FC or PFC fails.
For example, this may result an incorrect FC mode after a reset.
Fixes: d4fdb71a0e ("net/hns3: fix flow control mode")
Fixes: 62e3ccc2b9 ("net/hns3: support flow control")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The Rx/Tx queue numbers should be greater than TC number, this patch adds
this check for PF before updating the mapping between TC and queue.
Fixes: a951c1ed3a ("net/hns3: support different numbers of Rx and Tx queues")
Fixes: 76d794566d ("net/hns3: maximize queue number")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The net/vhost PMD does not comply with the ethdev offload API as it does
not report Rx/Tx offload capabilities wrt TSO and checksum offloading.
On the other hand, the net/vhost PMD lets guest negotiates TSO and
checksum offloading.
Changing the behavior for Rx/Tx offload flags handling won't
improve/fix this situation and will break applications that might have
been relying on implicit support of TSO in this driver.
Revert this behavior change until we have a complete fix.
Fixes: ca7036b4af ("vhost: fix offload flags in Rx path")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
A meter may handle Rx queue reference in his sub-policies.
In stop operation, all the Rx queues are released.
Wrongly, the meter reference was not released before
destroying the Rx queues what cause an error in stop.
Release the Rx queues meter references in stop operation.
Fixes: fc6ce56bba ("net/mlx5: prepare sub-policy for flow with meter")
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently, the counter offset support is discovered by creating the
rule with invalid offset counter and drop action in root table. If
the rule creation fails with EINVAL errno, that mean counter offset
is not supported in root table.
However, drop action may not be supported in some rdma-core version
in root table. In this case, the discover code will not work properly.
This commits changes flow attribute to egress. That removes all the
extra fate actions in the flow to avoid any unsupported fate actions
make the discover code fail time to time.
Fixes: 994829e695 ("net/mlx5: remove single counter container")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently, configuring a mlx device, it will allocate its
own process private in mlx5_proc_priv_init() and only frees
it when closing the device. This will lead to a memory leak,
when a device is configured repeatedly.
For example:
for(...)
do
rte_eth_dev_configure
rte_eth_rx_queue_setup
rte_eth_tx_queue_setup
rte_eth_dev_start
rte_eth_dev_stop
done
Fixes: 120dc4a7dc ("net/mlx5: remove device register remap")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Currently, configuring a mlx device, it will allocate its
own process private in mlx5_proc_priv_init() and only frees
it when closing the device. This will lead to a memory leak,
when a device is configured repeatedly.
For example:
for(...)
do
rte_eth_dev_configure
rte_eth_rx_queue_setup
rte_eth_tx_queue_setup
rte_eth_dev_start
rte_eth_dev_stop
done
Fixes: 97d37d2c1f ("net/mlx4: remove device register remap")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Depending on the breakout mode of the physical ports the internal NFP
port number might differ from the actual physical port number. Prior to
this patch the physical port number was used when making configuration
changes to the physical ports (enable, admin up etc). After this change
the internal port number is now correctly used for configuration
changes.
Fixes: 5e15e799d6 ("net/nfp: create separate entity for PF device")
Cc: stable@dpdk.org
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
When getting meter flow_id bits, there's an issue that not handling
correctly if flow_id is 0.
This fix this issue that when flow_id is 0, treat it as 1 bit.
Fixes: 83306d6c46 ("net/mlx5: fix meter statistics")
Cc: stable@dpdk.org
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
One of the user parameters for the flow AGE action is the
action context. This context should be provided back to the
user when the action is aged-out.
While this context is NULL, a default value should be provided
by the PMD: the rte_flow pointer in case of rte_flow_create API
and the action pointer in case of the rte_flow_action_handle API.
The default for rte_flow_action_handle was set correctly,
while in case of rte_flow_create it wrongly remained NULL.
This patch set the default value for rte_flow_create case to be
the rte_flow pointer.
Fixes: f9bc5274a6 ("net/mlx5: allow age modes combination")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Current the ASO age action was supported in the non-root table,
and the counter based age action was be used in the root table.
The FDB table skips group 0 on MLX5 PMD by adding implicit rule
that jump to non-root table, but PMD code use the original group
value for checking.
This patch adds the transfer checking for ASO age action.
Fixes: f9bc5274a6 ("net/mlx5: allow age modes combination")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently RSS expansion only supports GRE and GRE KEY.
This patch adds RSS expansion for NVGRE item so PMD can expand flow item
correctly.
Fixes: ea81c1b816 ("net/mlx5: fix NVGRE matching")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
While there's mirror action prior to the meter action in the E-Switch
flow, means that the packets should be duplicated into port firstly,
and then do meter and send to the original destination.
MLX5 PMD will split the above E-Switch flow into two sub flows,
similar as mirror with modify action before.
Fixes: 07627fbf15 ("net/mlx5: support E-Switch mirroring with modify action")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
In case of bonding, orchestrator wants to use same devargs for LAG and
non-LAG scenario to probe representor on PF1 using PF1 PCI address
like "<DBDF_PF1>,representor=pf1vf[0-3]".
This patch changes PCI address check policy to allow PF1 PCI address for
representors on PF1.
Note: detaching PF0 device can't remove representors on PF1. It's
recommended to use primary(PF0) PCI address to probe representors on
both PFs.
Fixes: f926cce3fa ("net/mlx5: refactor bonding representor probing")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The memory barrier is used to ensure that the response is returned
only after the Tx/Rx function is set, it should place after the Rx/Tx
function is set.
Fixes: 2aac5b5d11 ("net/mlx5: sync stop/start with secondary process")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The memory barrier is used to ensure that the response is returned
only after the Tx/Rx function is set, it should place after the Rx/Tx
function is set.
Fixes: 0203d33a10 ("net/mlx4: support secondary process")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reproduced with '--buildtype=debugoptimized' config,
compiler version: gcc (GCC) 12.0.0 20210509 (experimental)
There are multiple build errors, like:
In file included from ../drivers/net/tap/tap_flow.c:13:
In function ‘rte_jhash_2hashes’,
inlined from ‘rte_jhash’ at ../lib/hash/rte_jhash.h:284:2,
inlined from ‘tap_flow_set_handle’ at
../drivers/net/tap/tap_flow.c:1306:12,
inlined from ‘rss_enable’ at ../drivers/net/tap/tap_flow.c:1909:3,
inlined from ‘priv_flow_process’ at
../drivers/net/tap/tap_flow.c:1228:11:
../lib/hash/rte_jhash.h:238:9:
warning: ‘flow’ may be used uninitialized [-Wmaybe-uninitialized]
238 | __rte_jhash_2hashes(key, length, pc, pb, 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/tap/tap_flow.c: In function ‘priv_flow_process’:
../lib/hash/rte_jhash.h:81:1: note: by argument 1 of type ‘const void *’
to ‘__rte_jhash_2hashes.constprop’ declared here
81 | __rte_jhash_2hashes(const void *key, uint32_t length, uint32_t *pc,
| ^~~~~~~~~~~~~~~~~~~
../drivers/net/tap/tap_flow.c:1028:1: note: ‘flow’ declared here
1028 | priv_flow_process(struct pmd_internals *pmd,
| ^~~~~~~~~~~~~~~~~
Fix strict aliasing rule by using union.
Bugzilla ID: 690
Fixes: de96fe68ae ("net/tap: add basic flow API patterns and actions")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Reproduced with '--buildtype=debugoptimized' config,
compiler version: gcc (GCC) 12.0.0 20210509 (experimental)
There are multiple build errors, like:
../drivers/net/ice/base/ice_switch.c: In function ‘ice_add_marker_act’:
../drivers/net/ice/base/ice_switch.c:3727:15:
warning: array subscript ‘struct ice_aqc_sw_rules_elem[0]’
is partly outside array bounds of ‘unsigned char[52]’
[-Warray-bounds]
3727 | lg_act->type = CPU_TO_LE16(ICE_AQC_SW_RULES_T_LG_ACT);
| ^~
In file included from ../drivers/net/ice/base/ice_type.h:52,
from ../drivers/net/ice/base/ice_common.h:8,
from ../drivers/net/ice/base/ice_switch.h:8,
from ../drivers/net/ice/base/ice_switch.c:5:
../drivers/net/ice/base/ice_osdep.h:209:29:
note: referencing an object of size 52 allocated by ‘rte_zmalloc’
209 | #define ice_malloc(h, s) rte_zmalloc(NULL, s, 0)
| ^~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ice/base/ice_switch.c:3720:50:
note: in expansion of macro ‘ice_malloc’
lg_act = (struct ice_aqc_sw_rules_elem *)ice_malloc(hw, rules_size);
These errors are mainly because allocated memory is cast to
"struct ice_aqc_sw_rules_elem *" but allocated size is less than the size
of "struct ice_aqc_sw_rules_elem".
"struct ice_aqc_sw_rules_elem" has multiple other structs has unions,
based on which one is used allocated memory being less than the size of
"struct ice_aqc_sw_rules_elem" is logically correct but compiler is
complaining about it.
Since the allocation is done explicitly and both producer and consumer
are internal, safe to ignore the warnings. Also to prevent any side
affect disabling the compiler warning for now, until proper fix done.
Reducing the warning disable to gcc >= 11 version.
Bugzilla ID: 678
Fixes: c7dd159311 ("net/ice/base: add virtual switch code")
Fixes: 02acdce2f5 ("net/ice/base: add MAC filter with marker and counter")
Fixes: f89aa3affa ("net/ice/base: support removing advanced rule")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Fixed speed mode is not supported currently, this patch
removes configurations for this mode and adds fault handling
for ETH_LINK_SPEED_FIXED.
Fixes: 4f09bc55ac ("net/igc: implement device base operations")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
The kernel driver supports VF RSS configuration message
"VIRTCHNL_OP_GET_RSS_HENA_CAPS and VIRTCHNL_OP_SET_RSS_HENA",
this patch adds PMD support for these messages.
Fixes: b81295c474 ("net/i40e: add user callback for VF to PF message")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
In the loop, when the index of array "vsi->rss_key" is equal
to "vsi->rss_key_size", the array will be accessed out of bounds.
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The QW0 of Tx context descriptor should be reset to 0, otherwise the
previous hardware writeback value may pollute the next context descriptor
write.
Fixes: a2b29a7733 ("net/avf: enable basic Rx Tx")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For dev_ops not supported by the secondary process, either return -EPERM
or return without doing anything. In both cases log a warning.
It's still application's responsibility to avoid calls like that and
those changes are for debugging/informational purposes.
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
rte_pci_device and rte_eth_dev are process-local structures. Therefore
ena_adapter::pdev and ena_adapter::rte_dev cannot be used universally.
Both ena_timer_wd_callback and ena_interrupt_handler_rte needs access to
the rte_eth_dev, but as they are being setup and executed in the primary
process, it is safe to pass there the same pointer, which is used for
the device configuration.
In all other cases, except the eth_ena_dev_init(), the rte_eth_dev_data
is used instead.
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
To make it possible to the app to determine if the hash was calculated
for the packet or not, the PKT_RX_RSS_HASH should be set in the mbuf's
ol_flags.
As the PMD wasn't setting that, the application couldn't check if there
is a hash in a proper way.
The hash is valid only if it's UDP or TCP and the IP packet wasn't
fragmented.
Fixes: e5df9f33db ("net/ena: fix passing RSS hash to mbuf")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
Thread argument changed to wrong value during thread name addition,
fixing that bug.
Fixes: fdefe038eb ("net/ark: set generator delay thread name")
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tunnel offload API requires application to query PMD for specific flow
items and actions. Application uses these PMD specific elements to
build flow rules according to the tunnel offload model.
The model does not restrict private elements location in a flow rule,
but the current MLX5 PMD implementation expects that tunnel offload
rule will begin with PMD specific elements.
The patch removes that placement limitation.
Fixes: 4ec6360de3 ("net/mlx5: implement tunnel offload")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The admin-configured vNIC settings (i.e. via CIMC or UCSM) now include
Geneve offload. Use that setting to decide whether to enable or
disable Geneve offload and remove the devarg 'geneve-opt'.
Also, the firmware now allows the driver to change the Geneve port
number. So extend udp_tunnel_port_{add,del} to accept Geneve port, in
addition to VXLAN.
Fixes: 93fb21fdbe ("net/enic: enable overlay offload for VXLAN and GENEVE")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
A terminated pthread should be joined or detached so that its associated
resources are released.
The "ice-reset-<vf_id>" threads are used to service some reset task in
the background, but they are never joined by the thread that created
them.
The easiest solution is to detach new threads.
The Windows EAL did not provide a pthread_detach wrapper but there is no
resource to release for Windows threads, so add an empty wrapper.
Fixes: 3b3757bda3 ("net/ice: get VF hardware index in DCF")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
A terminated pthread should be joined or detached so that its associated
resources are released.
The "ark-delay-pg" thread is just used to delay some task but it is never
joined by the thread that created it.
The easiest solution is to detach the new thread.
Fixes: 727b3fe292 ("net/ark: integrate PMD")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ed Czeck <ed.czeck@atomicrules.com>
If the FEC mode was not supported, it should return error code.
This patch also adds a space when log error info.
Fixes: 9bf2ea8dbc ("net/hns3: support FEC")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The memory barrier is used to ensure that the response is returned
only after the Tx/Rx function is set, it should place after the Rx/Tx
function is set.
Fixes: 23d4b61fee ("net/hns3: support multiple process")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This secondary process should not send request to start/stop Rx/Tx,
this patch fixes it.
Fixes: 23d4b61fee ("net/hns3: support multiple process")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The mailbox message id is uint8_t, but the unsupported mailbox message
id was logged by uint16.
Fixes: 463e748964 ("net/hns3: support mailbox")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The TM QCN error event should report by RAS other than MSIX.
Also this patch adds fifo int enable configuration before the TM QCN
error event is enabled.
Fixes: f53a793bb7 ("net/hns3: add more hardware error types")
Fixes: 3903c05382 ("net/hns3: remove read when enabling TM QCN error event")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Support to enable and disable QINQ hardware strip, when configure VLAN
offload with QINQ strip mask. If there are packets have QINQ tag to RSS,
users should enable QINQ strip before configuring the RSS.
Fixes: 220b0e49bc ("net/txgbe: support VLAN")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
The hardware doesn't support counting the number of bytes that through
the fdir rule. Therefore, the corresponding out parameters (e.g.
bytes_set/bytes) is set to zero.
Fixes: fcba820d9b ("net/hns3: support flow director")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently in the VF reset scenario, the VF performs the set
alive operation before restoring the configuration completed,
which may cause the hardware to work in an abnormal state.
This patch fix this problem by set VF alive after restoring
the configuration is completed.
Fixes: a5475d61fa ("net/hns3: support VF")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The fdir hash map hold the pointers of fdir rule elements, it needs to
be set to NULL when clear all fdir rules.
Fixes: fcba820d9b ("net/hns3: support flow director")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
If clear FDIR rules fail, the error code was logged, but the error code
was useless because it was the sum of all fail code.
This patch fixes it by log the success cnt and fail cnt.
Fixes: fcba820d9b ("net/hns3: support flow director")
Fixes: 8eed8acc81 ("net/hns3: add error code to some logs")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Prior to this change, two implementations of rx_syscall_handler
existed although only one was needed (for the zero copy path which
is only available from kernel 5.4 and onwards). Remove the second
definition from compat.h and move the first definition back to where
it is called in the Rx function. Doing this removes a build warning
on kernels before 5.4 which complained about the second function
being defined but not used.
Fixes: 2aa51cdd55 ("net/af_xdp: fix trigger for syscall on Tx")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Before this change the dev_infos callback always reported RSS
capabilities regardless of whether the capability is supported by the
device or not. First check the capabilities field in the BAR of the
device and advertise RSS functionality accordingly.
Fixes: 8b945a7f7d ("drivers/net: update Rx RSS hash offload capabilities")
Cc: stable@dpdk.org
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
This version update contains:
* memcpy mapping to the dpdk-optimized version.
* ena_com (HAL) update to the latest version (from 18.09.2020).
* Bug fixes for the large LLQ headers and devargs parsing.
* Bug fix for the default ring size.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Remove invalid ring size alignment logic and add default Rx and Tx port
ring sizes to the device info spec.
The logic in lines 1297 and 1371 is invalid. The
RTE_ETH_DEV_FALLBACK_RX_RINGSIZE (and the TX counterpart) is a value
that rte_eth_rx_queue_setup() will set if
dev_info.default_rxportconf.ring_size is 0 and user provided 0 in
nb_rx_desc argument. However the current code treats it as a hint for
the PMD to change the ring size to internal defaults.
Additionally since the ENA_DEFAULT_RING_SIZE is defined, report it in
the device capabilities so that both rte_ethdev code and the user can
utilize it for device configuration.
Fixes: ea93d37eb4 ("net/ena: add HW queues depth setup")
Cc: stable@dpdk.org
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
pthread_cond_timedwait() may spuriously wakeup according to POSIX.
Therefore it is required to check whether predicate is actually true
before finishing the waiting loop.
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
swap*_*_le() functions are not used anywhere and besides there are rte
alternatives already present.
Fixes: 1173fca25a ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
