This commit fixes the following error which was reported when
compiling with clang by removing the option.
error: unknown warning option '-Wno-unused-but-set-variable'
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
This commit fixes the following error which was reported when
compiling with clang by moving the function inside an
RTE_LIBRTE_FM10K_DEBUG_RX ifdef block.
error: unused function 'dump_rxd'
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
There was no error checking after calling rte_reorder_create.
Move the creation of the reorder buffer before launching threads
in case of memory error.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Fix a couple of doxygen comments in mbuf structure:
- seqn had no doxygen syntax.
- usr was not generating proper link to function.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In C++11 concatenated string literals need to have a space in between.
Found with clang++-3.4, IIRC g++-4.8 also complains about this.
Sample error message:
error: invalid suffix on literal; C++11 requires a space between literal
and identifier [-Wreserved-user-defined-literal]
Signed-off-by: Stefan Puiu <stefan.puiu@gmail.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
The current implementation of rte_kni_rx_burst polls the fifo for buffers.
Irrespective of success or failure, it allocates the mbuf and try to put them into the alloc_q
if the buffers are not added to alloc_q, it frees them.
This waste lots of cpu cycles in allocating and freeing the buffers if alloc_q is full.
The logic has been changed to:
1. Initially allocand add buffer(burstsize) to alloc_q
2. Add buffers to alloc_q only when you are pulling out the buffers.
Signed-off-by: Hemant Agrawal <hemant@freescale.com>
Reviewed-by: Jay Rolette <rolette@infiniteio.com>
LPM table overflow may occur if table is full and added rule has
the biggest depth that already have some rules.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
* support calling rte_vhost_driver_register after rte_vhost_driver_session_start
* add mutext to protect fdset from concurrent access
* add busy flag in fdentry. this flag is set before cb and cleared after cb is finished.
mutex lock scenario in vhost:
* event_dispatch(in rte_vhost_driver_session_start) runs in a separate thread, infinitely
processing vhost messages through cb(callback).
* event_dispatch acquires the lock, get the cb and its context, mark the busy flag,
and releases the mutex.
* vserver_new_vq_conn cb calls fdset_add, which acquires the mutex and add new fd into fdset.
* vserver_message_handler cb frees data context, marks remove flag to request to delete
connfd(connection fd) from fdset.
* after cb returns, event_dispatch
1. clears busy flag.
2. if there is remove request, call fdset_del, which acquires mutex, checks busy flag, and
removes connfd from fdset.
* rte_vhost_driver_unregister(not implemented) runs in another thread, acquires the mutex,
calls fdset_del to remove fd(listenerfd) from fdset. Then it could free data context.
The above steps ensures fd data context isn't freed when cb is using.
VM(s) should have been shutdown before rte_vhost_driver_unregister.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
for vhost-cuse, ifname is the name of the tap device
for vhost-user, ifname is the name of the unix domain socket path
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Signed-off-by: Przemyslaw Czesnowicz <przemyslaw.czesnowicz@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
In rte_vhost_driver_register(), vhost unix domain socket listener fd is created
and added to polled(based on select) fdset.
In rte_vhost_driver_session_start(), fds in the fdset are checked for
processing. If there is new connection from qemu, connection fd accepted is
added to polled fdset. The listener and connection fds in the fdset are
then both checked. When there is message on the connection fd, its
callback vserver_message_handler is called to process vhost-user messages.
To support identifying which virtio is from which guest VM, we could call
rte_vhost_driver_register with different socket path. Virtio devices from
same VM will connect to VM specific socket. The socket path information is
stored in the virtio_net structure.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Signed-off-by: Przemyslaw Czesnowicz <przemyslaw.czesnowicz@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
remove set_memory_table ops
vhost-cuse or vhost-user will both implement their own set_memory_region handler.
In current vhost-cuse implementation, guest numa memory isn't supported.
Assume that guest memory is backed by only one file.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Signed-off-by: Przemyslaw Czesnowicz <przemyslaw.czesnowicz@intel.com>
This functions accepts a virtual address and pid(qemu), and maps it into
current process(vhost)'s address space.
The memory behind the virtual address should be backed by a file,
and virtual address should be the starting address.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
File descriptor is copied from qemu process into vhost process.
vhost-user doesn't need eventfd kernel module to copy fds between processes.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Signed-off-by: Przemyslaw Czesnowicz <przemyslaw.czesnowicz@intel.com>
Rename vhost-net-cdev.h to vhost-net.h.
This file defines common operations provided by virtio-net(.c).
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Create vhost_cuse directory and move vhost-net-cdev.c into vhost_cuse.
vhost-cuse driver will be divided into two parts: cuse driver specific message
handling(in cuse directory) and common message handling(in virtio-net.c).
vhost ioctl message is pre-processed in cuse and then sent to virtio-net
if is not terminated.
virtio-net.c provides common message handling for both vhost-cuse and vhost-user.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
VIRTIO_NET_F_CTRL_RX is dependant on VIRTIO_NET_F_CTRL_VQ.
Observed that virtio-net driver in guest would crash with only CTRL_RX enabled.
In virtnet_send_command:
/* Caller should know better */
BUG_ON(!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ) ||
(out + in > VIRTNET_SEND_COMMAND_SG_MAX));
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Example showing how callbacks can be used to insert a timestamp
into each packet on RX. On TX the timestamp is used to calculate
the packet latency through the app, in cycles.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Add optional support for inline processing of packets inside the RX
or TX call. For an RX callback, what happens is that we get a set of
packets from the NIC and then pass them to a callback function, if
configured, to allow additional processing to be done on them, e.g.
filling in more mbuf fields, before passing back to the application.
On TX, the packets are similarly post-processed before being handed
to the NIC for transmission.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The 'callbacks' member of the rte_eth_dev structure has been renamed
to 'link_intr_cbs' to make it clear that it refers to callbacks from
NIC interrupts. This allows us to add other types of callbacks to
the structure without ambiguity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch enables PF's internal switch by setting ALLOWLOOPBACK
flag when VEB is created. With this patch, traffic from PF can be
switched on the VEB.
Test report: http://www.dpdk.org/ml/archives/dev/2015-February/013237.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
In i40e_vsi_config_tc_queue_mapping, should add a flag to indicate
another valid setting by OR operation, but not set this flag to
valid_sections, otherwise it will overwrite the flags set before.
Test report: http://www.dpdk.org/ml/archives/dev/2015-February/013237.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
On XL710, performance number is far from the expectation on recent
firmware versions, if promiscuous mode is disabled, or promiscuous
mode is enabled and port MAC address is equal to the packet
destination MAC address. The fix for this issue may not be
integrated in the following firmware version. So the workaround in
software driver is needed. For XL710, it needs to modify the initial
values of 3 internal only registers, which are the same as X710.
Note that the values for X710 and XL710 registers could be different,
and the workaround can be removed when it is fixed in firmware in
the future.
Test report: http://www.dpdk.org/ml/archives/dev/2015-February/012749.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
While VFIO doesn't allow us to map complete BARs with MSI-X tables,
it does allow us to map around them in PAGE_SIZE granularity. There
might be adapters that provide their registers in the same BAR
but on a different page. For example, Intel's NVME adapter, though
not a network adapter, provides only one MMIO BAR that contains
the MSI-X table.
Signed-off-by: Dan Aloni <dan@kernelim.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch removes all references to RTE_MBUF_REFCNT, setting the refcnt
field in the mbuf struct permanently.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Currently for mbufs with refcnt, we cannot free mbufs with external memory
buffers (ie. vhost zero copy), as they are recognized as indirect
attached mbufs and therefore we free the direct mbuf it points to,
resulting in an error in the case of external memory buffers.
We solve the issue by introducing the IND_ATTACHED_MBUF flag, which indicates
that the mbuf is an indirect attached mbuf pointing to another mbuf.
When we free an mbuf, we only free the direct mbuf if the flag is set.
Freeing an mbuf with external buffer is the same as freeing a non attached mbuf.
The flag is set during attach and clear on detach.
So in the case of vhost zero copy where we have mbufs with external
buffers, by default we just free the mbuf and it is up to the user to deal with
the external buffer.
This patch would allow the removal of the RTE_MBUF_REFCNT config option,
setting refcnt for all mbufs permanently.
The patch also modifies the vhost example as it was using the
RTE_MBUF_INDIRECT macro to detect if it was an mbuf with external buffer.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch introduces CONFIG_RTE_KNI_PREEMPT_DEFAULT flag. When set to 'no',
KNI kernel thread(s) do not call schedule_timeout_interruptible(), which
improves overall KNI performance at the expense of CPU cycles (polling).
Default values is 'yes', maintaining the same behaviour as of now.
Signed-off-by: Marc Sune <marc.sune@bisdn.de>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Since rte_hash_crc() can now be run regardless of SSE4.2 support,
we can safely remove compile checks for RTE_MACHINE_CPUFLAG_SSE4_2
in test utilities.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Calculating hash for data of variable length is more efficient
when that data is sliced into 8-byte pieces. The rest part of data
is hashed using CRC32 functions with either 8 and 4 byte operands.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Initially, SSE4.2 support is detected via the constructor function.
Added rte_hash_crc_set_alg() function to detect and set CRC32
implementation if necessary. SSE4.2 is allowed by default.
rte_hash_crc_*byte() functions reworked so they choose available
CRC32 implementation in the runtime.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
SSE4.2 provides CRC32 intrinsic with 8-byte operand.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Give up using built-in intrinsics and use our own assembly
implementation. Remove #include entry as well.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Added:
- crc32c_sse42_u32() emits 'crc32l' asm instruction;
- crc32c_sse42_u64() emits 'crc32q' asm instruction;
- crc32c_sse42_u64_mimic(), wrapper in case of run on 32-bit platform.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add lookup tables for CRC32 algorithm, crc32c_1word() and
crc32c_2words() functions returning hash of 32-bit and 64-bit
operand.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Enhance csum fwd engine based on current TX checksum framework in order
to test TX Checksum offload for NVGRE packet.
It includes:
- IPv4 and IPv6 packet
- outer L3, inner L3 and L4 checksum offload for Tx side.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Extend the "tunnel_filter" command in testpmd to test the RX tunnel filter API for NVGRE packet.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
The filter types supported are listed below for NVGRE packet:
1. Inner MAC and Inner VLAN ID.
2. Inner MAC address, inner VLAN ID and tenant ID.
3. Inner MAC and tenant ID.
4. Inner MAC address.
5. Outer MAC address, tenant ID and inner MAC address.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add an Ethernet type definition for Transparent Ethernet Bridging.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
RSS offloads supported 'ip' and 'udp' only, which did not demonstrate
all of the hardware capabilities. The modifications adds support of
new RSS offloads of 'tcp', 'sctp', 'ether' and 'all'.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
RSS offload types were defined separately for 1/10G and 40G NICs,
and have no relationship with flow types. The modifications are to
unify all RSS offload types for all PMDs. Unified RSS offload types
have new and common names which can be used for any PMD or
applications, and decouple from specific hardwares.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with fm10k]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Flow types was defined actually for i40e hardware specifically,
and wasn't able to be used for defining RSS offload types of all
PMDs. It removed the enum flow types, and uses macros instead
with new names. The new macros can be used for defining RSS
offload types later. Also modifications are made in i40e and
testpmd accordingly.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with new flow director API]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It wrongly calculates the size of the flow type mask array. The fix
is to align the flow type maximum index ID with the number of
element bit width, and then divide the number of element bit width.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The old ethertype filter API was removed in commit 75db20648,
but was still in (newly integrated) version map for ABI.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Following structures are removed:
- rte_2tuple_filter
- rte_5tuple_filter
Following APIs are removed:
- rte_eth_dev_add_2tuple_filter
- rte_eth_dev_remove_2tuple_filter
- rte_eth_dev_get_2tuple_filter
- rte_eth_dev_add_5tuple_filter
- rte_eth_dev_remove_5tuple_filter
- rte_eth_dev_get_5tuple_filter
It also move macros TCP_*_FLAG to rte_eth_ctrl.h, and removes the macro
TCP_UGR_FLAG which is duplicated with TCP_URG_FLAG.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
[Thomas: remove also from version map]
