The header file fcntl.h should not be included from sys/ directory
as done in dlb drivers, it is an error with musl libc.
Fixes: 19980083fd ("event/dlb: add eventdev probe")
Fixes: 5433956d51 ("event/dlb2: add eventdev probe")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
The page size is often retrieved from the macro PAGE_SIZE.
If PAGE_SIZE is not defined, it is either using hard coded default,
or getting the system value from the UNIX-only function sysconf().
Such definitions are replaced with the generic function
rte_mem_page_size() defined for each supported OS.
Removing PAGE_SIZE definitions will fix dlb drivers for musl libc,
because #ifdef checks were missing, causing redefinition errors.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Boyer <aboyer@pensando.io>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Rename PKT_RX_EIP_CKSUM_BAD to PKT_RX_OUTER_IP_CKSUM_BAD and
deprecate the original name. The new name is better aligned
with existing PKT_RX_OUTER_* flags, which should help reduce
confusion about its use.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The rte_eventdev_pmd*.h files are for drivers only and should be private
to DPDK, and not installed for app use.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
Enhance Tx path cache locality, remove current tag type and group
stores from datapath to conserve store buffers.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The `data_sz` name is fine, but it looks out of place because nothing
else has "data" prefix in that structure. Rename it to "size", as well
as add more clarity to the comments around each struct member.
Fixes: 6a17919b0e ("eal: change power intrinsics API")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
As announced in the deprecation note, remove all compatibility build
defines from previous make/meson versions and use only the standardized
ones - RTE_LIB_<name> for libraries, and RTE_<CLASS>_<NAME> for drivers.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
CN98xx SoC comes up with two CPT blocks wrt
CN96xx, CN93xx, to achieve higher performance.
Adding support to allocate all LFs of VF with even BDF from CPT0
and all LFs of VF with odd BDF from CPT1.
If LFs are not available in one block then they will be allocated
from alternate block.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Instead of passing around pointers and integers, collect everything
into struct. This makes API design around these intrinsics much easier.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Unlinking queues from port should be done during port release. Doing it
during device re-configuration could result in segfault as ports array
is re-allocated based on new number of ports.
Fixes: f7ac8b66b2 ("event/octeontx2: support linking queues to ports")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Fix unconditional Tx flush, in case of Tx only we need to check if
work slot is non-empty before issuing flush.
Also, in packet retransmit cases added check for the reference
count and flush the work slot only for the last packet.
Fixes: cb7ee83b63 ("event/octeontx2: improve single flow performance")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Since selftest now depends on dynamic mbuf fields it is not
feasible to run selftest on device probe.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Since selftest now depends on dynamic mbuf fields it is not
feasible to run selftest on device probe.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reasons for building not supported generally start with lowercase
because printed as the second part of a line.
Other changes:
- "linux" should be "Linux" with a capital letter.
- ARCH_X86_64 may be simply x86_64.
- aarch64 is preferred over arm64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Use rte_pci_find_ext_capability instead of private version,
Remove unused PCI offsets and values
Use PCI definitions from rte_pci.h, where available.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Add missing returns so that the memzone free is not called if
port create is successful.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Mike Ximing Chen <mike.ximing.chen@intel.com>
Use rte_pci_find_ext_capability instead of private version,
Remove unused PCI offsets and values
Use PCI definitions from rte_pci.h, where available.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
The code contained in this commit was inadvertently omitted
when dissecting the dlb2 code base into discrete patches for
upstream.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Mike Ximing Chen <mike.ximing.chen@intel.com>
The drivers for OCTEON TX2 are not supported in 32-bit mode.
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
These entry points are NO-OPS. DLB does not support
reconfiguring individual queues or ports. The entire device
must be reconfigured.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add a variety of self-tests for both ldb and directed
ports/queues, as well as configure, start, stop, link, etc...
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The PMD uses a public interface to allow applications to
control the token pop mode. Supported token pop modes are
as follows, and they impact core scheduling affinity for
ldb ports.
AUTO_POP: Pop the CQ tokens immediately after dequeueing.
DELAYED_POP: Pop CQ tokens after (dequeue_depth - 1) events
are released. Supported on load-balanced ports
only.
DEFERRED_POP: Pop the CQ tokens during next dequeue operation.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for eventdev stop and close entry points.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for dequeue, dequeue_burst, ...
DLB does not currently support interrupts, but instead uses
umonitor/umwait if supported by the processor. This allows
the software to monitor and wait on writes to a cache-line.
DLB supports normal and sparse cq mode. In normal mode the
hardware will pack 4 QEs into each cache line. In sparse cq
mode, the hardware will only populate one QE per cache line.
Software must be aware of the cq mode, and take the appropriate
actions, based on the mode.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for the eventdev start entry point.
DLB delays setting up single link resources until
eventdev start, because it is only then that it can
ascertain which ports have just one linked queue.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add supports for the port unlink(s) eventdev entry points.
The unlink operation is an asynchronous operation executed by
a control thread, and the unlinks-in-progress function reads
a counter shared with the control thread. Port QE and memzone
memory is freed here.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add port link entry point. Directed queues are identified and created
at this stage. Their setup deferred until link-time, at which
point we know the directed port ID. Directed queue setup
will only fail if this queue is already setup or there are
no directed queues left to configure.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Configure the load balanced (ldb) or directed (dir) port.
The consumer queue (CQ) and producer port (PP) are also
set up here.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Load balanced (ldb) queues are setup here.
Directed queues are not set up until link time, at which
point we know the directed port ID. Directed queue setup
will only fail if this queue is already setup or there are
no directed queues left to configure.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for getting the queue and port default configuration.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for configuring the DLB hardware.
In particular, this patch configures the DLB
hardware's scheduling domain, such that it is provisioned with
the requested number of ports and queues, provided sufficient
resources are available. Individual queues and ports are
configured later in port setup and eventdev start.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
This commit adds probe-time low level hardware
initialization. It also adds probe-time init for both
primary and secondary DPDK processes.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
This commit introduces the flexible interface. This
interface allows the core code to operate in PF mode (direct
hardware access) or bifurcated mode (hardware configured via
kernel driver). This driver currently only supports PF modei,
but bifurcated mode will be added in a future patch-set.
Note that the flexible interface is not used for data path
operations, and thus there are no performance concerns
related to the use of function pointers.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add the eventdev portion of probe, and parse command line
options, but do not initialize hardware.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add miscellaneous inline functions that may be called
from multiple files. These functions include inline
assembly of new x86 instructions, such as movdir64b,
since they are not available as builtin functions in
the minimum supported GCC version.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add headers containing structs and constants shared between
the PMD and the shared code. The term shared code refers to
the code that implements the hardware interface. The shared code
is introduced in the probe patch, and then is extended as
additional eventdev PMD entry points are added to the patchset.
In the case of the bifurcated PMD (to be introduced in the
future), the shared code is contained in the Linux kernel
module itself.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add headers used internally by the PMD. They include constants,
macros for device resources, structure definitions for hardware interfaces
and software state, and various forward-declarations.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
This commit adds base support for dynamic logging.
The default log level is NOTICE. Dynamic logging
is used exclusively throughout this patchset.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Note that config/rte_config.h contains several configuration
switches, providing for fine control of the PMD's
runtime behaviour.
The meson infrastructure is expanded as additional files are
added to this patchset.
Adds announcement of availability of the new driver
for Intel Dynamic Load Balancer 1.0 hardware.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
