Add a note for the preference of using "()" rather than "\" for line
continuations in Meson.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Some docs and comments in Meson files are still mentioning
the old build system based on "make", removed in 20.11.
After one year, such references are better to be removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The release notes comments mention how to generate the documentation
with the old & removed build system.
Rather than fixing these comments, all old release notes comments
are removed, because they are useful only for the current release.
Few extra blank lines are removed for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add ROC API to configure dual VLAN tag addition and removal.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Copy threshold has been introduced in async vhost data
path to select the appropriate copy engine to do copies
for higher efficiency.
However, it may cause packets ordering issues and also
introduces performance unpredictability.
Therefore, this patch removes copy threshold support in
async vhost data path.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
New API for these were added in 20.11 and the old API was retained
but marked deprecated. Since 21.11 is the next LTS, it is time
to remove the deprecated ones.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Adding more information about the release milestones.
This includes the scope of change, expectations, etc.
Signed-off-by: Asaf Penso <asafp@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The documentation for the bond driver lists the name as `net/bond`
however the driver should be `net/bonding`.
Fixes: 89c67ae2cba7 ("doc: remove references to make from prog guide")
Cc: stable@dpdk.org
Signed-off-by: Ben Magistro <koncept1@gmail.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
This patch adds multi-process support for testpmd.
For example the following commands run two testpmd
processes:
* the primary process:
./dpdk-testpmd --proc-type=auto -l 0-1 -- -i \
--rxq=4 --txq=4 --num-procs=2 --proc-id=0
* the secondary process:
./dpdk-testpmd --proc-type=auto -l 2-3 -- -i \
--rxq=4 --txq=4 --num-procs=2 --proc-id=1
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Make number of flows in flowgen configurable by setting parameter
--flowgen-flows=N.
Signed-off-by: Zhihong Wang <wangzhihong.wzh@bytedance.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch add PDCP security short MAC-I support for
dpaa_sec driver.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch add support to handle PDCP short MAC-I domain
along with standard control and data domains as it has to
be treaty as special case with PDCP protocol offload support.
ShortMAC-I is the 16 least significant bits of calculated MAC-I. Usually
when a RRC message is exchanged between UE and eNodeB it is integrity &
ciphered protected.
MAC-I = f(key, varShortMAC-I, count, bearer, direction).
Here varShortMAC-I is prepared by using (current cellId, pci of source cell
and C-RNTI of old cell). Other parameters like count, bearer and
direction set to all 1.
crypto-perf app is updated to take short MAC as input mode.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch adds support for AES_CMAC integrity
in non-security mode.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
add DES-CBC support and enable available cipher-only
test cases.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The rte_cryptodev_pmd.* files are for drivers only and should be
private to DPDK, and not installed for app use.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The API rte_cryptodev_pmd_is_valid_dev, can be used
by the application as well as PMD to check whether
the device is valid or not. Hence, _pmd is removed
from the API.
The applications and drivers which use this API are
also updated.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When parsing a devargs, try to parse using the global device syntax
first. Fallback on legacy syntax on error.
Example of new global device syntax:
-a bus=pci,addr=82:00.0/class=eth/driver=mlx5,dv_flow_en=1
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Gaetan Rivet <grive@u256.net>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The structures rte_cryptodev_sym_session and
rte_cryptodev_asym_session are not used by the
application directly. The application just need
an opaque pointer which it can attach to rte_crypto_op
while enqueue.
Hence, these structures can be internal to library
hidden from the user.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Transfer flow rules may be applied to traffic entering switch from
many sources. There are flow API pattern items which allow to specify
ingress port match criteria explicitly, but it is not documented
if ethdev port used to create flow rule adds any implicit match
criteria and how it coexists with explicit ones.
These aspects should be documented and drivers and applications
which use it in a different way must be fixed.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
By its very name, action PORT_ID means that packets hit an ethdev with the
given DPDK port ID. At least the current comments don't state the opposite.
However some drivers implement it in a different way and direct traffic to
the opposite end of the "wire" plugged to the given ethdev. For example in
the case of a VF representor traffic is redirected to the corresponding VF
itself rather than to the representor ethdev and OvS uses PORT_ID action
this way.
The documentation must be clarified and, likely, rte_flow_action_port_id
structure should be extended to support both meanings.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Currently there is a dedicated modify action for each
packet field that the application wants to change.
For example:
RTE_FLOW_ACTION_TYPE_SET_IPV4_DST to modify destination of IPv4.
A new action RTE_FLOW_ACTION_TYPE_MODIFY_FIELD added the ability
to use the same action to modify any field, in addition to be able to
modify the value based on different field and not just immediate value.
Signed-off-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In the current implementation,
the action rte_flow_action_modify_field is not well defined
for fields larger than 64 bits (for example IPv6 source)
In addition, the byte order is also not well defined.
Both of those issue should be fixed.
Signed-off-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Jerin Jacob <jerinj@marvell.com>
To support shared Rx queue, this patch announces new offload flag
RTE_ETH_RX_OFFLOAD_SHARED_RXQ and new shared_group field to struct
rte_eth_rxconf in DPDK v21.11.
[1] mail list discussion:
https://mails.dpdk.org/archives/dev/2021-July/215575.html
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch announces the renaming of struct
vhost_device_ops to rte_vhost_device_ops in DPDK v21.11.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Marvin Liu <yong.liu@intel.com>
This patch announces the marking of all the vDPA driver APIs
as internal.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Marvin Liu <yong.liu@intel.com>
This patch announces the experimental tag removal of 10 vhost APIs,
which have been experimental for more than 2 years.
All APIs could be made stable in DPDK 21.11.
Signed-off-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Marvin Liu <yong.liu@intel.com>
IPsec xform struct would be updated to include IPsec SA lifetime
configuration. The existing member 'esn_soft_limit' would only track
ESN. And as sequence number control is getting introduced,
'esn_soft_limit' may not indicate the number of packets processed.
Replace that with a new structure to cover all lifetime cases with
support for specifying both soft and hard lifetimes.
ESN control introduced by https://patches.dpdk.org/patch/95808/
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The structure rte_security_session is not directly used
by the application. The application just need an opaque
pointer to attached to the mbuf or rte_crypto_op while
enqueue. Hence, it can be hidden inside the library
and would prevent unnecessary indirection to the priv
session data in fastpath.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The current crypto raw data vectors need to be extended to support
out of place processing. It is proposed to add additional desl_sgl
to provide details for destination sgl.
The same is also extended to support rte_security usecases, where
we need total data length to know how much additional memory space
is available in buffer other than data length so that driver/HW
can write expanded size data after encryption.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In crypto adapter metadata, first 8 bytes of request info is a space
holder for response info. For better clarity, reserved field should be
removed from request info. New space for response info can be made by
changing type of event crypto metadata to structure from union.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Lcore state FINISHED is used by the worker thread to indicate that
it has completed the assigned task. The state is changed to
WAIT by another thread after it observes the updated state. This
additional step is redundant. After this deprecation, the worker
thread will update the state to WAIT.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Feifei Wang <feifei.wang2@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
A bug with segmented packets has been discovered but the agreement
to apply the fix is not concluded at the time of DPDK 21.08 release.
This bug seems to be in DPDK for many years and should be fixed in 21.11.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Make driver layer as internal, remove unnecessary rte_ prefix for
structures and functions that are not a part of public API.
Promote experimental trace and vector APIs to stable.
Add reserved field to `rte_event_timer` structure.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
One reserved byte in rte_crypto_op struct would be used to indicate
warnings and other information from the crypto/security operation. This
field will be used to communicate events such as soft expiry with IPsec
in lookaside mode.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The APIs which are internal to PMD and cryptodev library
can be marked as internal so that ABI checking do not
shout for changes in interfaces which are internal to DPDK.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Announce changes to add 2 unions.
The first union will provide integral and bits access to version and IHL.
The second union will provide integral and bits access to fragment flags
and offset.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Moving struct rte_intr_handle as an internal structure to
avoid any ABI breakages in future. Since this structure defines
some static arrays and changing respective macros breaks the ABI.
Eg:
Currently RTE_MAX_RXTX_INTR_VEC_ID imposes a limit of maximum 512
MSI-X interrupts that can be defined for a PCI device, while PCI
specification allows maximum 2048 MSI-X interrupts that can be used.
If some PCI device requires more than 512 vectors, either change the
RTE_MAX_RXTX_INTR_VEC_ID limit or dynamically allocate based on
PCI device MSI-X size on probe time. Either way its an ABI breakage.
Discussion thread:
https://mails.dpdk.org/archives/dev/2021-March/202959.html
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>