Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro to make things shorter and more comprehensible. For
both meson and make builds, keep the old macro around for backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
pcap has historically shipped a custom pcap-config binary tool which
does the job of pkg-config. It was never compatible with cross
compilation.
Meson uses it when using dependency(), which then means cross
compilation fails.
Set pcap-config to empty in the meson cross compilation files so
that Meson will not use it, and add a fallback in case
dependency() fails.
libpcap 1.9.0 finally ships a pkg-config file so everything will
work out of the box in the future.
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
Private vdev was the way previously, when pdump developed, now with
shared device mode on virtual devices, pcap data path in secondary
is not working.
When secondary adds a virtual device, related data transferred to
primary and primary creates the device and shares device back with
secondary. When pcap device created in primary, pcap handlers
(pointers) are process local and they are not valid for secondary
process. This breaks secondary.
So we can't directly share the pcap handlers, but need to create a new
set of handlers for secondary, that's what we done in this patch.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This is prework for data path enabling for secondary process.
To prevent pcap handler opened by one process be overwritten by
another process, each process should have their private copy,
`rte_eth_dev->process_private` is exactly what we needed.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
After previous changes, the function rte_eth_dev_release_port()
can be used for primary or secondary process as well.
The only difference with rte_eth_dev_release_port_secondary()
is the shared lock used in rte_eth_dev_release_port().
The function rte_eth_dev_release_port_secondary() was recently
added in 18.11 cycle.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Attach port from secondary should ignore devargs since the private
device is not necessary to support. Also previously, detach port on
a secondary process will mess primary process and cause the same
device can't be attached back again. A secondary process should use
rte_eth_dev_release_port_secondary to release a port.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
At the moment, PCAP interfaces use dummy MAC by default. This change
adds support for selecting PCAP physical interface MAC with phy_mac=1
devarg. This allows to setup packet flows using the physical interface
MAC.
Signed-off-by: Juhamatti Kuusisaari <juhamatti.kuusisaari@coriant.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The MAC addresses are generated in a similar manner as in the TAP PMD,
where the address is based on the number of PCAP ports created.
This is useful for the purposes of debugging DPDK applications using
PCAP devices instead of real devices where multiple devices should still
have unique MAC addresses. This method was chosen over randomly
assigning MAC addresses to make the creation of pcaps, specifically
matching the destination ethernet address field to an interface, easier.
Signed-off-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Calling rte_eth_dev_info_get() on secondary process cause a crash
because eth_dev->device is not set properly.
Fixes: ee27edbe0c ("drivers/net: share vdev data to secondary process")
Cc: stable@dpdk.org
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Set the rx and tx queue state appropriately when the queues or device are
started or stopped. This enables usage of the ethdev rx/tx queue start/stop
functions with the PCAP PMD.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Support rx of in direction packets only
Useful for apps that also tx to eth_pcap ports in order to not see them
echoed back in as rx when out direction is also captured
Example:
In case using rx_iface and sending *single* packet to eth1
it will loop forever as the when it is sent to tx_iface=eth1
it will be captured again on the rx_iface=eth1 and so on
$RTE_TARGET/app/testpmd l 0-3 -n 4 \
--vdev 'net_pcap0,rx_iface=eth1,tx_iface=eth1'
…
---------------------- Forward statistics for port 0 ------------
RX-packets: 758 RX-dropped: 0 RX-total: 758
TX-packets: 758 TX-dropped: 0 TX-total: 758
------------------------------------------------------------------
While if using rx_iface_in it will not be captured on the way out and
be forwarded only once
$RTE_TARGET/app/testpmd l 0-3 -n 4 \
--vdev 'net_pcap0,rx_iface_in=eth1,tx_iface=eth1'
…
---------------------- Forward statistics for port 0 ------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
------------------------------------------------------------------
Signed-off-by: Ido Goshen <ido@cgstowernetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change open_rx/tx_pcap/iface functions to open only a single pcap/dumper
and not loop num_of_queue times
The num_of_queue loop is already achieved by the
caller rte_kvargs_process
Fixing:
1. Opens N requested pcaps/dumpers instead of N^2
2. Leak of pcap/dumper's which are being overwritten by
the sequential calls to open_rx/tx_pcap/iface functions
3. Use the filename/iface args per queue and not just the last one
that overwrites the previous names
Fixes: 4c173302c3 ("pcap: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Ido Goshen <ido@cgstowernetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
A new hook function is added and called inside the PMDs at the end
of the device probing:
- in primary process, after allocating, init and config
- in secondary process, after attaching and local init
This new function is almost empty for now.
It will be used later to add some post-initialization processing.
For the PMDs calling the helpers rte_eth_dev_create() or
rte_eth_dev_pci_generic_probe(), the hook rte_eth_dev_probing_finish()
is called from here, and not in the PMD itself.
Note that the helper rte_eth_dev_create() could be used more,
especially for vdevs, avoiding some code duplication in PMDs.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
These drivers never attempt link speed negotiation. Change link_autoneg
value to ETH_LINK_FIXED to be more accurate and consistent between PMDs.
Fixes: 1e3a958f40 ("ethdev: fix link autonegotiation value")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
dpdk-procinfo, as a secondary process, cannot fetch stats for vdev.
This patch enables that by attaching the port from the shared data.
We also fill the eth dev ops, with only some ops works in secondary
process, for example, stats_get().
Note that, we still cannot Rx/Tx packets on the ports which do not
support multi-process.
Reported-by: Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
We introduced private rte_eth_dev_data to allow vdev to be created
both in primary process and secondary process(es). This is not
friendly to multi-process model, for example, it leads to port id
contention issue if two processes both find the data entry is free.
And to get stats of primary vdev in secondary, we must allocate
from the pre-defined array so that we can find it.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Rather than trying to use meson's build-in detection for libpcap, and
having to special-case cross-building, just check for the presence of
pcap.h and the pcap library.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The detection of pcap as a dependency involves invoking pcap-config to get
parameters - something not possible in a cross-compilation environment.
Therefore we need to just look for the presence of the library in a
cross-compilation environment and assume if the library is present we can
compile and link against it.
Fixes: efd5d1a8d8 ("drivers/net: build some vdev PMDs with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add the af_packet, null, pcap and ring PMDs to the meson build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
On single NUMA device the log information shows as boundary value
instead of -1. The change brings in unsigned to signed.
Fixes: 4c173302c3 ("pcap: add new driver")
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
There are 3 kind of link data in ethdev:
- capabilities (rte_eth_dev_info)
- configuration (rte_eth_conf)
- status (rte_eth_link)
A bit-field is used for capabilities (rte_eth_dev_info.speed_capa) and
configuration (rte_eth_conf.link_speeds).
Bits are defined in ETH_LINK_SPEED_*.
Some numerical (ETH_SPEED_NUM_*) and boolean (ETH_LINK_*) values
are used for the link status (rte_eth_link.*).
There was a mistake in the comment of rte_eth_link.link_autoneg,
suggesting ETH_LINK_SPEED_[AUTONEG/FIXED] which are 0/1,
instead of ETH_LINK_[AUTONEG/FIXED] which are 1/0.
The drivers are fixed to use ETH_LINK_[AUTONEG/FIXED].
Fixes: 82113036e4 ("ethdev: redesign link speed config")
Suggested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
In open_single_tx_pcap there is a call to pcap_open_dead which calls
malloc to create and return a pcap_t. That object is never freed in
this case. Other places it is freed by passing it back similar to the
way the pcap_dumper_t is in this case.
The pcap_t is only used to create the pcap_dumper_t and is never used
again so freeing it here is safe and much simpler than trying to pass
it back to be freed in eth_dev_stop along with the other
pcap_t/pcap_dumper_t objects.
Fixes: 4c173302c3 ("pcap: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Stefan Baranoff <sbaranoff@gmail.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This is a preparation to embed the generic rte_device into the rte_eth_dev
also for virtual devices.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Some virtual pmds report a different name than the vdev driver name
registered in eal.
While it does not hurt, let's try to be consistent.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since commit b1fb53a39d ("ethdev: remove some PCI specific handling"),
rte_eth_dev_info_get() relies on dev->data->drv_name to report the driver
name to caller.
Having the pmds set driver_info->driver_name in the pmds is useless,
since ethdev overwrites it right after.
The only thing the pmd must do is:
- for pci drivers, call rte_eth_copy_pci_info() which then sets
data->drv_name
- for vdev drivers, manually set data->drv_name
At this stage, virtio-user does not properly report a driver name (fixed in
next commit).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Jan Blunck <jblunck@infradead.org>
Since rte_eth_dev_info_get does memset() on dev_info before
calling device specific code, the explicit assignment of NULL
in all these virtual drivers has no effect.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
This registers the legacy names of the driver being renamed in
commit 2f45703c17 ("drivers: make driver names consistent").
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
