Added API function for LPM IPv4 and IPv6 to query for the existence
of a rule/route and return the next hop ID associated with the route
if route is present.
This is used by the Packet Framework LPM table for implementing a
routing table.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Added zero-size field (offset in data structure) to specify the beginning
of packet meta-data in the packet buffer just after the mbuf.
The size of the packet meta-data is application specific and the packet
meta-data is managed by the application.
The packet meta-data should always be accessed through the provided macros.
This is used by the Packet Framework libraries (port, table, pipeline).
There is absolutely no performance impact due to this mbuf field, as it
does not take any space in the mbuf structure (zero-size field).
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
RTE_LOGTYPE_CONFIG, RTE_LOGTYPE_DATA and RTE_LOGTYPE_PORT are renamed
by adding VHOST prefix.
It prevents from conflict with new RTE_LOGTYPE_PORT of packet framework.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch adds following ixgbe NIC filters implement:
syn filter, ethertype filter, 5tuple filter for intel NIC 82599
Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch adds following igb NIC filters implement:
syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350
syn filter, ethertype filter, 5tuple filter for intel NIC 82576
Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch adds APIs for NIC filters list below:
ethertype filter, syn filter, 2tuple filter, flex filter, 5tuple filter
Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
New stuff:
* Support for regular traffic as well as IPv4 and IPv6
* Simplified config
* Routing table printed out on start
* Uses LPM/LPM6 for lookup
* Unmatched traffic is sent to the originating port
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Mostly a copy-paste of IPv4, with a few caveats.
Only supported packets are those in which fragment extension header is
just after the IPv6 header.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
New stuff:
* Support for regular traffic as well as IPv4 and IPv6
* Simplified config
* Routing table printed out on start
* Uses LPM/LPM6 for lookup
* Unmatched traffic is sent to the originating port
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Technically, fragmentation table can work for both IPv4 and IPv6
packets, so we're renaming everything to be generic enough to make sense
in IPv6 context.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Moved out debug log macros into common, as reassembly code will later
need them as well.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Issues were reported by checkpatch.pl.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Renaming the igb_uio_bind script to dpdk_nic_bind to have a generic name
before supporting two drivers.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Removing PCI ID list to make igb_uio more similar to a generic driver
like vfio-pci or pci_uio_generic. This is done to make it easier for
the binding script to support multiple drivers.
Note that since igb_uio no longer has a PCI ID list, it can now be
bound to any device, not just those explicitly supported by DPDK. In
other words, it now behaves similar to PCI stub, VFIO and other generic
PCI drivers.
Therefore to bind a new device to igb_uio, the user will now have to
first write its PCI ID to "new_id" file inside the igb_uio driver
directory, and only then write the PCI ID to "bind". This is reflected
in changes to PCI binding script as well.
There's a weird behaviour of sysfs when a new device ID is added to
new_id. Subsequent writing to "bind" will result in IOError on
closing the file. This error is harmless but it triggers the
exception anyway, so in order to work around that, we check if the
device was actually bound to the driver before raising an error.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Unlike igb_uio, VFIO interrupt type is not set by kernel module
parameters but is set up via ioctl() calls at runtime. This warrants
a new EAL command-line parameter. It will have no effect if VFIO is
not compiled, but will set VFIO interrupt type to either "legacy", "msi"
or "msix" if VFIO support is compiled. Note that VFIO initialization
will fail if the interrupt type selected is not supported by the system.
If the interrupt type parameter wasn't specified, VFIO will try all
interrupt types (starting with MSI-X).
In unit tests, we don't know if VFIO is compiled (eal_vfio.h header is
internal to Linuxapp EAL), so we check this flag regardless.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add support for binding VFIO devices if RTE_PCI_DRV_NEED_MAPPING is set
for this driver. Try VFIO first, if not mapped then try IGB_UIO too.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Since VFIO cannot be used to map the same device twice, secondary
processes receive the device/group fd's by means of communicating over a
local socket. Only group and container fd's should be sent, as device
fd's can be obtained via ioctl() calls' on the group fd.
For multiprocess, VFIO distinguishes between existing but unused groups
(e.g. grups that aren't bound to VFIO driver) and non-existing groups in
order to know if the secondary process requests a valid group, or if
secondary process requests something that doesn't exist.
VFIO multiprocess sync communicates over a simple protocol. It defines
two requests - request for group fd, and request for container fd.
Possible replies are: SOCKET_OK (an OK signal), SOCKET_ERR (error
signal) and SOCKET_NO_FD (a signal that indicates that the requested
VFIO group is valid, but no fd is present for that group - indicating
that the respective group is simply not bound to VFIO driver).
Here is the logic in a nutshell:
1. secondary process sends SOCKET_REQ_CONTAINER or SOCKET_REQ_GROUP
1a. in case of SOCKET_REQ_GROUP, client also then sends group number
2. primary process receives message
2a. in case of invalid group, SOCKET_ERR is sent back to secondary
2b. in case of unbound group, SOCKET_NO_FD is sent back to secondary
2c. in case of valid group, SOCKET_OK is sent and followed by fd
3. socket is closed
in case of any error, socket is closed and SOCKET_ERR is sent.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Adding code to support VFIO mapping (primary processes only). Most of
the things are done via ioctl() calls on either /dev/vfio/vfio (the
container) or a /dev/vfio/$GROUP_NR (IOMMU group).
In a nutshell, the code does the following:
1. creates a VFIO container (an entity that allows sharing IOMMU DMA
mappings between devices)
2. checks if a given PCI device is a member of an IOMMU group (if it's
not, this indicates that the device isn't bound to VFIO)
3. calls open() the group file to obtain a group fd
4. checks if the group is viable (that is, if all the devices in the
same IOMMU group are either bound to VFIO or not bound to anything)
5. adds the group to a container
6. sets up DMA mappings (only done once, mapping whole DPDK hugepage
memory for DMA, with a 1:1 correspondence of IOVA to PA)
7. gets the actual PCI device fd from the group fd (can fail, which
simply means that this particular device is not bound to VFIO)
8. maps BARs (MSI-X BAR cannot be mmaped, so skipping it)
9. sets up interrupt structures (but not enables them!)
10. enables PCI bus mastering
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Creating code to handle VFIO interrupts in EAL interrupts (supports all
types of interrupts).
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add VFIO compilation option to linuxapp config.
Adding a header that will determine if VFIO support should be compiled
in. If VFIO is enabled in config (and it's enabled by default), then the
header will also check for kernel version. If VFIO is enabled in config
and if the kernel version is 3.6+, then VFIO_PRESENT will be defined.
This is the macro that should be used to determine if VFIO support is
being compiled in.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Moving interrupt type enum out of igb_uio and renaming it to be more
generic. Such a strange header naming and separation is done mostly to
make coming virtio patches easier to port to dpdk.org tree.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Currently, igb_uio is always compiled. Some Linux distributions may not
want to include igb_uio with DPDK, so we need to make sure that igb_uio
compilation for Linuxapp targets can be optional.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Rename the RTE_PCI_DRV_NEED_IGB_UIO to be more generic.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Currently, EAL does not distinguish between actual failures and expected
initialization errors. E.g. sometimes the driver fails to initialize
because it was not supposed to be initialized in the first place, such
as device not being managed by said driver.
This patch makes EAL fail on actual initialization errors while still
skipping over expected initialization errors.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Separating mapping code and calls to open. This is a preparatory work
for VFIO patch since it'll need to map BARs too but it doesn't use path
in mapped_pci_resource. Also, renaming structs to be more generic.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This makes it possible to run DPDK without hugepage memory when VFIO
is used, as VFIO uses virtual addresses to set up DMA mappings.
Technically, malloc is just fine, but we want to guarantee that
memory will be page-aligned, so using mmap to be safe.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
eal_hpet.c was renamed to eal_timer.c and, thanks to code changes, does
not need the -Wno-return-type any more.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
New file containing optimized receive and transmit functions which
use 128bit vector instructions to improve performance. When conditions
permit, these functions will be enabled at runtime by the device
initialization routines already in the PMD.
The compilation of the vectorized RX and TX code paths is controlled by
a new setting in the build time configuration for the IXGBE driver. Also
added is a setting which allows an optional further performance increase
by disabling the use of the olflags field on packet RX.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: XiaonanX Zhang <xiaonanx.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: code-style adjustments]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Demonstrates the use of the ACL library in the DPDK application to
implement packet classification and L3 forwarding.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
[Thomas: some code-style changes]
Usage example and main test application for the ACL library.
Provides IPv4/IPv6 5-tuple classification.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
[Thomas: some code-style changes]
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
The ACL library is used to perform an N-tuple search over a set of rules with
multiple categories and find the best match for each category.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
[Thomas: some code-style changes]
This fixes style problems reported by checkpatch including:
* extra whitespace
* spaces before tabs
* strings broken across lines
* excessively long lines
* missing spaces after keywords
* unnecessary paren's in return statements
Signed-off-by: Stephen Hemminger <shemming@brocade.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Add a set of unit tests and some basic performance test for the
distributor library. These tests cover all the major functionality of
the library on both distributor and worker sides.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
This adds the code for a new Intel DPDK library for packet distribution.
The distributor is a component which is designed to pass packets
one-at-a-time to workers, with dynamic load balancing. Using the RSS
field in the mbuf as a tag, the distributor tracks what packet tag is
being processed by what worker and then ensures that no two packets with
the same tag are in-flight simultaneously. Once a tag is not in-flight,
then the next packet with that tag will be sent to the next available
core.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: add doxygen @file comment]
