Change loop counter that should be based on the number
of rx queues, not tx queues. This only affects debug
output.
Fixes: 727b3fe292 ("net/ark: integrate PMD")
Cc: stable@dpdk.org
Signed-off-by: John Miller <john.miller@atomicrules.com>
During a link down event of a port participating in a LACP 802.3ad
bond the current behavior can cause all ports to be deselected
and temporarily stop all traffic on the bond, causing unexpected
traffic loss across all ports and not just the port which was
affected by the link down event.
Fixes: 46fb436836 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
The compilation with gcc-6.3.0 and EXTRA_CFLAGS=-Og gives the following
error:
CC virtio_rxtx.o
virtio_rxtx.c: In function ‘virtio_rx_offload’:
virtio_rxtx.c:680:10: error: ‘csum’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
csum = ~csum;
~~~~~^~~~~~~
The function rte_raw_cksum_mbuf() may indeed return an error, and
in this case, csum won't be initialized. Fix it by initializing csum
to 0.
Fixes: 96cb671193 ("net/virtio: support Rx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add operations that are safe for secondary processes:
* (x)stats
* device info get
* rx/tx descriptor status
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
PMD uses Verbs object which were not available in the shared memory.
This patch modify the location where Verbs objects are allocated (from
process memory address space to shared memory address space) and thus
allow a secondary process to use those object by mapping this shared
memory space its own memory space.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Use a unix socket to get back the communication channel with the Kernel
driver from the primary process, this is necessary to remap those pages
in the secondary process memory space and thus use the same Tx queues.
This is only supported from rdma-core (v15).
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
rte_eth_dev created by primary process were not available in secondary
process, it was not possible to use the primary process local memory
object from a secondary process.
This patch modify the reference of primary rte_eth_dev object, use
local rte_eth_dev secondary process instead.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
We need to set vf mac from the host, so that they will be in sync on the
guest and the host. Otherwise, we'll have a random mac on the guest, and
a 00:00:00:00:00:00 mac on the host.
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Here we're adding an example of setting up a policy, and allowing the
vm_cli_guest app to send it to the host using the cli command
"send_policy now"
Signed-off-by: Nemanja Marjanovic <nemanja.marjanovic@intel.com>
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Adding new wrapper function to existing private (but unused 'till now)
function with an rte_power_ prefix.
The plan is to clean up all the header files in the next release so
that only the intended public functions are in the map file and only
the relevant headers have the rte_ prefix so that only they are
included in the documentation.
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
We need to initialise the port's we're monitoring to be able to see
the throughput.
Signed-off-by: Nemanja Marjanovic <nemanja.marjanovic@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Need a way to convert a VF id to a PF id on the host so as to query the
PF for relevant statistics which are used for the frequency changes in
the vm_power_manager app.
Used when profiles are passed down from the guest to the host, allowing
the host to map the VFs to PFs.
Signed-off-by: Nemanja Marjanovic <nemanja.marjanovic@intel.com>
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Bus scan is responsible for finding devices over *all* buses.
Some of these buses might not be able to scan but that should
not prevent other buses to be scanned.
Same is the case for probing. It is possible that some devices which
were scanned didn't have a specific driver. That should not prevent
other buses from being probed.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
64bit load and store will be an atomic operation on all the
64bit processors.
Change RTE_ARCH_X86_64 to RTE_ARCH_64 to reflect the case.
Fixes: 9b15ba895b ("timer: use a skip list")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The rte_timer_reset function should be able to register timers on service
lcores as they are EAL threads.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This function can be used to check the role of a specific lcore.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
GCC does have the __get_cpuid_count builtin which checks for maximum
supported leaf, but implementations differ between CLANG and GCC.
This change provides an implementation compatible with both GCC and
CLANG 3.4+.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When compiling with clang extra warning flags, such as used by default with
meson, a warning is given in iotlb.c:
lib/librte_vhost/iotlb.c:318:6: warning:
variable 'socket' is used uninitialized whenever
'if' condition is false [-Wsometimes-uninitialized]
This is a false positive, as the socket value will be initialized by the
call to get_mempolicy in the case where the NUMA build-time flag is set,
and in cases where it is not set, "if (ret)" will always be true as ret is
initialized to -1 and never changed.
However, this is not immediately obvious, and is perhaps a little fragile,
as it will break if other code using ret is subsequently added above the
call to get_mempolicy by someone unaware of this subtle dependency.
Therefore, we can fix the warning and making the code more robust by
explicitly initializing socket to zero, and moving the extra condition
check on the return from get_mempolicy() into the #ifdef
Fixes: d012d1f293 ("vhost: add IOTLB helper functions")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add unit tests for rte_event_eth_rx_adapter_xxx() APIs
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The adapter implementation uses eventdev PMDs to configure the packet
transfer if HW support is available and if not, it uses an EAL service
function that reads packets from ethernet Rx queues and injects these
as events into the event device.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add RTE_EVENT_TYPE_ETH_RX_ADAPTER event type. Certain platforms (e.g.,
octeontx), in the event dequeue function, need to identify events
injected from ethernet hardware into eventdev so that DPDK mbuf can be
populated from the HW descriptor.
Events injected from ethernet hardware would use an event type of
RTE_EVENT_TYPE_ETHDEV and events injected from the rx adapter service
function would use an event type of RTE_EVENT_TYPE_ETH_RX_ADAPTER to
help the event dequeue function differentiate between these two event
sources.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add common APIs for configuring packet transfer from ethernet Rx
queues to event devices across HW & SW packet transfer mechanisms.
A detailed description of the adapter is contained in the header's
comments.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The PMD callbacks are used by the rte_event_eth_rx_xxx() APIs to
configure and control the ethernet receive adapter if packet transfers
from the ethdev to eventdev is implemented in hardware.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The caps API allows application to retrieve capability information
needed to configure the ethernet Rx adapter for the eventdev and
ethdev pair.
For e.g., the ethdev, eventdev pairing maybe such that all of the
ethdev Rx queues can only be connected to a single event queue, in
this case the application is required to pass in -1 as the queue id
when adding a receive queue to the adapter.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds the new_event_threshold port attribute, so the entire port
configuration structure passed to rte_event_queue_setup can be queried.
Signed-off-by: Gage Eads <gage.eads@intel.com>
This commit adds three new queue attributes, so that the entire queue
configuration structure passed to rte_event_queue_setup can be queried.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Naming convention for event drivers is "rte_pmd_<name>_event_version.map"
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit bumps the library version to refect the ABI change
caused by removing the individual rte_event_port_count, queue_count,
and other get functions. These functions are superseded by the
get-attribute style API, which allows fetching values without API/ABI
changes.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds an attribute to the eventdev, allowing applications
to retrieve if the eventdev is running or stopped. Note that no API
or ABI changes were required in adding the statistic, and code changes
are minimal.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds a generic queue attribute function. It also removes
the previous rte_event_queue_priority() and priority() functions, and
updates the map files and unit tests to use the new attr functions.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds a device attribute function, allowing flexible
fetching of device attributes, like port count or queue count.
The unit tests and .map file are updated to the new function.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit reworks the port functions to retrieve information
about the port, like the enq or deq depths. Note that "port count"
is a device attribute, and is added in a later patch for dev attributes.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Update doxygen to make it clear that RTE_EVENT_OP_FORWARD and
RTE_EVENT_OP_RELEASE must only be enqueued to the same port that the
original event was dequeued from.
Signed-off-by: Tim McDaniel <timothy.mcdaniel@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Events sent through single-link queues are naturally in-order and
atomic, without reordering or atomic scheduling. Logically the
nb_atomic_flows and nb_atomic_order_sequences arguments don't apply to a
single link queue, but applications must set these (depending on the queue
config type) to bypass the is_valid_{ordered, atomic}_queue_conf() checks
in the eventdev layer.
This commit updates those is_valid_* functions to ignore queues with the
SINGLE_LINK flag, to simplify their configuration.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds an union in VhostUserMsg to distinguish between
master and slave initiated requests, instead of casting slave
requests as master request.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Added new callbacks to notify about socket connection status.
As destroy_device is used for virtqueue processing *pause* as well as
connection close, the user has no distinction between those.
Consider the following scenario:
rte_vhost: received SET_VRING_BASE message,
calling destroy_device() as usual
user: end-user asks to remove the device (together with socket file),
OK, device is not *in use* - that's NOT the behavior we want
calling rte_vhost_driver_unregister() etc.
Instead of changing new_device/destroy_device callbacks and breaking
the ABI, a set of new functions new_connection/destroy_connection
has been added.
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Fix calling strncpy with the a maximum size equal of destination
array size.
Coverity issue: 140732
Fixes: e3b434818b ("net/virtio-user: support kernel vhost")
Cc: stable@dpdk.org
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
To use pointer instead of memcpy can save many cycles in the funciton
virtio_send_command.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Fixed a comment in struct virtionet_ctl, referring to the ring type
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
As soon as a page used by a ring is invalidated, the access_ok flag
is cleared, so that processing threads try to map them again.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Translating the start addresses of the rings is not enough, we need to
be sure all the ring is made available by the guest.
It depends on the size of the rings, which is not known on SET_VRING_ADDR
reception. Furthermore, we need to be be safe against vring pages
invalidates.
This patch introduces a new access_ok flag per virtqueue, which is set
when all the rings are mapped, and cleared as soon as a page used by a
ring is invalidated. The invalidation part is implemented in a following
patch.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
When IOMMU is enabled, the ring addresses set by the
VHOST_USER_SET_VRING_ADDR requests are guest's IO virtual addresses,
whereas Qemu virtual addresses when IOMMU is disabled.
When enabled and the required translation is not in the IOTLB cache,
an IOTLB miss request is sent, but being called by the vhost-user
socket handling thread, the function does not wait for the requested
IOTLB update.
The function will be called again on the next IOTLB update message
reception if matching the vring addresses.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
