This function can be used to calculate the checksum of data embedded in
mbuf, that can be composed of several segments.
This function will be used by the virtio pmd in next commits to calculate
the checksum in software in case the protocol is not recognized.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This fix is for IPv6 checksum offload error on RHEL65.
Any optimalisation above -O0 provide error in IPv6 checksum
flag "-fstrict-aliasing" is default for optimalisation above -O0.
Step 1: testpmd -c 0x6 -n 4 -- -i --portmask=0x3 --disable-hw-vlan
--enable-rx-cksum --crc-strip --txqflags=0
Step 2: settings and start
set verbose 1
set fwd csum
start
Step 3: send scapy with bad checksum IPv6/TCP packet
Ether(src="52:00:00:00:00:00",
dst="90:e2:ba:4a:33:5d")/IPv6(src="::1")/TCP(chksum=0xf)/("X"*46)
Step 4: Received packets:
RESULTS: IPv6/TCP': ['0xd41'] or other unexpected.
EXPECTED RESULTS: IPv6/TCP': ['0x9f5e']
Fixes: 2b039d5f20 ("net: fix build with gcc 4.4.7 and strict aliasing")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
There are no memcpy functions in rte_ip.h so there is no need to include
rte_memcpy.h in that file.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
- Only x540 and 82599 devices support LRO.
- Add the appropriate HW configuration.
- Add RSC aware rx_pkt_burst() handlers:
- Implemented bulk allocation and non-bulk allocation versions.
- Add LRO-specific fields to rte_eth_rxmode, to rte_eth_dev_data
and to ixgbe_rx_queue.
- Use the appropriate handler when LRO is requested.
Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch contains a fix for link bonding handling of vlan tagged packets in mode 3 and 5.
Currently xmit_slave_hash function misinterprets the PKT_RX_VLAN_PKT flag to mean that
there is a vlan tag within the packet when in actually means that there is a valid entry
in the vlan_tci field in the mbuf.
- Fixed VLAN tag support in hashing functions.
- Adds support for TCP in layer 4 header hashing.
- Splits transmit hashing function into separate functions for each policy to
reduce branching and to make the code clearer.
- Fixed incorrect flag set in test application packet generator.
Test report: http://dpdk.org/ml/archives/dev/2015-January/010792.html
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SunX Jiajia <sunx.jiajia@intel.com>
For rte_ipv6_phdr_cksum() gcc 4.8.* with "-O3" not always generates
correct code.
Sometimes it 'forgets' to put len and proto fields of psd_header on the stack.
To overcome that problem and speedup things a bit, refactored rte_raw_cksum()
by splitting ipv6 pseudo-header csum calculation into 3 phases:
1. calc sum for src & dst addresses
2. add sum for proto & len.
3. finalise sum
That makes gcc to generate valid code and helps to avoid any copying.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
include/rte_ip.h:161: error: dereferencing pointer ‘u16’
does break strict-aliasing rules
include/rte_ip.h:157: note: initialized from here
...
The root cause is that, compile enable strict aliasing by default,
while in function rte_raw_cksum() try to convert 'const char *'
to 'const uint16_t *'.
This workaround is to solve the compile issue of GCC strict-aliasing (two
different type pointers should not be point to the same memory address).
For GCC 4.4.7 it will definitely occurs if flags "-fstrict-aliasing"
and "-Wall" used.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
[Thomas: add workaround comment]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It was impossible to include netinet/in.h and rte_ip.h
because the IP protocols were redefined.
It is removed because useless.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Some of the NICs supported by DPDK have a possibility to accelerate TCP
traffic by using segmentation offload. The application prepares a packet
with valid TCP header with size up to 64K and deleguates the
segmentation to the NIC.
Implement the generic part of TCP segmentation offload in rte_mbuf. It
introduces 2 new fields in rte_mbuf: l4_len (length of L4 header in bytes)
and tso_segsz (MSS of packets).
To delegate the TCP segmentation to the hardware, the user has to:
- set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
PKT_TX_TCP_CKSUM)
- set the flag PKT_TX_IPV4 or PKT_TX_IPV6
- set PKT_TX_IP_CKSUM if it's IPv4, and set the IP checksum to 0 in
the packet
- fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
- calculate the pseudo header checksum without taking ip_len in account,
and set it in the TCP header, for instance by using
rte_ipv4_phdr_cksum(ip_hdr, ol_flags)
The API is inspired from ixgbe hardware (the next commit adds the
support for ixgbe), but it seems generic enough to be used for other
hw/drivers in the future.
This commit also reworks the way l2_len and l3_len are used in igb
and ixgbe drivers as the l2_l3_len is not available anymore in mbuf.
Signed-off-by: Mirek Walukiewicz <miroslaw.walukiewicz@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce new functions to calculate checksums. These new functions
are derivated from the ones provided csumonly.c but slightly reworked.
There is still some room for future optimization of these functions
(maybe SSE/AVX, ...).
This API will be modified in tbe next commits by the introduction of
TSO that requires a different pseudo header checksum to be set in the
packet.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
