According to the api, rte_log() / rte_vlog() are supposed to check the log level
and type but they were not doing so. This check was only done in the RTE_LOG
macro while this macro is only there to remove log messages at build time.
rte_log() always calls rte_vlog(), so do the check in rte_vlog() only.
Signed-off-by: Jean Dao <jean.dao@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
This patch removes the use of rte_fdir_filter from enic_clsf.
This also takes care of modifying the version and copyright string.
Signed-off-by: Sujith Sankar <ssujith@cisco.com>
During build phase ACL doing quite a lot of memory allocations
for relatively small temporary structures.
In theory each of such allocation can fail, so we need to handle
all these possible failures.
That adds a lot of extra checks and makes the code harder to read and follow.
To simplify the process, made changes to handle all such failures
in one place.
Note, that all that memory for temporary structures
is freed at one go at the end of build phase.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Verify that we can attach a mbuf to another one that does not have
the same data room size and priv_size.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Check that the data in the cloned mbuf is the same than in the
reference mbuf.
Check that the reference counter is incremented for each segment.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
It's better to name the mbuf 'm' instead of 'mc' as it's not a clone.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Remove one limitation of rte_pktmbuf_attach(): "mbuf we're attaching to
must be direct".
Now, when we attach to an indirect mbuf:
- copy the all relevant fields (addr, len, offload, ...) as before
- get the pointer to the mbuf that embeds the data buffer (direct mbuf),
and increase the reference counter of this one.
When detaching the mbuf, we can retrieve this direct mbuf as the pointer
is determined from the buffer address.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a new priv_size field in mbuf structure that should
be initialized at mbuf pool creation. This field contains the
size of the application private data in mbufs.
Introduce new static inline functions rte_mbuf_from_indirect()
and rte_mbuf_to_baddr() to replace the existing macros, which
take the private size in account when attaching and detaching
mbufs.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a new wrapper to rte_mempool_create() to simplify the creation
of a packet mbuf pool.
This wrapper can be used if there is no specific mempool flags, and
no specific mbuf or pool constructor function, which is most of the
use cases.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The rte_pktmbuf_pool_init() and rte_pktmbuf_init() functions now
support to have a non-hardcoded buffer length. We can remove the
specific functions used in testpmd and replace them by the standard
ones.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Allow the user to use the default rte_pktmbuf_init() function even
if the mbuf private size is not 0.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This code retrieving the pool private area is duplicated in many
places, we can use of function for it.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The mbuf pool private area must always be populated in a mbuf pool.
The applications or drivers may expect that for a mbuf pool, the mbuf
pool private area (mbuf_data_room_size and mbuf_priv_size) are
properly filled.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Deduct the mbuf data room size from mempool->elt_size and priv_size,
instead of using an hardcoded value that is not related to the real
buffer size.
To use rte_pktmbuf_pool_init(), the user can either:
- give a NULL parameter to rte_pktmbuf_pool_init(): in this case, the
private size is assumed to be 0, and the room size is
mp->elt_size - sizeof(struct rte_mbuf).
- give the rte_pktmbuf_pool_private filled with appropriate
data_room_size and priv_size values.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Update the share code version into cid-10g-shared-code.2015.02.03.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Add flow director command into argument to hold the current value of FDIRCMD register;
handle flow director mask for non-cloud mode.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Add timeout as new argument in host interface command.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Add new function ixgbe_get_hi_status to get host interface command status.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Request and response command have different struct.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
The old device id: IXGBE_DEV_ID_X550EM_X is split into 2 new device id:
IXGBE_DEV_ID_X550EM_X_10G_T and IXGBE_DEV_ID_X550EM_X_1G_T
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Add function to calculate checksum for X550; and add buffer into argument list
to hold the eeprom image.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Add new phy ID: X557_PHY_ID, and implement its internal setup function and external init function.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Define the function of setting phy power;
Set copper phy power for x540.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Define function ixgbe_mng_present to check if management capability is present or not.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
New function to get bus information for x550em;
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
It could early return according to read status.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Use switch-case statement to replace if-else statement.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Wait for a last completion before clearing buffers,
and before proceeding, it needs make sure that the PCIe block does not have
transactions pending.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
It needs check if the bus type is the unknown type or not.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
LAN ID is needed for i2c access, so move it before reading I2C eeprom.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Support the bit-bang mode on X550;
And negate I2C output enable;
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
New API to perform I2C read combined operation.
New API to perform I2C write combined operation.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Remove '&' before function name;
Adjust the spaces etc.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
There are no memcpy functions in rte_ip.h so there is no need to include
rte_memcpy.h in that file.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
probe and close both don't modify the rte_pci_addr structure
that is passed.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The PCI device id table is immutable and should be made const
in all drivers. The pseudo drivers can initialize their local
copy as necessary.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The Linux style is not to put extra useless paren's around
the expression passed to return statement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
