Indirect actions should be used to do shared counters.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Make it simpler to debug configurations and code related to the representor
info API.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
When configuring DCB, testpmd retains the rx_mode/tx_mode configuration in
rte_port->dev_conf. But some configurations, such as the link_speed, were
not saved if they were set before configuring DCB.
Fixes: 1a572499be ("app/testpmd: setup DCB forwarding based on traffic class")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Add a new cmdline to help diagnostic the bonding mode 4 in testpmd.
Show the lacp information about the bonded device and its slaves:
show bonding lacp info <bonded device port_id>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
When random number of Tx segments is enabled, because the actual
number of segments may be only one, the first segment of the Tx
packets must accommodate a complete being sending Eth/IP/UDP packet.
Besides, if multiple flow is enabled, the forwarding will update
the IP and UDP header, these headers shouldn't cross segments.
This also requires the first Tx segment can accommodate a complete
Eth/IP/UDP packet.
In addition, if time stamp is enabled, the forwarding needs more
Tx segment space for time stamp information.
This patch adds checks in beginning of forward engine to make sure
all above conditions are met.
Bugzilla ID: 797
Fixes: 79bec05b32 ("app/testpmd: add ability to split outgoing packets")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
For each forward engine, there may be some special conditions
must be met before the forwarding runs.
Adding checks for these conditions in configuring is not suitable,
because one condition may rely on multiple configurations, and the
conditions required by each forward engine is not general.
The best solution is each forward engine has a callback to check
whether these conditions are met, and then testpmd can call the
callback to determine whether the forwarding can be started.
There was a void callback 'port_fwd_begin' in forward engine,
it did some initialization for forwarding, this patch updates its
return value then we can add some checks in it to confirm whether
the forwarding can be started. In addition, this patch calls the
callback before the forwarding stats is reset and then launches the
forwarding engine.
Bugzilla ID: 797
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
test_shift1_check() function fails with clang build.
The reason for that is that clang uses 64-bit shift instruction for
what expected to be 32-bit operation.
To be more specific, this C code:
r2 = (uint32_t)r2 >> r4;
With clang produces:
41a4eb: 48 d3 ef shr %cl,%rdi
In that particular case it is an allowed choice, as from one side
left-operand value is known to fit into 32 bits, from other side
according to 'C' standard:
"...if the value of the right operand is negative or is greater than
or equal to the width of the promoted left operand, the behavior is
undefined."
The problem is that on x86 behavior for 64-bit and 32-bit shift
operation might differ.
The fix avoids undefined behavior by making sure
that right operand will not exceed width of the promoted left operand.
Bugzilla ID: 811
Fixes: 9f8f9d91a7 ("test/bpf: introduce functional test")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
With data input, output and harq also supported in big
endian format, this patch updates the testbbdev application
to handle the endianness conversion as directed by the
the driver being used.
The test vectors assumes the data in the little endian order, and
thus if the driver supports big endian data processing, conversion
from little endian to big is handled by the testbbdev application.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Enabled NXP la12xx bbdev driver in test bbdev app
for unit testing.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
This patch add support for RAW API testing with ZUC
and SNOW test cases.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch add support for raw API tests for
dpaa_sec and dpaa2_sec platforms.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch renames the sgl to src_sgl in struct rte_crypto_sym_vec
to help differentiating between source and destination sgl.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As described in [1] and as announced in [2], The field ``dataunit_len``
of the ``struct rte_crypto_cipher_xform`` moved to the end of the
structure and extended to ``uint32_t``.
In this way, sizes bigger than 64K bytes can be supported for data-unit
lengths.
[1] commit d014dddb2d ("cryptodev: support multiple cipher
data-units")
[2] commit 9a5c09211b ("doc: announce extension of crypto data-unit
length")
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch fixes a possible buffer overrun problem in crypto perf test.
Previously when user configured AAD size is over 12 bytes the copy
of template AAD will cause a buffer overrun.
The problem is fixed by only copy up to 12 bytes of AAD template.
Fixes: 8a5b494a7f ("app/test-crypto-perf: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Przemyslaw Zegan <przemyslawx.zegan@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
As reported by Dmitry, RTE_MEMPOOL_F_POOL_CREATED is a flag only
manipulated internally.
This flag is not supposed to be requested from an application and would
probably result in an incorrect behavior if an application did pass it.
At least one other internal flag has been added recently and more may be
introduced later.
Rework the check and export a mask of valid user flags for use in the
unit test.
Fixes: b240af8b10 ("mempool: enforce valid flags at creation")
Reported-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add RTE_ prefix to helper macro to calculate mempool header size and
make it internal. Old macro is still available, but deprecated.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Fix the mempool flags namespace by adding an RTE_ prefix to the name.
The old flags remain usable, to be deprecated in the future.
Flag MEMPOOL_F_NON_IO added in the release is just renamed to have RTE_
prefix.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Convert rte_atomic usages to compiler atomic built-ins
for stats sync.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
In stack module, remove the header file rte_atomic.h
as it is not being used.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Mempool is a generic allocator that is not necessarily used
for device IO operations and its memory for DMA.
Add MEMPOOL_F_NON_IO flag to mark such mempools automatically
a) if their objects are not contiguous;
b) if IOVA is not available for any object.
Other components can inspect this flag
in order to optimize their memory management.
Discussion: https://mails.dpdk.org/archives/dev/2021-August/216654.html
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Data path performance can benefit if the PMD knows which memory it will
need to handle in advance, before the first mbuf is sent to the PMD.
It is impractical, however, to consider all allocated memory for this
purpose. Most often mbuf memory comes from mempools that can come and
go. PMD can enumerate existing mempools on device start, but it also
needs to track creation and destruction of mempools after the forwarding
starts but before an mbuf from the new mempool is sent to the device.
Add an API to register callback for mempool life cycle events:
* rte_mempool_event_callback_register()
* rte_mempool_event_callback_unregister()
Currently tracked events are:
* RTE_MEMPOOL_EVENT_READY (after populating a mempool)
* RTE_MEMPOOL_EVENT_DESTROY (before freeing a mempool)
Provide a unit test for the new API.
The new API is internal, because it is primarily demanded by PMDs that
may need to deal with any mempools and do not control their creation,
while an application, on the other hand, knows which mempools it creates
and doesn't care about internal mempools PMDs might create.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add a test case to validate the functionality of drivers' burst capacity
API implementations.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
For DMA devices which support the fill operation, run unit tests to
verify fill behaviour is correct.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Add a series of tests to inject bad copy operations into a dmadev to
test the error handling and reporting capabilities. Various combinations
of errors in various positions in a burst are tested, as are errors in
bursts with fence flag set, and multiple errors in a single burst.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Add unit tests for various combinations of use for dmadev, copying
bursts of packets in various formats, e.g.
1. enqueuing two smaller bursts and completing them as one burst
2. enqueuing one burst and gathering completions in smaller bursts
3. using completed_status() function to gather completions rather than
just completed()
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
When running the dmadev_autotest, run the suite of copy tests on the
skeleton driver created for API testing too, rather than just destroying
the driver instances once the API tests are complete. This helps to
sanity check the tests themselves are reasonable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
For each dmadev instance, perform some basic copy tests to validate that
functionality.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Run basic sanity tests for configuring, starting and stopping a dmadev
instance to help validate drivers. This also provides the framework for
future tests for data-path operation.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
This patch add dmadev API test which based on 'dma_skeleton' vdev. The
test cases could be executed using 'dmadev_autotest' command in test
framework.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
As stated in the API, dynamic field and flags should be created with no
additional flag (simply in the API for future changes).
Fix the dynamic flag register helper which was not enforcing it and add
unit tests.
Fixes: 4958ca3a44 ("mbuf: support dynamic fields and flags")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
If we do not enforce valid flags are passed by an application, this
application might face issues in the future when we add more flags.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
If we do not enforce valid flags are passed by an application, this
application might face issues in the future when we add more flags.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
When checking the results of the rte_atomic128_cmp_exchange() function,
current code compares the values of a uint32_t and a uint64_t variable.
If the number of lcores used by the test is large, or the value of the
iteration count N is increased, the variable size mismatch can cause a
false test failure. Modify the comparison to compare uint64_t values.
Fixes: fa3253c534 ("test/atomic: add 128-bit atomic compare exchange test")
Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
get_hugepage_dir() was implemented in such a way that a --huge-dir
option had to exactly match the mountpoint, but there's no reason for
this restriction: DPDK might not be the only user of hugepages, and
shouldn't assume it owns an entire mountpoint. For example, if I have
/dev/hugepages/myapp, and /dev/hugepages/dpdk, I should be able to
specify:
--huge-dir=/dev/hugepages/dpdk/
and have DPDK only use that sub-directory.
Fix the implementation to allow a sub-directory within a suitable
hugetlbfs mountpoint to be specified, preferring the closest match.
Signed-off-by: John Levon <john.levon@nutanix.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This tool was used in the past to execute unit tests with make.
Meson has its own list of unit test, and its own way of calling them.
Since the switch to meson only builds, there is nothing depending on the
script in DPDK itself.
No CI seems to call it, time to put it to rest.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
The CI reported rare (and cryptic) failures like:
RTE>>service_autotest
+ ------------------------------------------------------- +
+ Test Suite : service core test suite
+ ------------------------------------------------------- +
+ TestCase [ 0] : unregister_all succeeded
+ TestCase [ 1] : service_name succeeded
+ TestCase [ 2] : service_get_by_name succeeded
Service dummy_service Summary
dummy_service: stats 1 calls 0 cycles 0 avg: 0
Service dummy_service Summary
dummy_service: stats 0 calls 0 cycles 0 avg: 0
+ TestCase [ 3] : service_dump succeeded
+ TestCase [ 4] : service_attr_get failed
+ TestCase [ 5] : service_lcore_attr_get succeeded
+ TestCase [ 6] : service_probe_capability succeeded
+ TestCase [ 7] : service_start_stop succeeded
+ TestCase [ 8] : service_lcore_add_del succeeded
+ TestCase [ 9] : service_lcore_start_stop succeeded
+ TestCase [10] : service_lcore_en_dis_able succeeded
+ TestCase [11] : service_mt_unsafe_poll succeeded
+ TestCase [12] : service_mt_safe_poll succeeded
perf test for MT Safe: 42.7 cycles per call
+ TestCase [13] : service_app_lcore_mt_safe succeeded
perf test for MT Unsafe: 73.3 cycles per call
+ TestCase [14] : service_app_lcore_mt_unsafe succeeded
+ TestCase [15] : service_may_be_active succeeded
+ TestCase [16] : service_active_two_cores succeeded
+ ------------------------------------------------------- +
+ Test Suite Summary : service core test suite
+ ------------------------------------------------------- +
+ Tests Total : 17
+ Tests Skipped : 0
+ Tests Executed : 17
+ Tests Unsupported: 0
+ Tests Passed : 16
+ Tests Failed : 1
+ ------------------------------------------------------- +
Test Failed
RTE>>
stderr:
EAL: Detected CPU lcores: 16
EAL: Detected NUMA nodes: 2
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/service_autotest/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: No available 1048576 kB hugepages reported
EAL: VFIO support initialized
EAL: Device 0000:03:00.0 is not NUMA-aware, defaulting socket to 0
APP: HPET is not enabled, using TSC as default timer
EAL: Test assert service_attr_get line 340 failed: attr_get() call didn't
get call count (zero)
According to API, trying to stop a service lcore is not possible if this
lcore is the only one associated to a service.
Doing this will result in a -EBUSY return code from
rte_service_lcore_stop() which the service_attr_get subtest was not
checking.
This left the service lcore running, and a race existed with the main
lcore on checking the service attributes which triggered this CI
failure.
To fix this, dissociate the service lcore with current service.
Once fixed this first issue, a race still exists, because the
wait_slcore_inactive helper added in a previous fix was not
paired with a check that the service lcore _did_ stop.
Add missing check on rte_service_lcore_may_be_active.
Fixes: 4d55194d76 ("service: add attribute get function")
Fixes: 52bb6be259 ("test/service: fix race condition on stopping lcore")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Change the inaccurate comment of 'set pass flag' to 'clear pass flag'
as the '*pass_test = 0' code actually implements clearing.
Fixes: f038a81e1c ("service: add unit tests")
Cc: stable@dpdk.org
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds tests for inner IP and inner L4 checksum
verification in IPsec mode.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Using memcpy to update event crypto metadata fields (request/response)
will result in one overwriting the other. To avoid this, fields of each
structure should be updated one by one.
Fixes: 3c2c535ecf ("test: add event crypto adapter auto-test")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Adding option to drop CRC24B to align with existing
feature for 5G
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Adding a missing operation when CRC16
is being used for TB CRC check.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Add test cases for zuc 256 bit key.
Add test case for zuc 8 and 16 byte digest with
256 bit key mode
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
A more fine-grain flow API action RTE_FLOW_ACTION_TYPE_SAMPLE should
be used instead of it.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some drivers don't need Rx and Tx queue release callback, make them
optional. Clean up empty queue release callbacks for some drivers.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Definition of `rte_ether_addr` structure used a workaround allowing DPDK
and Windows SDK headers to be used in the same file, because Windows SDK
defines `s_addr` as a macro. Rename `s_addr` to `src_addr` and `d_addr`
to `dst_addr` to avoid the conflict and remove the workaround.
Deprecation notice:
https://mails.dpdk.org/archives/dev/2021-July/215270.html
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
The memory autotests were failing on FreeBSD, due to an incorrect errno
variable being checked for ENOTSUP. The test checked "errno" while the
DPDK API sets "rte_errno". Changing to check the right variable makes
the test behave properly.
Fixes: c3e35a0966 ("test/mem: check segment fd API")
Reported-by: Brandon Lo <blo@iol.unh.edu>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
rte_efd_create() function was using uint8_t for a socket bitmask,
for one of its parameters.
This limits the maximum of NUMA sockets to be 8.
Changing to uint64_t increases it to 64, which should be
more future-proof.
Coverity issue: 366390
Fixes: 56b6ef874f ("efd: new Elastic Flow Distributor library")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
