This reverts
commit 4dab342b7522 ("net/virtio: do not falsely claim to do IP checksum").
The description of rxmode->hw_ip_checksum is:
hw_ip_checksum : 1, /**< IP/UDP/TCP checksum offload enable. */
Despite its name, this field can be set by an application to enable L3
and L4 checksums. In case of virtio, only L4 checksum is supported and
L3 checksums flags will always be set to "unknown".
Fixes: 4dab342b7522 ("net/virtio: do not falsely claim to do IP checksum")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This reverts
commit 701a64622c26 ("net/virtio: do not claim to support LRO")
Setting rxmode->enable_lro is a way to tell the host that the guest is
ok to receive tso packets. From the guest point of view, it is like
enabling LRO on a physical driver.
Fixes: 701a64622c26 ("net/virtio: do not claim to support LRO")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Acccording to the vhost-user spec [0], client must start ring
upon receiving a kick (that is, detecting that file descriptor
is reachable) on the descriptor specified by VHOST_USER_SET_VRING_KICK.
The code sends a kick to the rx queue. It is missing sending a
kick for the tx queue. This patch is to add the missing code to
comply with the spec.
[0]: https://fossies.org/linux/qemu/docs/specs/vhost-user.txt
Signed-off-by: Steven Luong <sluong@cisco.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
To use macro instead of magic number in order to enhance code
readability.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
With the IOVA auto detection changes, bus scan is performed before
memory initialization. DPAA bus scan must not use rte_malloc in
its path.
Fixes: cf408c22476c ("eal: auto detect IOVA mode")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Previously, to get MFN address in dom0, this API is a wrapper to
obtain the "physical address".
As we will removed xen dom0 support, this API is not necessary.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
xmem_size and xmem_usage need to know the status of mempool flags,
so add 'flags' arg in _xmem_size/usage() api.
Following patch will make use of that.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There are two bonding APIs using ABI versioning, and both have
port_id as parameter. Since we are already breaking ABI, no need
to keep older versions of APIs.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of enabling the RX checksum by default, make it
enable only with user ethernet configuration
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The current code is sending 8 packet in each internal loop.
In some of the conditions, mbuf is being allocated or freed.
In case of error, the code is returning without taking care of
such buffer. It is better to send already prepared buffer and err
for the current failure only.
Fixes: 9e5f3e6d3658 ("net/dpaa2: handle non-hardware backed buffer pool")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
name alignment for check command and result functions
putting them as separate functions instead of changing the original
functions.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The compilation with gcc-6.3.0 and EXTRA_CFLAGS=-Og gives the following
error:
CC qede_rxtx.o
qede_rxtx.c: In function ‘qede_start_queues’:
qede_rxtx.c:797:9: error: ‘rc’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]
return rc;
^~
If there is no Rx or Tx queue, rc will not be initialized. Fix it
by initializing rc to -1.
Fixes: 4c4bdadfa9e7 ("net/qede: refactoring multi-queue implementation")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Harish Patil <harish.patil@cavium.com>
The compilation with gcc-6.3.0 and EXTRA_CFLAGS=-Og gives the following
error:
CC rte_pmd_bnxt.o
rte_pmd_bnxt.c: In function ‘rte_pmd_bnxt_set_all_queues_drop_en’:
rte_pmd_bnxt.c:116:6: error: ‘rc’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]
int rc;
^~
This can happen if both bp->nr_vnics and bp->pf.active_vfs are 0.
Fix it by initializing rc to -EINVAL.
Fixes: 49947a13ba9e ("net/bnxt: support Tx loopback, set VF MAC and queues drop")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
If vectorized Rx burst is short of mbufs in replenishment, Rx SW ring can
overflow as the Rx burst handles 4 packets in a loop. This is because the
function fills SW ring and its mbufs first and checks validity of
each completion later. So, there should be some buffer slots at the tail of
the ring to protect mbufs which are already owned by application.
Fixes: 6cb559d67b83 ("net/mlx5: add vectorized Rx/Tx burst for x86")
Cc: stable@dpdk.org
Reported-by: Martin Weiser <martin.weiser@allegro-packets.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
One of the main identified use cases for the tap PMD is to be used in
combination with the fail-safe PMD as a fallback for a physical device.
Fail-safe is very strict about making sure its current configuration is
properly applied to all slave devices, they get rejected otherwise in
order to maintain a consistent state.
The problem is that tap's RSS support is currently limited to the
default (non-Toeplitz) balancing performed by the kernel on all Rx
queues. While proper RSS support emulation in the tap PMD is a work in
progress, the lack of rte_flow counterpart prevents validation of the
above use case in the meantime.
Given that unlike most PMDs, tap is more about convenience than
performance, support for the RSS action can be temporarily faked with
a minimum amount of code and mostly correct behavior by treating it
like a QUEUE action. Traffic is directed to the first queue of the set.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
This patch sets TEID of GTP-C and GTP-U as filter type
by replacing existed filter types inner_mac and TUNNEL_KEY.
This configuration will be set when adding GTP-C or
GTP-U filter rules, and it will be invalid only by
NIC core reset.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds i40e_flow_parse_gtp_filter parsing
function for GTP-C and GTP-U to support cloud filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds FDIR support for GTP-C and GTP-U. The
input set of GTP-C and GTP-U is TEID.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Seán Harte <seanbh@gmail.com>
rte_eth_fdir_* structures are still used in FDIR functions.
This patch adds i40e private FDIR related structures and
functions to finish integration FDIR with generic flow API.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Update new packet type and new pctype info when downloading
profile.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
We were hardcoding the max MAC addresses to 32, while the HW
can support more than that. This was restricting the number of VMDQ
pools that we could support. Use the value obtained from FW instead.
Fixes: 804e746c7b73 ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for ntuple filtering.
Only RTE_5TUPLE_FLAGS is supported currently.
RTE_2TUPLE_FLAGS is not supported.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add new functions which allow modify, return or reset to default
the contents of flow type to pctype dynamic mapping table.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Implement dynamic mapping of software flow types to hardware pctypes.
This allows to add new flow types and pctypes for DDP without changing
API of the driver. The mapping table is located in private
data area for particular network adapter and can be individually
modified with set of appropriate functions.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds new package info types to get list of protocols,
pctypes and ptypes defined in a profile
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The callback must not attempt to program RSS table to the HW
in non-started state; the new table must be remembered and
applied on the next start
Fixes: 32bcfb0a50b1 ("net/sfc: update RSS redirection table")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
This patch adds two missing device IDs for Intel i210 chips in flashless
mode. Copper flashless mode was tested on a PC Engines APU2C4 board.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
At present, creating bonding devices using --vdev is broken for PMD like
mlx5 as it is neither UIO nor VFIO based and hence PMD driver is unknown
to find_port_id_by_pci_addr(), as below.
testpmd <EAL args> --vdev 'net_bonding0,mode=1,slave=<PCI>,socket_id=0'
PMD: bond_ethdev_parse_slave_port_kvarg(150) - Invalid slave port value
(<PCI ID>) specified
EAL: Failed to parse slave ports for bonded device net_bonding0
This patch fixes parsing PCI ID from bonding device params by verifying
it in RTE PCI bus, rather than checking dev->kdrv.
Fixes: eac901ce29be ("ethdev: decouple from PCI device")
Cc: stable@dpdk.org
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Gaetan Rivet <gaetan.rivet@6wind.com>
