In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Documents the assumption that 'xstats[i].id == i' and
key=xstats_names[i].name, value=xstats[i].value
xstats[i].id is still used for xstats _by_id() APIs.
This patch reverts some part of the commit 6d52d1d4af ("ethdev:
clarify extended statistics documentation")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
If devices always use descriptors in the same order in which they have
been made available. These devices can offer the VIRTIO_F_IN_ORDER
feature. If negotiated, this knowledge allows devices to notify the use
of a batch of buffers to virtio driver by only writing used ring index.
Vhost user device has supported this feature by default. If vhost
dequeue zero is enabled, should disable VIRTIO_F_IN_ORDER as vhost can’t
assure that descriptors returned from NIC are in order.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Introduce an helper for PMD to expand easily flows items list with RSS
action into multiple flow items lists with priority information.
For instance a user items list being "eth / end" with rss action types
"ipv4-udp ipv6-udp end" needs to be expanded into three items lists:
- eth
- eth / ipv4 / udp
- eth / ipv6 / udp
to match the user request. Some drivers are unable to reach such
request without this expansion, this API is there to help those.
Only PMD should use such API for their internal cooking, the application
will still handle a single flow.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
COUNT action has been modified and has several fields not addressable
though testpmd. In addition, as those fields are not definable testpmd
is providing an empty configuration which is undefined.
Fixes: fb8fd96d42 ("ethdev: add shared counter to flow API")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
static logging macro RTE_PMD_DEBUG_TRACE is enabled with a few DEBUG
config options, including RTE_LIBRTE_ETHDEV_DEBUG
RTE_LIBRTE_ETHDEV_DEBUG is still used for data path logging, but all
ethdev logging switched to dynamic logging, so no need to enable static
logging macro for ethdev.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Replace RTE_PMD_DEBUG_TRACE with RTE_ETHDEV_LOG.
RTE_PMD_DEBUG_TRACE is using hardcoded PMD logtype and ERR log level,
controlled by compile time flags.
RTE_ETHDEV_LOG is using dynamic ethdev_logtype.
Also a few minor cleanups, like
- use %u for unsigned values like port_id which is uint16_t
- use PRIx64 for owner_id
- Join some log lines
- Unify to not have a "." at the end of the log
- Unify log start with uppercase
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Macro moved to header to be able to convert logging usage in header.
And since it has been moved to public header changed naming and added
RTE prefix, ethdev_log -> RTE_ETHDEV_LOG
Also need to add logtype variable to map file since logging macro used
from other libraries.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The log_cache_nb_elem was never incremented, resulting
in all dirty pages to be missed during live migration.
Fixes: c16915b871 ("vhost: improve dirty pages logging performance")
Cc: stable@dpdk.org
Reported-by: Peng He <xnhp0320@icloud.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Previously, we were putting an exclusive lock to prevent secondary
processes spinning up while we are sending our messages. However,
using exclusive locks had an effect of disallowing multiple
simultaenous unrelated messages/requests being sent, which was
not the intention behind locking.
Fix it to put a shared lock on the directory. That way, we still
prevent secondary process initializations while sending data over
IPC, but allow multiple unrelated transmissions to proceed.
Fixes: 89f1fe7e6d ("eal: lock IPC directory on init and send")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Qi Zhang <qi.z.zhang@intel.com>
In 17.08, the crypto operation was restructured,
and some reserved bytes (5) were added to have the mempool
pointer aligned to 64 bits, since the structure is expected
to be aligned to 64 bits, allowing future additions with no
ABI breakage needed.
In 18.05, a new 2-byte field was added, so the reserved bytes
were reduced to 3. However, this field was added after the first 3 bytes
of the structure, causing it to be placed in an offset of 4 bytes,
and therefore, forcing the mempool pointer to be placed after 16 bytes,
instead of a 8 bytes, causing unintentionally the ABI breakage.
This commit fixes the breakage, by swapping the reserved bytes
and the private_data_offset field, so the latter is aligned to 2 bytes
and the offset of the mempool pointer returns to its original offset,
8 bytes.
Fixes: 54c8368466 ("cryptodev: set private data for session-less mode")
Cc: stable@dpdk.org
Reported-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Converted the license header of the files
that still have the old full header.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
This patch renames u16 to u16_buf. u16 as a variable name causes a shadowed
declaration warning if, for example, the application also typedefs u16
(e.g. by including a header containing "typedef unsigned short u16") and
the application is built with -Wshadow.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rather than copy the string, we can use a precision in the format string
given to printf.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rather than copy the log message, we can use a precision in the format
string given to syslog.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
The Rx adapter stop call does not guarantee that the
SW service function will not execute after the
rte_event_eth_rx_adapter_stop() call.
Add a "started" flag to prevent the adapter from executing
if stop has been called.
Fixes: 9c38b704d2 ("eventdev: add eth Rx adapter implementation")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Set the internal_event_port flag when the ethdev-eventdev
packet transfer is implemented in hardware and add a check
for the flag to ignore the connection when setting up the
WRR polling sequence.
Fixes: 9c38b704d2 ("eventdev: add eth Rx adapter implementation")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add an event buffer flush when the current invocation
of the Rx adapter is completed.
This patch provides lower latency in case there is a
BATCH_SIZE of events in the event buffer.
Cc: stable@dpdk.org
Suggested-by: Narender Vangati <narender.vangati@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
After dequeuing Rx packets and enqueueing them to the
temporary buffer towards eventdev, the packet Rx loop exits
if the temporary buffer is full but the current WRR position
is not saved.
Save away the current value of the WRR position, so packets
are dequeued from the correct Rx queue in the next invocation.
Fixes: 9c38b704d2 ("eventdev: add eth Rx adapter implementation")
Cc: stable@dpdk.org
Suggested-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
The dev_id parameter to fill_event_buffer() should be 16 bit,
also rename to to eth_dev_id to avoid confusion with event device
id elsewhere in the file.
Fixes: c2189c907d ("eventdev: make ethdev port identifiers 16-bit")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
vhost_vring_call() used rte_mb(), which translates into
mfence instruction on x86.
This patch changes to use rte_smp_mb(), which changed recently
to translate into a locked ADD instruction for performance
reason.
The measured gain is up to 3% with the testpmd benchmarks.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Introduce an new common helper to avoid redundancy.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When a vDPA device is attached, vhost user will try to
register host notifiers to QEMU to allow notifications
to be delivered between the driver in the guest and the
vDPA device in the host directly.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Make sure find avalid device id before allocating
virtio_net, if not, return directly. It may avoid
allocating and freeing virtio_net when there is
not valid device id.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
PMDs should provide supported RSS hash functions via
dev_info.flow_type_rss_offloads variable.
There is a check in ethdev if requested RSS hash function is supported
by PMD or not.
This check has been relaxed in previous release to not return an error
when a non supported has function requested [1], this has been done to
not break the applications.
Adding the error return back.
PMDs need to provide correct list of supported hash functions and
applications need to take care this information before configuring
the RSS otherwise they will get an error from APIs:
rte_eth_dev_rss_hash_update()
rte_eth_dev_configure()
[1] commit af7551e2bf ("ethdev: remove error return on RSS hash check")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The error path was disabled in previous release to let apps to be more
flexible.
But this release they are enabled, applications have to obey offload API
rules otherwise they will get errors from following APIs:
rte_eth_dev_configure
rte_eth_rx_queue_setup
rte_eth_tx_queue_setup
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Instead of copying batch_copy_nb_elems into the stack,
this patch uses it directly.
Small performance gain of 3% is seen when running PVP
benchmark.
Acked-by: Zhihong Wang <zhihong.wang@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch reworks the vhost enqueue path so that a single
code path is used for both Rx mergeable or non-mergeable cases.
Acked-by: Zhihong Wang <zhihong.wang@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The *_callback_* functions are not implemented,
so they are removed from the export map file.
Fixes: ed7dd94f7f ("compressdev: add basic device management")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The functions
- vfio_get_container_fd
- vfio_get_group_fd
- vfio_get_group_no
have been renamed to
- rte_vfio_get_container_fd
- rte_vfio_get_group_fd
- rte_vfio_get_group_num
The old names are removed from the map file.
Fixes: 964b2f3bfb ("vfio: export some internal functions")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Deprecate rte_eal_mbuf_default_mempool_ops(), it shall be replaced by
rte_mbuf_best_mempool_ops().
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Currently, memzone allocation with length set to 0 that are also
IOVA-contiguous is not supported. Document this limitation.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Mem event and validator callbacks may not be supported under all
circumstances (such as when running in legacy memory mode, or on
FreeBSD), and this case needs to be handled by any code that will
use these callbacks. Spell this out more clearly, because it's not
immediately obvious that this is an expected use case.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
The rte_tm_get_number_of_leaf_nodes() API function was added in DPDK
17.08. However, it was added to the .map file with the wrong function
name (rte_tm_get_leaf_nodes), which was subsequently removed in commit
3e8ea3d ('lib: remove unused map symbols').
Add it back under the 17.08 release with the correct function name.
Fixes: 5d109deffa ("ethdev: add traffic management API")
Cc: stable@dpdk.org
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change adds extra information on name parameter for API
rte_eth_dev_get_name_by_port and rte_eth_dev_get_port_by_name.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Like original commit mentioned below, this fix synchronizes flow rule copy
function with testpmd's own implementation following "app/testpmd: fix copy
of raw flow item (revisited)".
It addresses a crash that occurs when feeding a RAW pattern item to
rte_flow_copy(). Besides external applications, two PMDs (bonding and
failsafe) rely on this function internally.
Note the scope of this patch is limited to the RAW pattern item and has no
impact on all others.
Fixes: 972bf36106 ("ethdev: fix shallow copy of flow API RSS action")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
eth_dev_last_created_port is used to store port id type and should
be extended to 16bits corresponding to ethdev port id range.
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_event_eth_rx_adapter_create allocates eth_devices for
currently available eth devices. For newly created eth
devices a new instance for rx adapter has to be created.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Nikhil Rao <nikhil.rao@intel.com>
