Add a new testpmd pattern field 'last_rsvd' that supports the
last 8-bits matching of VXLAN header.
The examples for the "last_rsvd" pattern field are as below:
1. ...pattern eth / ipv4 / udp / vxlan last_rsvd is 0x80 / end ...
This flow will exactly match the last 8-bits to be 0x80.
2. ...pattern eth / ipv4 / udp / vxlan last_rsvd spec 0x80
vxlan mask 0x80 / end ...
This flow will only match the MSB of the last 8-bits to be 1.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Raslan Darawsheh <rasland@nvidia.com>
The new flow item allows PMD to offload IPv4 IHL field for matching,
if hardware supports that operation.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
For the newly attached ports (with "port attach" command) the
default offloads settings, configured from application command
line, were not applied, causing port start failure following
the attach.
For example, if scattering offload was configured in command
line and rxpkts was configured for multiple segments, the newly
attached port start was failed due to missing scattering offload
enable in the new port settings. The missing code to apply
the offloads to the new device and its queues is added.
The new local routine init_config_port_offloads() is introduced,
embracing the shared part of port offloads initialization code.
Fixes: c9cce42876 ("ethdev: remove deprecated attach/detach functions")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
When we use the following cmd to modify the link speed of specified
port: "port config <port_id> speed xxx duplex xxx", we have to stop
all ports. It's not necessary.
Fixes: 82113036e4 ("ethdev: redesign link speed config")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Function print_fdir_mask and print_fdir_flex_payload are only called
when either i40e or ixgbe presents. Extend existing #if defined to
include these two functions, to remove "unused function" compilation
warning.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
- Make printf format OS independent
- Replace htons with RTE_BE16
- Replace POSIX specific inet_aton with OS independent inet_pton
- Replace sleep with rte_delay_us_sleep
- Replace random with rte_rand
- #ifndef mman related code for now
- Fix header inclusion
- Include rte_os_shim.h in testpmd.h
- Remove redundant headers
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Passing an uint32_t pointer to an enum pointer parameter causes
pointer-sign warning on Windows (converts between pointers to
integer types with different sign), since enum is implicitly
converted to int on Windows.
And the current enum pointer parameter of that function is actually
misleading and should be fixed as an uint32_t pointer parameter.
Fixes: b19da32e31 ("app/testpmd: add FEC command")
Cc: stable@dpdk.org
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Resolve name collisions with Windows types.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Use out only after it was checked not to be null.
Fixes: 4d07cbefe3 ("app/testpmd: add commands for conntrack")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Reviewed-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Currently action RTE_FLOW_ACTION_TYPE_METER_COLOR is defined.
Add the CLI for this action: color type (types)
There are three types: green, yellow and red.
Example for the new policy meter CLIs:
add port meter policy 0 1 g_actions color type green / end y_actions
color type yellow / end r_actions color type red / end
In the above command, the action type is
RTE_FLOW_ACTION_TYPE_METER_COLOR, the meter policy action list:
green -> green, yellow -> yellow, red -> red.
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tunnel offload model requires application to obtain PMD related flow
items or actions to construct a flow rule. These elements acquire
internal PMD flow resources that must be explicitly released.
The patch destroys tunnel offload PMD resources after flow creation
failure.
Fixes: 1b9f274623 ("app/testpmd: add commands for tunnel offload")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Counter action query was implemented as part of flow query, but was not
implemented as part of indirect action query.
This patch adds the required implementation.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The port_action_handle_query function supports query operation for
indirect RSS action.
No driver currently supports this operation, and this support is
unnecessary.
Remove it.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The fwd_config_setup() is called after init_fwd_streams().
The fwd_config_setup() will reinitialize forwarding streams.
This patch removes init_fwd_streams() from init_config().
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch adds fwd_config_setup() at the end of cmd_config_dcb_parsed()
to update "cur_fwd_config", so that the actual forwarding streams can be
queried by the "show config fwd" cmd.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Currently, the check for doing DCB test is assigned to
start_packet_forwarding(), which will be called when
run "start" cmd. But fwd_config_setup() is used in many
scenarios, such as, "port config all rxq".
This patch moves the check from start_packet_forwarding()
to fwd_config_setup().
Fixes: 7741e4cf16 ("app/testpmd: VMDq and DCB updates")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Currently, '.get_dcb_info' must be supported for the port doing DCB
test, or all information in 'rte_eth_dcb_info' are zero. It should be
prevented when user run cmd "port config 0 dcb vt off 4 pfc off".
This patch adds the check for support of reporting dcb info.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
After DCB mode is configured, if we decrease the number of RX and TX
queues, fwd_config_setup() will be called to setup the DCB forwarding
configuration. And forwarding streams are updated based on new queue
numbers in fwd_config_setup(), but the mapping between the TC and
queues obtained by rte_eth_dev_get_dcb_info() is still old queue
numbers (old queue numbers are greater than new queue numbers).
In this case, the segment fault happens. So rte_eth_dev_configure()
should be called again to update the mapping between the TC and
queues before rte_eth_dev_get_dcb_info().
Like:
set nbcore 4
port stop all
port config 0 dcb vt off 4 pfc on
port start all
port stop all
port config all rxq 8
port config all txq 8
Fixes: 900550de04 ("app/testpmd: add dcb support")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
After DCB mode is configured, the operations of port stop and port start
change the value of the global variable "dcb_test", As a result, the
forwarding configuration from DCB to RSS mode, namely,
“dcb_fwd_config_setup()” to "rss_fwd_config_setup()".
Currently, the 'dcb_flag' field in struct 'rte_port' indicates whether
the port is configured with DCB. And it is sufficient to have
'dcb_config' as a global variable to control the DCB test status. So
this patch deletes the "dcb_test".
In addition, setting 'dcb_config' at the end of init_port_dcb_config()
in case that ports fail to enter DCB mode.
Fixes: 900550de04 ("app/testpmd: add dcb support")
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Fixes: 7741e4cf16 ("app/testpmd: VMDq and DCB updates")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
For the DCB forwarding test, each core is assigned to each traffic class.
Number of forwarding cores for DCB test must be equal or less than number
of total TC. Otherwise, the following problems may occur:
1/ Redundant polling threads will be created when forwarding cores number
is greater than total TC number.
2/ Two cores would try to use a same queue on a port when Rx/Tx queue
number is greater than the used TC number, which is not allowed.
Fixes: 900550de04 ("app/testpmd: add dcb support")
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Variable total, which may be zero and result in segmentation fault.
This patch fixed it.
Fixes: 9b1249d9ff ("app/testpmd: support dumping socket memory")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The --txpkts command line parameter was silently ignored due to
application was unable to check the Tx queue ring sizes for non
configured ports.
The "set txpkts <len0[,len1]*>" was also rejected if there
was some stopped or /unconfigured port.
This provides the following:
- If fails to get ring size from the port, this can be because port is
not initialized yet, ignore the check and just be sure segment size
won't cause an out of bound access. The port descriptor check will
be done during Tx setup.
- The capability to send single packet is supposed to be very basic
and always supported, the setting segment number to 1 is always
allowed, no check performed
- At the moment of Tx queue setup the descriptor number is checked
against configured segment number
Bugzilla ID: 584
Fixes: 8dae835d88 ("app/testpmd: remove restriction on Tx segments set")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
When txq offload is configured, max rxq is used as the max queue. This
patch fixes it.
Fixes: 74453ac9ef ("app/testpmd: fix queue offload configuration")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch supports display queue state in "show rxq/txq" commands.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch supports the query of the link flow control parameter
on a port.
The command format is as follows:
show port <port_id> flow_ctrl
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Add the create/del policy CLIs to support actions per color.
The CLIs are:
Create: add port meter policy (port_id) (policy_id) g_actions (actions)
y_actions (actions) r_actions (actions)
Delete: del port meter policy (port_id) (policy_id)
Examples:
testpmd> add port meter policy 0 1 g_actions rss / end y_actions end
r_actions drop / end
testpmd> del port meter policy 0 1
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, the flow meter policy does not support multiple actions
per color; also the allowed action types per color are very limited.
In addition, the policy cannot be pre-defined.
Due to the growing in flow actions offload abilities there is a potential
for the user to use variety of actions per color differently.
This new meter policy API comes to allow this potential in the most ethdev
common way using rte_flow action definition.
A list of rte_flow actions will be provided by the user per color
in order to create a meter policy.
In addition, the API forces to pre-define the policy before
the meters creation in order to allow sharing of single policy
with multiple meters efficiently.
meter_policy_id is added into struct rte_mtr_params.
So that it can get the policy during the meters creation.
Allow coloring the packet using a new rte_flow_action_color
as could be done by the old policy API.
Add two common policy template as macros in the head file.
The next API function were added:
- rte_mtr_meter_policy_add
- rte_mtr_meter_policy_delete
- rte_mtr_meter_policy_update
- rte_mtr_meter_policy_validate
The next struct was changed:
- rte_mtr_params
- rte_mtr_capabilities
The next API was deleted:
- rte_mtr_policer_actions_update
To support this API the following app were changed:
app/test-flow-perf: clean meter policer
app/testpmd: clean meter policer
To support this API the following drivers were changed:
net/softnic: support meter policy API
1. Cleans meter rte_mtr_policer_action.
2. Supports policy API to get color action as policer action did.
The color action will be mapped into rte_table_action_policer.
net/mlx5: clean meter creation management
Cleans and breaks part of the current meter management
in order to allow better design with policy API.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The command line for testing connection tracking is added. To create
a conntrack object, 3 parts are needed.
set conntrack com peer ...
set conntrack orig scale ...
set conntrack rply scale ...
This will create a full conntrack action structure for the indirect
action. After the indirect action handle of "conntrack" created, it
could be used in the flow creation. Before updating, the same
structure is also needed together with the update command
"conntrack_update" to update the "dir" or "ctx".
After the flow with conntrack action created, the packet should jump
to the next flow for the result checking with conntrack item. The
state is defined with bits and a valid combination could be
supported.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add the new items to support the flow configuration for IP fragment
packets.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
The integrity item allows the application to match
on the integrity of a packet.
Usage example:
match that packet integrity checks are OK. The checks depend on
packet layers. For example ICMP packet will not check L4 level.
flow create 0 ingress pattern integrity value mask 0x01 value spec 0x01
Match that L4 packet is OK - check L2 & L3 & L4 layers:
flow create 0 ingress pattern integrity value mask 0xfe value spec 0xfe
Signed-off-by: Ori Kam <orika@nvidia.com>
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds link autoneg status display in port_infos_display().
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Right now, rte_flow_shared_action_* APIs are used for some shared
actions, like RSS, count. The shared action should be created before
using it inside a flow. These shared actions sometimes are not
really shared but just some indirect actions decoupled from a flow.
The new functions rte_flow_action_handle_* are added to replace
the current shared functions rte_flow_shared_action_*.
There are two types of flow actions:
1. the direct (normal) actions that could be created and stored
within a flow rule. Such action is tied to its flow rule and
cannot be reused.
2. the indirect action, in the past, named shared_action. It is
created from a direct actioni, like count or rss, and then used
in the flow rules with an object handle. The PMD will take care
of the retrieve from indirect action to the direct action
when it is referenced.
The indirect action is accessed (update / query) w/o any flow rule,
just via the action object handle. For example, when querying or
resetting a counter, it could be done out of any flow using this
counter, but only the handle of the counter action object is
required.
The indirect action object could be shared by different flows or
used by a single flow, depending on the direct action type and
the real-life requirements.
The handle of an indirect action object is opaque and defined in
each driver and possibly different per direct action type.
The old name "shared" is improper in a sense and should be replaced.
Since the APIs are changed from "rte_flow_shared_action*" to the new
"rte_flow_action_handle*", the testpmd application code and command
line interfaces also need to be updated to do the adaption.
The testpmd application user guide is also updated. All the "shared
action" related parts are replaced with "indirect action" to have a
correct explanation.
The parameter of "update" interface is also changed. A general
pointer will replace the rte_flow_action struct pointer due to the
facts:
1. Some action may not support fields updating. In the example of a
counter, the only "update" supported should be the reset. So
passing a rte_flow_action struct pointer is meaningless and
there is even no such corresponding action struct. What's more,
if more than one operations should be supported, for some other
action, such pointer parameter may not meet the need.
2. Some action may need conditional or partial update, the current
parameter will not provide the ability to indicate which part(s)
to update.
For different types of indirect action objects, the pointer could
either be the same of rte_flow_action* struct - in order not to
break the current driver implementation, or some wrapper
structures with bits as masks to indicate which part to be
updated, depending on real needs of the corresponding direct
action. For different direct actions, the structures of indirect
action objects updating will be different.
All the underlayer PMD callbacks will be moved to these new APIs.
The RTE_FLOW_ACTION_TYPE_SHARED is kept for now in order not to
break the ABI. All the implementations are changed by using
RTE_FLOW_ACTION_TYPE_INDIRECT.
Since the APIs are changed from "rte_flow_shared_action*" to the new
"rte_flow_action_handle*" and the "update" interface's 3rd input
parameter is changed to generic pointer, the mlx5 PMD that uses these
APIs needs to do the adaption to the new APIs as well.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
As with the lib and drivers directories, we can use "continue" keyword to
reduce the indentation level of the majority of the foreach block. At the
same time, we can also replace tab indentation with spaces.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Currently, when the user sets force link speed through 'link_speeds',
bit(0) of 'link_speeds' is not set to 1(ETH_LINK_SPEED_FIXED),
which conflicts with the definition.
Fixes: 88fbedcd5e ("app/testpmd: move speed and duplex parsing in a function")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for single flow dump.
The CLIs to dump one rule: flow dump PORT rule ID
to dump all: flow dump PORT all
Examples:
testpmd> flow dump 0 all
testpmd> flow dump 0 rule 0
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Previous implementations support dump all the flows. Add new arg
rte_flow in rte_flow_dev_dump to dump one flow.
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
add meter profile packet_mode to the ethernet device.
One example:
add port meter profile rfc2697 (port_id) (profile_id)
(cir) (cbs) (ebs) (packet_mode)
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In current design, legacy parser rte_devargs_parse() saved scratch
buffer to devargs.args while new parser rte_devargs_layers_parse() saved
to devargs.data. Code using devargs had to know the difference and
cleaned up memory accordingly - error prone.
This patch unifies scratch buffer to data field, introduces
rte_devargs_reset() function to wrap the memory clean up logic.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Reviewed-by: Gaetan Rivet <grive@u256.net>
Add support for rte_flow_action_nvge_encap as a sample action.
The example of test-pmd command:
1. set nvgre ip-version ... tni ... ip-src ... ip-dst ...
set raw_encap 1 eth src... / ipv4... /...
set sample_actions 2 nvgre / port_id id 0 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 2 / raw_encap index 1 / port_id id 0...
The flow will result in all the matched egress packets will be
encapsulated and sent to wire, and also mirrored the packets
using NVGRE encapsulation data and sent to wire.
Signed-off-by: Salem Sol <salems@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for rte_flow_action_vxlan_encap as a sample action.
The example of test-pmd command:
1. set vxlan ip-version ... vni ... udp-src ...
set raw_encap 1 eth src.../ ipv4.../...
set sample_actions 2 vxlan_encap / port_id id 0 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 2 / raw_encap index 1 / port_id id 0...
The flow will result in all the matched egress packets will be
encapsulated and sent to wire, and also mirrored the packets
using VXLAN encapsulation data and sent to wire.
Signed-off-by: Salem Sol <salems@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
With the current code the VXLAN/NVGRE parsing routine
stored the configuration of the header on stack, this
might lead to overwriting the data on the stack.
Currently having VXLAN/NVGRE encap as sample actions
is done using RAW_ENCAP, for example:
1. set raw_encap 1 eth src.../ vxlan vni.../ ipv4.../ ...
set sample_actions 0 raw_encap / port_id id 0 / end
flow create 0 ... pattern eth / end actions
sample ration 1 index 0 / jump group 1 / end
The goal is to utilize the rte_flow_action_vxlan_encap
and rte_flow_action_nvgre_encap for sample actions.
This patch prepares storing the external data of vxlan and
nvgre encap into global data as a pre-step to supporting
vxlan and nvgre encap as a sample actions.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The options help text was including an incomplete and redundant
summary of the options before explaining each. The summary is dropped.
The details of the option --hairpin-mode had an extra space,
breaking the alignment with the next line.
There were some mismatches between options in the usage text
sed -rn 's/.*\(" *--([a-z-]*)[=: ].*/\1/p' app/test-pmd/parameters.c
and the options declared in lgopts array
sed -rn 's/.*\{.*"(.*)",.*,.*,.*},.*/\1/p' app/test-pmd/parameters.c
The misses were:
--no-numa
--enable-scatter
--tx-ip
--tx-udp
--noisy-lkup-num-reads-writes
The option --ports was not implemented.
Fixes: 01817b10d2 ("app/testpmd: change hairpin queues setup")
Fixes: 3c156061b9 ("app/testpmd: add noisy neighbour forwarding mode")
Fixes: bf5b2126bf ("app/testpmd: add ability to set Tx IP and UDP parameters")
Fixes: 0499793854 ("app/testpmd: add scatter enabling option")
Fixes: 999b2ee0fe ("app/testpmd: enable NUMA support by default")
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Bing Zhao <bingz@nvidia.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Some applications were printing useless messages with rte_exit()
after showing the help. Using exit() is enough in this case.
Some applications were using a redundant printf or fprintf() before
calling rte_exit(). The messages are unified in a single rte_exit().
Some rte_exit() calls were missing a line feed or returning a wrong code.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
This patch adds more err info for Tx/Rx descriptor query command.
Fixes: fae9aa717d ("app/testpmd: support checking descriptor status")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
For NVGRE protocol, the default value of 'c_k_s_rsvd0_ver'
must be 0x2000, and protocol type must be 0x6558 in the NVGRE
header.
This patch updates these two configurations while parsing the nvgre
encap.
Fixes: dcd962fc6b ("app/testpmd: add NVGRE encap/decap")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
1/ Improve portability by avoiding use of non-standard 'uint'.
Use uint8_t for hash_key_len as rss_key_len is a uint8_t type.
This solves following build error when building with musl libc:
app/test-pmd/testpmd.h:813:29: error: unknown type name 'uint'
2/ In musl libc, stdout is of type (FILE * const).
Because of the const qualifier, a dark magic cast
must be achieved through uintptr_t.
Fixes: 8205e241b2 ("app/testpmd: add missing type to RSS hash commands")
Fixes: e977e4199a ("app/testpmd: add commands to load/unload BPF filters")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Reviewed-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
This patch checks return value for rte_eth_dev_info_get() in show_macs().
Coverity issue: 353629
Fixes: e1d44d0ad6 ("app/testpmd: show MAC addresses added to a port")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Provide a bit more diagnostics information when port start fails.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
