Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, if dev_configure is not called or fails to be called, users
can still call dev_start successfully. So it is necessary to have a flag
which indicates whether the device is configured, to control whether
dev_start can be called and eliminate dependency on user invocation order.
The flag stored in "struct rte_eth_dev_data" is more reasonable than
"enum rte_eth_dev_state". "enum rte_eth_dev_state" is private to the
primary and secondary processes, and can be independently controlled.
However, the secondary process does not make resource allocations and
does not call dev_configure(). These are done by the primary process
and can be obtained or used by the secondary process. So this patch
adds a "dev_configured" flag in "rte_eth_dev_data", like "dev_started".
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
libabigail raised a warning on this change.
This change is fine wrt ABI as far as we understand, but we can't
express an exception rule (see libabigail bug #28060) to waive the
changes only in this part of the rte_eth_dev_data struct.
The solution for now is to globally waive any change on the
rte_eth_dev_data structure.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Currently, upper-layer application could get queue state only
through pointers such as dev->data->tx_queue_state[queue_id],
this is not the recommended way to access it. So this patch
add get queue state when call rte_eth_rx_queue_info_get and
rte_eth_tx_queue_info_get API.
Note: After add queue_state field, the 'struct rte_eth_rxq_info' size
remains 128B, and the 'struct rte_eth_txq_info' size remains 64B, so
it could be ABI compatible.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In case an event from a previous stage is required to be forwarded
to a crypto adapter and PMD supports internal event port in crypto
adapter, exposed via capability
RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD, we do not have
a way to check in the API rte_event_enqueue_burst(), whether it is
for crypto adapter or for eth tx adapter.
Hence we need a new API similar to rte_event_eth_tx_adapter_enqueue(),
which can send to a crypto adapter.
Note that RTE_EVENT_TYPE_* cannot be used to make that decision,
as it is meant for event source and not event destination.
And event port designated for crypto adapter is designed to be used
for OP_NEW mode.
Hence, in order to support an event PMD which has an internal event port
in crypto adapter (RTE_EVENT_CRYPTO_ADAPTER_OP_FORWARD mode), exposed
via capability RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_FWD,
application should use rte_event_crypto_adapter_enqueue() API to enqueue
events.
When internal port is not available(RTE_EVENT_CRYPTO_ADAPTER_OP_NEW mode),
application can use API rte_event_enqueue_burst() as it was doing earlier,
i.e. retrieve event port used by crypto adapter and bind its event queues
to that port and enqueue events using the API rte_event_enqueue_burst().
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In cryptography, a block cipher is a deterministic algorithm operating
on fixed-length groups of bits, called blocks.
A block cipher consists of two paired algorithms, one for encryption
and the other for decryption. Both algorithms accept two inputs:
an input block of size n bits and a key of size k bits; and both yield
an n-bit output block. The decryption algorithm is defined to be the
inverse function of the encryption.
For AES standard the block size is 16 bytes.
For AES in XTS mode, the data to be encrypted\decrypted does not have to
be multiple of 16B size, the unit of data is called data-unit.
The data-unit size can be any size in range [16B, 2^24B], so, in this
case, a data stream is divided into N amount of equal data-units and
must be encrypted\decrypted in the same data-unit resolution.
For ABI compatibility reason, the size is limited to 64K (16-bit field).
The new field dataunit_len is inserted in a struct padding hole,
which is only 2 bytes long in 32-bit build.
It could be moved and extended later during an ABI-breakage window.
The current cryptodev API doesn't allow the user to select a specific
data-unit length supported by the devices.
In addition, there is no definition how the IV is detected per data-unit
when single operation includes more than one data-unit.
That causes applications to use single operation per data-unit even though
all the data is continuous in memory what reduces datapath performance.
Add a new feature flag to support multiple data-unit sizes, called
RTE_CRYPTODEV_FF_CIPHER_MULTIPLE_DATA_UNITS.
Add a new field in cipher capability, called dataunit_set,
where the devices can report the range of the supported data-unit sizes.
Add a new cipher transformation field, called dataunit_len, where the user
can select the data-unit length for all the operations.
All the new fields do not change the size of their structures,
by filling some struct padding holes.
They are added as exceptions in the ABI check file libabigail.abignore.
Using a bitmap to report the supported data-unit sizes capability allows
the devices to report a range simply as same as the user to read it
simply. also, thus sizes are usually common and probably will be shared
among different devices.
Signed-off-by: Matan Azrad <matan@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Now that the ethernet driver dev_ops structure definition is not
exported anymore, there is no need for an exception.
abidiff will only consider structures defined in the installed headers
(passed with --headers-dirX options).
Fixes: df96fd0d73 ("ethdev: make driver-only headers private")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds driver flag in vdev bus driver so that
vdev drivers can require VA IOVA mode to be used, which
for example the case of Virtio-user PMD.
The patch implements the .get_iommu_class() callback, that
is called before devices probing to determine the IOVA mode
to be used, and adds a check right before the device is
probed to ensure compatible IOVA mode has been selected.
It also adds a ABI exception rule to accommodate with an
update on the driver registration API
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Update the ignore entry for crytodev to use named fields
instead of bit positions.
It is allowing changes between the last field (attached) in ABI 21.0,
and the end of the padded struct in ABI 21.
Fixes: 1c3ffb9559 ("cryptodev: add enqueue and dequeue callbacks")
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Use the same interpreter to run pmdinfogen as for other build scripts.
Adjust wrapper script accordingly and also don't suppress stderr from ar
and pmdinfogen. Add configure-time check for elftools Python module for
Unix hosts.
Add pyelftools to CI configuration and build requirements for Linux and
FreeBSD. Windows targets are not currently using pmdinfogen.
Suppress ABI warnings about generated PMD information strings.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Jie Zhou <jizh@microsoft.com>
This patch adds APIs to add/remove callback functions on crypto
enqueue/dequeue burst. The callback function will be called for
each burst of crypto ops received/sent on a given crypto device
queue pair.
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add a simple API to allow getting the monitor conditions for
power-optimized monitoring of the Rx queues from the PMD, as well as
release notes information.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Use C11 atomic builtins with explicit ordering instead of rte_atomic
ops which enforce unnecessary barriers on aarch64.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Suggested-by: Dodji Seketeli <dodji@redhat.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The event status is defined as a volatile variable and shared between
threads. Use C11 atomic built-ins with explicit ordering instead of
rte_atomic ops which enforce unnecessary barriers on aarch64.
The event status has been cleaned up by the compare-and-swap operation
when we free the event data, so there is no need to set it to invalid
after that.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Harman Kalra <hkalra@marvell.com>
Having a special versioning for experimental/internal libraries put a
additional maintenance cost while this status is already announced in
MAINTAINERS and the library headers/documentation.
Following discussions and vote at 05/20 TB meeting [1], use a single
versioning for all libraries in DPDK.
Note: for the ABI check, an exception [2] had been added when tweaking
this special versioning [3].
Prefer explicit libabigail rules (which will be dropped in 20.11).
1: https://mails.dpdk.org/archives/dev/2020-May/168450.html
2: https://git.dpdk.org/dpdk/commit/?id=23d7ad5db41c
3: https://git.dpdk.org/dpdk/commit/?id=ec2b8cd7ed69
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
This patch also removes two symbols, which are not to be exported.
rte_dpaa_mem_ptov - static inline in the headerfile
fman_ccsr_map_fd - local shared variable.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
This patch also removes two symbols, which were not used
anywhere else i.e. rte_fslmc_vfio_dmamap & dpaa2_get_qbman_swp
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Move mlx5 symbols in the map file to the INTERNAL section and add
__internal tags to their definitions.
Those symbols were exported in 20.02 and now (20.05) they are removed.
Avoid ABI comparison issues between 20.05/20.08 and 20.02 by adding the
suppress_file directive to libabigail.abignore file. This directive will
prevent loading mlx5 common symbols and no comparison will be performed.
In addition move symbols from the EXPERIMENTAL section to the INTERNAL
section.
Fixes: 7b4f1e6bd3 ("common/mlx5: introduce common library")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Move the internal symbols to INTERNAL sections so that any
change in them is not reported as ABI breakage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Move the internal symbols to INTERNAL sections so that any
change in them is not reported as ABI breakage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: David Marchand <david.marchand@redhat.com>
This patch adds versioned function rte_cryptodev_info_get()
to prevent some issues with ABI policy.
Node v21 works in same way as before, returning driver capabilities
directly to the API caller. These capabilities may include new elements
not part of the v20 ABI.
Node v20 function maintains compatibility with v20 ABI releases
by stripping out elements not supported in v20 ABI. Because
rte_cryptodev_info_get is called by other API functions,
rte_cryptodev_sym_capability_get function is versioned the same way.
Fixes: b922dbd38c ("cryptodev: add ChaCha20-Poly1305 AEAD algorithm")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds CPU flags which will enable the detection of ISA
features available on more recent x86 based CPUs.
The CPUID leaf information can be found in
Table 1-2. "Information Returned by CPUID Instruction" of this document:
https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf
The following CPU flags are added in this patch:
- AVX-512 doubleword and quadword instructions.
- AVX-512 integer fused multiply-add instructions.
- AVX-512 conflict detection instructions.
- AVX-512 byte and word instructions.
- AVX-512 vector length instructions.
- AVX-512 vector bit manipulation instructions.
- AVX-512 vector bit manipulation 2 instructions.
- Galois field new instructions.
- Vector AES instructions.
- Vector carry-less multiply instructions.
- AVX-512 vector neural network instructions.
- AVX-512 for bit algorithm instructions.
- AVX-512 vector popcount instructions.
- Cache line demote instructions.
- Direct store instructions.
- Direct store 64B instructions.
- AVX-512 two register intersection instructions.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Change references to ABI 20.0.1 to use ABI v21, see
https://doc.dpdk.org/guides/contributing/abi_policy.html#general-guidelines
"Major ABI versions are declared no more frequently than yearly.
Compatibility with the major ABI version is mandatory in subsequent
releases until a new major ABI version is declared."
Combined ABI policy and versioning in maintainers, add map files to the
filter to more closely monitor future ABI changes.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Ignore the internal version ABI check, this kind of ABI is used only
by drivers and libraries.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
One of the reasons to destroy a flow is the fact that no packet matches
the flow for "timeout" time.
For example, when TCP\UDP sessions are suddenly closed.
Currently, there is not any DPDK mechanism for flow aging and the
applications use their own ways to detect and destroy aged-out flows.
The flow aging implementation need include:
- A new rte_flow action: RTE_FLOW_ACTION_TYPE_AGE to set the timeout and
the application flow context for each flow.
- A new ethdev event: RTE_ETH_EVENT_FLOW_AGED for the driver to report
that there are new aged-out flows.
- A new rte_flow API: rte_flow_get_aged_flows to get the aged-out flows
contexts from the port.
- Support input flow aging command line in Testpmd.
The new event type addition in the enum is flagged as an ABI breakage,
so an ignore rule is added for these reasons:
- It is not changing value of existing types (except MAX)
- The new value is not used by existing API if the event is not
registered
In general, it is safe adding new ethdev event types at the end of the
enum, because of event callback registration mechanism.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Introduce relaxed tail sync (RTS) mode for MT ring synchronization.
Aim to reduce stall times in case when ring is used on
overcommited cpus (multiple active threads on the same cpu).
The main difference from original MP/MC algorithm is that
tail value is increased not by every thread that finished enqueue/dequeue,
but only by the last one.
That allows threads to avoid spinning on ring tail value,
leaving actual tail value change to the last thread in the update queue.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
For normal developers, those checks are disabled.
Enabling them requires a configuration that will trigger the ABI dumps
generation as part of the existing devtools/test-build.sh and
devtools/test-meson-builds.sh scripts.
Those checks are enabled in the CI for the default meson options on x86
and aarch64 so that proposed patches are validated via our CI robot.
A cache of the ABI is stored in travis jobs to avoid rebuilding too
often.
Checks can be informational only, by setting ABI_CHECKS_WARN_ONLY when
breaking the ABI in a future release.
Explicit suppression rules have been added on internal structures
exposed to crypto drivers as the current ABI policy does not apply to
them.
This could be improved in the future by carefully splitting the headers
content with application and driver "users" in mind.
We currently have issues reported for librte_crypto recent changes for
which suppression rules have been added too.
Mellanox glue libraries are explicitly skipped as they are not part of
the application ABI.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
