RSS action with only one destination queue and no specific settings
for hash types and key does not require dedicated RSS context and
may be simplified to QUEUE action.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Fix internal report on port specific offload capabilities to be 0 (no
capabilities). Before this commit port capabilities were a clone of queue
capabilities, however the current TAP offload capabilities (e.g.
checksum calculation) are per queue and are not specific per port.
This commit fixes an internal validation check for new configured
queue offloads.
The port capability API keeps reporting all queue capabilities as port
capabilities.
Fixes: 95ae196ae1 ("net/tap: use new Rx offloads API")
Fixes: 818fe14a98 ("net/tap: use new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
mask is a simple bit-mask applied before interpreting the contents
of spec and last.
Fixes: a9825ccf5b ("net/sfc: support flow API filters")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Add support for virtual function representor ports to the ixgbe PF
driver. When SR-IOV virtual functions devices are enabled a
corresponding representor port for each VF can be enabled in the
process in which the ixgbe PMD is running within, by specifying the
representor devargs with the list of VF ports that representors
are to be created for.
An example of the devargs which would create VF representor for virtual
functions 0,2,4,5,6 and 7 is:
-w DBDF,representor=[0,2,4-7]
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for virtual function representor ports to the i40e PF
driver. When SR-IOV virtual functions devices are enabled a
corresponding representor port for each VF can be enabled, in the
process in which the i40e PMD is running, by specifying the
representor devargs with the list of VF ports that representors
are to be created for.
An example of the devargs which would create VF representor for virtual
functions 0,2,4,5,6 and 7 is:
-w DBDF,representor=[0,2,4-7]
and to just specify a single representor on virtual function 3 (switch
port id):
-w DBDF,representor=3
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tunnel w/o tunnel id pattern could match any non-tunneled packet,
this patch allowed tunnel w/o tunnel id pattern after proper outer spec.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Dump verb flow detail including flow spec type and size for debugging
purpose.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tunnel RSS level of flow RSS action offers user a choice to do RSS hash
calculation on inner or outer RSS fields. Testpmd flow command examples:
GRE flow inner RSS:
flow create 0 ingress pattern eth / ipv4 proto is 47 / gre / end
actions rss queues 1 2 end level 1 / end
GRE tunnel flow outer RSS:
flow create 0 ingress pattern eth / ipv4 proto is 47 / gre / end
actions rss queues 1 2 end level 0 / end
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch split out flow RSS hash field handling logic to dedicate
function.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Once tunnel packet type(RTE_PTYPE_TUNNEL_xxx) identified,
PKT_RX_IP_CKSUM_XXX and PKT_RX_L4_CKSUM_XXX represent checksum result of
inner headers, outer L3 and L4 header checksum are always valid as soon
as tunnel identified. If no tunnel identified, PKT_RX_IP_CKSUM_XXX and
PKT_RX_L4_CKSUM_XXX represent checksum result of outer L3 and L4
headers.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch introduced tunnel type identification based on flow rules.
If flows of multiple tunnel types built on same queue, no tunnel type
will be returned. User application could use bits in flow mark as tunnel
type identifier.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch support L3 VXLAN, no inner L2 header comparing to standard
VXLAN protocol. L3 VXLAN using specific overlay UDP destination port to
discriminate against standard VXLAN, device parameter and FW has to be
configured to support it:
sudo mlxconfig -d <device> -y s IP_OVER_VXLAN_EN=1
sudo mlxconfig -d <device> -y s IP_OVER_VXLAN_PORT=<port>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch supports new 16 Verbs flow priorities by trying to create a
simple flow of priority 15. If 16 priorities not available, fallback to
traditional 8 priorities.
Verb priority mapping:
8 priorities >=16 priorities
Control flow: 4-7 8-15
User normal flow: 1-3 4-7
User tunnel flow: 0-2 0-3
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The current code has the following drawbacks:
- It is assumed that TCP 4-tuple hash is
always supported, which is untrue in
the case of packed stream FW variant.
- The driver is unaware of UDP hash support
available with latest firmware.
In order to cope with the mentioned issues, this
patch implements the new approach to handle hash
settings using the advanced EFX RSS interface.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS handling will need more sophisticated fields
in the adapter context storage in future patches.
This patch groups existing fields in a dedicated
structure and updates the rest of the code.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS is one of the most valuable features in the
driver, and one would hardly need to disable it
at build time. This patch withdraws unnecessary
conditionals for RSS snippets.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
One may submit advanced RSS settings as part of
rte_eth_conf to customise RSS configuration from
the very beginning. Currently the driver does not
check that piece of settings and proceeds with
default choices for RSS hash functions and RSS key.
This patch implements the required processing.
Fixes: 4ec1fc3ba8 ("net/sfc: add basic stubs for RSS support on driver attach")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Packed stream firmware variant on EF10 adapters has a
number of properties which must be taken into account:
- Only one exclusive RSS context is available per port.
- Only IP addresses can contribute to the hash value.
Huntington and Medford have one more limitation which
is important for the drivers capable of packed stream:
- Hash algorithm is non-standard (i.e. non-Toeplitz).
This implies XORing together source + destination
IP addresses (or last four bytes in the case of IPv6)
and using the result as the input to a Toeplitz hash.
This patch provides a number of improvements in order
to treat the mentioned limitations in the common code.
If the firmware variant is packed stream, the list of
supported hash tuples will include less variants, and
the maximum number of RSS contexts will be set to one.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Modern firmwares on EF10 adapters have support for
more traffic classes eligible for hash computation.
Also, it has become possible to adjust hashing per
individual class and select distinct packet fields
which will be able to contribute to the hash value.
This patch adds support for the mentioned features.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Currently, libefx has no support for additional RSS modes
available with later controllers. In order to support this,
libefx should be able to list available hash configurations.
This patch provides basic infrastructure for the new interface.
The client drivers will be able to query the list of supported
hash configurations for a particular hash algorithm. Also, it
will be possible to configure hashing by means of new definitions.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
clang 4.0.1-6 on Ubuntu generates false positive warning that shift
is negative. It is done regardless of the fact that the branch is
not taken because of previous check.
The warning is generate in EFX_INSERT_NATIVE32 used by
EFX_INSERT_FIELD_NATIVE32. All similar cases are fixed as well.
It is undesirable to suppress the warning completely.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Contrary to all other pattern items, these are inconsistently documented as
affecting traffic instead of simply matching its origin, without provision
for the latter.
This commit clarifies documentation and updates PMDs since the original
behavior now has to be explicitly requested using the new transfer
attribute.
It breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_validate()
Impacted PMDs are bnxt and i40e, for which the VF pattern item is now only
supported when a transfer attribute is also present.
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This new attribute enables applications to create flow rules that do not
simply match traffic whose origin is specified in the pattern (e.g. some
non-default physical port or VF), but actively affect it by applying the
flow rule at the lowest possible level in the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
TPID handling in rte_flow VLAN and E_TAG pattern item definitions is not
consistent with the normal stacking order of pattern items, which is
confusing to applications.
Problem is that when followed by one of these layers, the EtherType field
of the preceding layer keeps its "inner" definition, and the "outer" TPID
is provided by the subsequent layer, the reverse of how a packet looks like
on the wire:
Wire: [ ETH TPID = A | VLAN EtherType = B | B DATA ]
rte_flow: [ ETH EtherType = B | VLAN TPID = A | B DATA ]
Worse, when QinQ is involved, the stacking order of VLAN layers is
unspecified. It is unclear whether it should be reversed (innermost to
outermost) as well given TPID applies to the previous layer:
Wire: [ ETH TPID = A | VLAN TPID = B | VLAN EtherType = C | C DATA ]
rte_flow 1: [ ETH EtherType = C | VLAN TPID = B | VLAN TPID = A | C DATA ]
rte_flow 2: [ ETH EtherType = C | VLAN TPID = A | VLAN TPID = B | C DATA ]
While specifying EtherType/TPID is hopefully rarely necessary, the stacking
order in case of QinQ and the lack of documentation remain an issue.
This patch replaces TPID in the VLAN pattern item with an inner
EtherType/TPID as is usually done everywhere else (e.g. struct vlan_hdr),
clarifies documentation and updates all relevant code.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Summary of changes for PMDs that implement ETH, VLAN or E_TAG pattern
items:
- bnxt: EtherType matching is supported with and without VLAN, but TPID
matching is not and triggers an error.
- e1000: EtherType matching is only supported with the ETHERTYPE filter,
which does not support VLAN matching, therefore no impact.
- enic: same as bnxt.
- i40e: same as bnxt with existing FDIR limitations on allowed EtherType
values. The remaining filter types (VXLAN, NVGRE, QINQ) do not support
EtherType matching.
- ixgbe: same as e1000, with additional minor change to rely on the new
E-Tag macro definition.
- mlx4: EtherType/TPID matching is not supported, no impact.
- mlx5: same as bnxt.
- mvpp2: same as bnxt.
- sfc: same as bnxt.
- tap: same as bnxt.
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Fixes: 99e7003831 ("net/ixgbe: parse L2 tunnel filter")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS hash types (ETH_RSS_* macros defined in rte_ethdev.h) describe the
protocol header fields of a packet that must be taken into account while
computing RSS.
When facing encapsulated (e.g. tunneled) packets, there is an ambiguity as
to whether these should apply to inner or outer packets. Applications need
the ability to tell exactly "where" RSS must be performed.
This is addressed by adding encapsulation level information to the RSS flow
action. Its default value is 0 and stands for the usual unspecified
behavior. Other values provide a specific encapsulation level.
Contrary to the change announced by commit 676b605182 ("doc: announce
ethdev API change for RSS configuration"), this patch does not affect
struct rte_eth_rss_conf but struct rte_flow_action_rss as the former is not
used anymore by the RSS flow action. ABI impact is therefore limited to
rte_flow.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
By definition, RSS involves some kind of hash algorithm, usually Toeplitz.
Until now it could not be modified on a flow rule basis and PMDs had to
always assume RTE_ETH_HASH_FUNCTION_DEFAULT, which remains the default
behavior when unspecified (0).
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since its inception, the rte_flow RSS action has been relying in part on
external struct rte_eth_rss_conf for compatibility with the legacy RSS API.
This structure lacks parameters such as the hash algorithm to use, and more
recently, a method to tell which layer RSS should be performed on [1].
Given struct rte_eth_rss_conf will never be flexible enough to represent a
complete RSS configuration (e.g. RETA table), this patch supersedes it by
extending the rte_flow RSS action directly.
A subsequent patch will add a field to use a non-default RSS hash
algorithm. To that end, a field named "types" replaces the field formerly
known as "rss_hf" and standing for "RSS hash functions" as it was
confusing. Actual RSS hash function types are defined by enum
rte_eth_hash_function.
This patch updates all PMDs and example applications accordingly.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
[1] commit 676b605182 ("doc: announce ethdev API change for RSS
configuration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch replaces C99-style flexible arrays in struct rte_flow_action_rss
and struct rte_flow_item_raw with standard pointers to the same data.
They proved difficult to use in the field (e.g. no possibility of static
initialization) and unsuitable for C++ applications.
Affected PMDs and examples are updated accordingly.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch makes the following changes to flow rule actions:
- List order now matters, they are redefined as performed first to last
instead of "all simultaneously".
- Repeated actions are now supported (e.g. specifying QUEUE multiple times
now duplicates traffic among them). Previously only the last action of
any given kind was taken into account.
- No more distinction between terminating/non-terminating/meta actions.
Flow rules themselves are now defined as always terminating unless a
PASSTHRU action is specified.
These changes alter the behavior of flow rules in corner cases in order to
prepare the flow API for actions that modify traffic contents or properties
(e.g. encapsulation, compression) and for which order matter when combined.
Previously one would have to do so through multiple flow rules by combining
PASSTRHU with priority levels, however this proved overly complex to
implement at the PMD level, hence this simpler approach.
This breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_validate()
PMDs with rte_flow support are modified accordingly:
- bnxt: no change, implementation already forbids multiple actions and does
not support PASSTHRU.
- e1000: no change, same as bnxt.
- enic: modified to forbid redundant actions, no support for default drop.
- failsafe: no change needed.
- i40e: no change, implementation already forbids multiple actions.
- ixgbe: same as i40e.
- mlx4: modified to forbid multiple fate-deciding actions and drop when
unspecified.
- mlx5: same as mlx4, with other redundant actions also forbidden.
- sfc: same as mlx4.
- tap: implementation already complies with the new behavior except for
the default pass-through modified as a default drop.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add new callbacks for eth_dev_ops of i40e to get the information
and data of plugin module eeprom.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add new callbacks for eth_dev_ops of e1000 to get the information and
data of plugin module EEPROM.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add new callbacks for eth_dev_ops of ixgbe to get the information
and data of plugin module eeprom.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The basic operations for ports enumeration should not be
considered as experimental in DPDK 18.05.
The iterator RTE_ETH_FOREACH_DEV was introduced in DPDK 17.05.
It uses the function the rte_eth_find_next_owned_by() to get
only ownerless ports. Its API can be considered stable.
So the flag experimental is removed from rte_eth_find_next_owned_by().
The flag experimental is removed from rte_eth_dev_count_avail()
which is the new name of the old function rte_eth_dev_count().
The flag experimental is set to rte_eth_dev_count_total()
in the .c file for consistency with the declaration in the .h file.
A lot of internal applications are fixed to not allow experimental API.
Fixes: 8728ccf376 ("fix ethdev ports enumeration")
Fixes: d9a42a69fe ("ethdev: deprecate port count function")
Fixes: e70e26861e ("net/mvpp2: fix build")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: David Marchand <david.marchand@6wind.com>
Change max inline header length to 192B to allow IPv6 VXLAN TSO headers
and header with options that more than 128B.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This commit adds support for generic tunnel TSO and checksum offload.
PMD will compute the inner/outer headers offset according to the
mbuf fields. Hardware will do calculation based on offsets and types.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Separate TSO function to make logic of mlx5_tx_burst clear.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Move some code in DPDK callbacks to add/remove MAC addresses to internal
function. This modification will be necessary to handle implement the
devop set_mc_addr_list.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
These drivers never attempt link speed negotiation. Change link_autoneg
value to ETH_LINK_FIXED to be more accurate and consistent between PMDs.
Fixes: 1e3a958f40 ("ethdev: fix link autonegotiation value")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
build error:
.../dpdk/drivers/net/tap/rte_eth_tap.c(598):
error #279: controlling expression is constant
RTE_ASSERT(!"unsupported request type: must not happen");
Although RTE_ASSERT helps debugging this issue when assert enabled,
constant expression in assert means this path can be taken during
runtime and there is no protection against it when assert is disabled.
Adding error log and error return back, replacing RTE_ASSERT.
Fixes: 7748a4b441 ("net/tap: add debug messages")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Ethernet devices which are grouped by bonding PMD, aka slaves, are
sharing the same queues and RSS configurations and their Rx burst
functions must be managed by the bonding PMD according to the bonding
architecture.
So, it makes sense to configure the same flow rules for all the bond
slaves to allow consistency in packet flow management.
Add rte flow support to the bonding PMD to manage all flow
configuration to the bonded slaves.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Expose the runtime queue configuration capability and enhance
i40e_dev_[rx|tx]_queue_setup to handle the situation when
device already started.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
PMDs have the responsibility of releasing mbufs sent through xmit burst
function. NFP PMD attaches those sent mbufs to the TX ring structure,
and it is at the next time a specific ring descriptor is going to be
used when the previous linked mbuf, already transmitted at that point,
is released. Those mbufs belonging to a chained mbuf got its own link
to a ring descriptor, and they are released independently of the mbuf
head of that chain.
The problem is how those mbufs are released when the PMD is stopped or
closed. Instead of releasing those mbufs as the xmit functions does,
this is independently of being in a mbuf chain, the code calls
rte_pktmbuf_free which will release not just the mbuf head in that
chain but all the chained mbufs. The loop will try to release those
mbufs which have already been released again when chained mbufs exist.
This patch fixes the problem using rte_pktmbuf_free_seg instead.
Fixes: b812daadad ("nfp: add Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
There is an option to run a non-netvsc device as a netvsc device only
when the "force" parameter is set to 1 in the EAL command line.
Consequently, more than one device may be found to be matching the
"mac" parameter specifying the device.
Prefer netvsc devices to be scanned before any non-netvsc device, even
when the "force" parameter is set.
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
There are now 2 ways to specify a netvsc device by the EAL command
line - either by the interface name or by the MAC address.
The user should not specify a netvsc device using more than 1 way,
Thus, if a device is specified in more than 1 way, the driver stops
to probe it.
Validate it in the driver initialization.
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
