This patch adds the following operations defined in struct eth_dev_ops:
mtu_set, infos_get and fw_version_get for hns3 PMD driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the following mac address related operations defined in
struct eth_dev_ops: mac_addr_add, mac_addr_remove, mac_addr_set
and set_mc_addr_list.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
port reset cause crash when ports are not stopped. Fixed by refusing the
reset when port is not stopped.
Fixes: 97f1e19679 ("app/testpmd: add port reset command")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The ice has the feature to extract protocol fields into flex descriptor
by programming per queue. Currently, the ice PMD will put the protocol
fields into rte_mbuf::udata64 with different type format. Application
can access the protocol fields quickly.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
PF driver supports counting VF adminQ messages. If any VF driver
sends much more adminQ messages to its PF driver in a period of
time, it will trigger the PF's message limitation, then in the
next certain amount of seconds the PF driver will ignore any new
adminQ message from that VF.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Change rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_dev_owner_delete() return value from void to int
and return negative errno values in case of error conditions.
Right now there is only one error case for rte_eth_dev_owner_delete() -
invalid owner, but it still makes sense to return error to catch bugs
in the code which uses the function.
Also update the usage of the function in drivers/netvsc
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_macaddr_get() return value from void to int
and return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_link_get() and rte_eth_link_get_nowait() return value
from void to int and return negative errno values in case of error
conditions.
Return value of link_update callback is ignored since the callback
returns not errors but whether link up status has changed or not.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_xstats_reset() return value from void to int and
return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
CNF95XX SoC part is not available for general availability.
Update the documentation to reflect the status.
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
This patch adds the feature that supports loading DDP package
according to the device serial number. Prior to loading the
default DDP package (ice.pkg), the driver will check for the
presence of a device-specific DDP package with the name containing
64-bit PCIe Device Serial Number (ice-xxxxxxxxxxxxxxxx.pkg)
during initialization. Users can use "lspci -vs" to get the device
serial number.
The pkg search path are /lib/firmware/updates/intel/ice/ddp/
and /lib/firmware/intel/ice/ddp/. If the package exists,
the driver will download it to the device instead of the default
one. The loaded package type (OS default and COMMS) will be
stored in ice_adapter->active_pkg_type. The package version is
stored in ice_hw->active_pkg_ver.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Change rte_eth_dev_info_get() return value from void to int and return
negative errno values in case of error conditions.
Modify rte_eth_dev_info_get() usage across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support to configure drop action in rte_flow
infrastructure and add counter for dropped
packets due to this filter action "rx_gft_filter_drop".
Also, update supported flows and actions in qede guide.
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
This commit adds support for modifying the VID of the outermost VLAN
header already present in the packet.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit adds support for modifying the VLAN ID (VID) field
in an about-to-be-pushed VLAN header.
This feature can only modify the VID field of a new VLAN header yet
to be pushed. It does not support modifying an existing or already
pushed VLAN headers.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit adds support for modifying the VLAN priority (PCP) field
in about-to-be-pushed VLAN header.
This feature can only modify the PCP field of a new VLAN header yet
to be pushed. It does not support modifying an existing or already
pushed VLAN headers.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit adds support for RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN using
direct verbs flow rules.
If present in the flow, The VLAN default values are taken from the
VLAN item configuration.
In this commit only the VLAN TPID value can be set since VLAN
modification actions are not supported yet.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit adds support for RTE_FLOW_ACTION_TYPE_OF_POP_VLAN via
direct verbs flow rules.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The fpga_lte_fec is the only bbdev driver that does not use bbdev in the
name, so modify it to keep consistency with the other bbdev drivers. This
will then allow later simplification due to all drivers using the same
basic naming format.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch improves the performance of AES GCM by using
the Single Pass Crypto Request functionality when running
on GEN3 QAT. Falls back to the classic 2-pass mode on older
hardware.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Test cases for PDCP with scattered input and output
buffers are added for both inplace and out of place scenarios.
1. input SG - output non SG
2. input and output both SG and inplace buffers
3. input and output both SG with different segment sizes
4. input SG and output non-SG
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Adding basic framework to use snow3g f8 and f9 based
ciphering or integrity with direct crypto apis.
This patch does not support any combo usages yet.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds the stateful decompression feature
to the DPDK QAT PMD.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch fixes the aesni-gcm cryptodev documentation by
filling the lacked unsupported chained mbuf description.
Fixes: 6f16aab09a ("crypto/aesni_gcm: migrate to Multi-buffer library")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch removes an unwanted empty line in a sentence.
Fixes: 71afcefbd5 ("doc: update virtio ring size and header size")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Document the packed virtqueue layout support in virtio net PMD.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Document the devargs for virtio-user and also make it clear
that these devargs are only available in virtio-user, i.e. not
supported by the PCI virtio driver.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The virtio_recv_mergeable_pkts_inorder() has been renamed to
virtio_recv_pkts_inorder() and added the non-mergeable support
in below commit.
Fixes: efcda13648 ("net/virtio: add non-mergeable support to in-order path")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The Rx function that will be used when in-order is enabled
should be virtio_recv_mergeable_pkts_inorder() instead of
virtio_xmit_pkts_inorder().
Fixes: 8f3bd7e870 ("net/virtio: add in-order Rx/Tx into selection")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The simple Tx path in virtio has been removed in below commit.
This patch removes an undefined function declaration of simple
Tx and all related descriptions in the doc.
Fixes: 57f818963d ("net/virtio: remove simple Tx path")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The testpmd application provides two sets of commands for RX offload
flags configuration. The purpose of this patch is to eliminate this
duplication by removing the old set of commands:
“port config all crc-strip|scatter|rx-cksum|rx-timestamp|hw-vlan|
hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off”
The other commands set that can be used instead in order to enable
or disable the same RX offloading flags on all RX queues of a port is:
"port config <port_id> rx_offload crc_strip|scatter|ipv4_cksum|
udp_cksum|tcp_cksum|timestamp|vlan_strip|vlan_filter|vlan_extend on|off"
This patch also fixes the "drop-en" command, which enables packets
dropping on all RX queues of all ports when no receive buffers available
“port config all drop-en on|off”
Fixes: 384161e006 ("app/testpmd: adjust on the fly VLAN configuration")
Cc: stable@dpdk.org
Signed-off-by: Flavia Musatescu <flavia.musatescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Start a new release cycle with empty release notes.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch for DPDK Contributor's Guidelines indicates the repos
against which a new PMD should be prepared; for example, for new
network ethernet PMDs it should be dpdk-next-net, and for new crypto
PMDs it should be dpdk-next-crypto. For other new PMDs, the
contributor should refer to the MAINTAINERS file. Though this may seem
obvious, it is not mentioned in DPDK documentation.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Last contribution, last commit closing the release.
Thank you Rami, you will be missed.
It may be needed by the user to limit the LRO session packet size.
In order to allow the above limitation, a new Rx configuration may be
added for the maximum LRO session size.
A new capability may be added too to expose the maximum LRO session size
supported by the port.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add new offload flags ``DEV_RX_OFFLOAD_RSS_HASH`` and
``DEV_RX_OFFLOAD_FLOW_MARK``.
Add new function ``rte_eth_dev_set_supported_ptypes`` to allow application
to set specific ptypes to be updated in ``rte_mbuf::packet_type``
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The function rte_eth_dev_count() was marked as deprecated in DPDK 18.05
in commit d9a42a69fe ("ethdev: deprecate port count function").
It is planned to be removed after the next LTS release.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
void return value is bad for get API (like rte_eth_dev_info-get())
since caller does not know if the function does its job or not and
output value is filled in.
void return value is bad for state changing API (like
rte_eth_promiscuous_enable()) since caller should use get API
to understand if state is really changed.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tell users about upcoming changes to rte_ether_addr and
rte_ether_header.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
New accessors have been introduced to provide the hidden information.
This symbol can now be kept internal.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This symbol has been deprecated for quite some time.
Let's drop it as soon as possible.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This symbol has been deprecated for quite some time.
Let's drop it as soon as possible.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Introduces the possible limitations on maximal Tx queue
size in descriptors if Tx inline data are enabled.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch updates mlx5 documentation in parts:
- txq_inline_min parameter is described in more details,
values are fixed
- maximal amount of segments in multi-segment packets.
Fixes: 38b4b397a5 ("net/mlx5: add Tx configuration and setup")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
Added a note to the getting started guides about patching third
party libraries/dependencies to avoid any known vulnerabilities.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
As legacy filter API "filter_ctrl" is superseded since 2017
by the rte_flow API, and got the deprecated attribute in DPDK 19.05,
it is time to remove the associated features from the matrix.
Not documenting deprecated features as supported will avoid confusion.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add firmware config for MPLS and DevX (required by LRO and DR).
Add a table for queue offloads requirements.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
Some details about libibverbs were missing:
- automatic detection by meson
- main ways to access the device
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
It is not needed to use "console" syntax highlighting
for literal blocks.
The file is easier to read by removing the code-block lines
and simply having double colons in previous line.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
These are simple fixes of punctuation, anchor placement
or wording.
The table format is fixed to avoid having a long line
in the first column.
Fixes: 909be50a34 ("doc: update Mellanox guides and release notes")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
The command mlxconfig was not enough explained and too much verbose
at the same time.
The syntax is now explained in introduction before listing the options,
without repeating the commands.
Some options, which are explained elsewhere in the doc,
are added to this list.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
This patch fixes the default settings for packet size to inline
with Enhanced Multi-Packet Write feature, allowing 256B packets
to be inlined with Out-Of-the-Box settings.
Fixes: 50724e1bba ("net/mlx5: update Tx definitions")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add tested Marvell integrated NIC platforms to v19.08 release note.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fix the following doc build warning by correcting path.
doc/guides/rel_notes/release_18_05.rst:285:
WARNING: unknown document: ../rawdevs/ifpga_rawdev
Fixes: 473c88f9b3 ("drivers/raw: remove rawdev from directory names")
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add tested Intel platforms with Intel NICs to v19.08 release note.
Signed-off-by: Wenjie Li <wenjiex.a.li@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Flow control was not documented as a supported feature
since the first fill of features matrix for mlx drivers.
Flow API and CRC offload flag support in mlx4 were missing in the
feature matrix when they were implemented (see below commits).
Fixes: 46d5736a70 ("net/mlx4: support basic flow items and actions")
Fixes: ce07b1514d ("net/mlx4: fix CRC stripping capability report")
Fixes: e86b85ca75 ("doc: fill nics features matrix for mlx")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
The backup maintainer role is not explicitly used in the file MAINTAINERS.
Listing names in a priority order is preferred and more flexible
than explicit named roles.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The driver names for rawdevs were both different in make and meson builds
and were non-standard in the make version in that some included "rawdev" in
the name while others didn't.
Therefore, for global consistency of naming, we can use "rte_rawdev" rather
than "rte_pmd" for the prefix for the libraries. While most other driver
categories use "rte_pmd" as a prefix, there is precedent for this in the
mempool drivers use "rte_mempool" as a prefix.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The ifpga and skeleton rawdev drivers included "rawdev" in their directory
names, which was superfluous given that they were in the drivers/raw
directory. Shorten the names via this patch.
For meson builds, this will rename the final library .so/.a files
produced, but those will be renamed again later via a patch to
standardize rawdev names.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When IOMMU is not available, /sys/kernel/iommu_groups will not be
populated. This is happening since at least 3.6 when VFIO support
was added. If the directory is empty, EAL should not pick IOVA as
VA as the default IOVA mode.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When LRO offload is configured in Rx queue, the HW may coalesce TCP
packets from same TCP connection into single packet.
In this case the SW should fix the relevant packet headers because
the HW doesn't update them according to the new created packet
characteristics but provides the update values in the CQE.
Add update header code to the regular Rx burst function to support LRO
feature.
Make sure the first mbuf has enough space to include each TCP header,
otherwise the header update may cross mbufs what complicates the
operation too match.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Patch [1] zeroes the mbuf headroom when the port is configured with LRO
because when working with more than one stride per packet the HW cannot
guaranty an headroom in the start stride of each packet.
Change the solution to support mbuf headroom by adding an empty buffer
as the first packet segment, scatter mode must be enabled to support it.
[1] http://patches.dpdk.org/patch/56912/
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Fix license from BSD-2-Clause to BSD-3-Clause since the file was
lost on the driver license change.
Bump copyright year.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Adding support to parse GRE KEY for octeontx2 Flow.
Matching on GRE Key will only work, if checksum and routing
bits in the GRE header are equal to 0.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Update release notes for recently supported features in IPsec library and
IPsec Security Gateway application.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
LRO packet may consume all the stride memory, hence the PMD cannot
guaranty head-room for the LRO mbuf.
The issue is lack in HW support to write the packet in offset from the
stride start.
A new striding RQ feature may be added in CX6 DX to allow head-room and
tail-room for the LRO strides.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Use DevX API to read device LRO capabilities.
Check if LRO is supported and can be enabled.
Check if MPRQ is supported and can be used.
Enable MPRQ for LRO use if not enabled by user.
Added note for mlx5_mprq_enabled(), to emphasize that LRO
enables MPRQ.
Disable CQE compression and CRC stripping if LRO is enabled.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add command-line argument to set LRO session timeout.
Add LRO settings struct in PMD configuration struct.
Add support of LRO offload in port configuration.
Add macros and function to check if LRO is supported and enabled.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch introduces new mlx5 PMD devarg options:
- txq_inline_min - specifies minimal amount of data to be inlined into
WQE during Tx operations. NICs may require this minimal data amount
to operate correctly. The exact value may depend on NIC operation
mode, requested offloads, etc.
- txq_inline_max - specifies the maximal packet length to be completely
inlined into WQE Ethernet Segment for ordinary SEND method. If packet
is larger the specified value, the packet data won't be copied by the
driver at all, data buffer is addressed with a pointer. If packet
length is less or equal all packet data will be copied into WQE.
- txq_inline_mpw - specifies the maximal packet length to be completely
inlined into WQE for Enhanced MPW method.
Driver documentation is also updated.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch removes the existing Tx datapath code
as preparation step before introducing the new
implementation. The following entities are being
removed:
- deprecated devargs support
- tx_burst() routines
- related PRM definitions
- SQ configuration code
- Tx routine selection code
- incompatible Tx completion code
The following devargs are deprecated and ignored:
- "txq_inline" is going to be converted to "txq_inline_max"
for compatibility issue
- "tx_vec_en"
- "txqs_max_vec"
- "txq_mpw_hdr_dseg_en"
- "txq_max_inline_len" is going to be converted
to "txq_inline_mpw" for compatibility issue
The deprecated devarg keys are recognized by PMD
and ignored/converted to the new ones in order not
to block device probing.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Adding support for ipv6_ext header parsing in the octeontx2 flow.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Some configuration options can not be tested properly with testpmd
because it automatically starts all ports. This makes it harder
to test driver handling of configuration options:
(for example rx_deferred_start).
Add new command line flag --disable-device-start which skips
the device start. The port can then be started manually later.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
With the latest published interface of
rte_eal_hotplug_[add,remove](), and rte_eth_dev_close(),
rte_eth_dev_close() would cleanup all the data structures of
port's eth dev leaving the device common resource intact
if RTE_ETH_DEV_CLOSE_REMOVE is set in dev flags.
So a new command "detach device" (~hotplug remove) to work,
with device identifier like "port attach" is added
to be able to detach closed devices.
Also to display currently probed devices, another command
"show device info <identifier>|all" is also added as a
part of this change.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch intend to support
action_raw_encap/decap [1] in a generic and convenient way.
Two new commands - set raw_encap, set raw_decap are introduced just
like the other commands for encap/decap, i.e. set vxlan.
These two commands have corresponding global buffers
which can be used by PMD as the input buffer for raw encap/decap.
The commands use the rte_flow pattern syntax to help user build the
raw buffer in a convenient way.
A common way to use it:
- encap matched egress packet with VxLAN tunnel:
testpmd> set raw_encap eth src is 10:11:22:33:44:55 / vlan tci is 1
inner_type is 0x0800 / ipv4 / udp dst is 4789 / vxlan vni
is 2 / end_set
testpmd> flow create 0 egress pattern eth / ipv4 / end actions
raw_encap / end
- decap l2 header and encap GRE tunnel on matched egress packet:
testpmd> set raw_decap eth / end_set
testpmd> set raw_encap eth dst is 10:22:33:44:55:66 / ipv4 / gre
protocol is 0x0800 / end_set
testpmd> flow create 0 egress pattern eth / ipv4 / end actions
raw_decap / raw_encap / end
- decap VxLAN tunnel and encap l2 header on matched ingress packet:
testpmd> set raw_encap eth src is 10:11:22:33:44:55 type is 0x0800 /
end_set
testpmd> set raw_decap eth / ipv4 / udp / vxlan / end_set
testpmd> flow create 0 ingress pattern eth / ipv4 / udp dst is 250 /
vxlan vni is 0x1234 / ipv4 / end actions raw_decap /
raw_encap / queue index 1 / mark id 0x1234 / end
[1] http://mails.dpdk.org/archives/dev/2018-October/116092.html
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Previously in the PCAP PMD queues has to be defined as RxQ and TxQ
pairs, even if the need is only Rx or only Tx:
"--vdev net_pcap0,tx_pcap=tx.pcap,rx_pcap=rx.pcap"
Following commit enabled only providing Rx queue, and if Tx queue is
not provided PMD drops the Tx packets automatically:
Commit a3f5252e5c ("net/pcap: enable infinitely Rx a pcap file")
"--vdev net_pcap0,rx_pcap=rx.pcap"
This commit enables same thing for Rx queue, user no more have to
provide a Rx queue (rx_iface or rx_pcap), for this case a dummy Rx
burst function is used which doesn't return any packet at all:
"--vdev net_pcap0,tx_pcap=tx.pcap"
This makes only saving packets to a pcap file use case easy.
When both Rx and Tx queues are missing PMD will return an error.
(Single interface is still supported: "--vdev net_pcap0,iface=eth0")
Signed-off-by: Aideen McLoughlin <aideen.mcloughlin@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
All the DV counters are cashed in the PMD memory and are contained in
pools which are contained in containers according to the counters
allocation type - batch or single.
Currently, the flow counter query is done synchronously in pool
resolution means that on the user request a FW command is triggered to
read all the counters in the pool.
A new feature of devX to asynchronously read batch of flow counters
allows to accelerate the user query operation.
Using the DPDK host thread, the PMD periodically triggers asynchronous
query in pool resolution for all the counter pools and an interrupt is
triggered by the FW when the values are updated.
In the interrupt handler the pool counter values raw data is replaced
using a double buffer algorithm (very fast).
In the user query, the PMD just returns the last query values from the
PMD cache - no system-calls and FW commands are triggered from the user
control thread on query operation!
More synchronization is added with the host thread:
Container resize uses double buffer algorithm.
Pools growing in container uses atomic operation.
Pool query buffer replace uses a spinlock.
Pool minimum devX counter ID uses atomic operation.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Enabled IP-in-IP tunnel type support on DV/DR flow engine.
This includes the following combination:
- IPv4 over IPv4
- IPv4 over IPv6
- IPv6 over IPv4
- IPv6 over IPv6
MLX5 NIC supports IP-in-IP tunnel via FLEX Parser so
need to make sure fw using FLEX Paser profile 0.
mlxconfig -d <mst device> -y set FLEX_PARSER_PROFILE_ENABLE=0
The example testpmd commands would be:
- Match on IPv4 over IPv4 packets and do inner RSS:
testpmd> flow create 0 ingress pattern eth / ipv4 proto is 0x04 /
ipv4 / udp / end actions rss level 2 queues 0 1 2 3 end / end
- Match on IPv6 over IPv4 packets and do inner RSS:
testpmd> flow create 0 ingress pattern eth / ipv4 proto is 0x29 /
ipv6 / udp / end actions rss level 2 queues 0 1 2 3 end / end
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
queue= parameter does not exist.
It might have been the previous name of the queue_count parameter, but
anyway, the default value 1 for the number of queues works fine.
Fixes: f1debd77ef ("net/af_xdp: introduce AF_XDP PMD")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Support matching on the present bits (C,K,S)
as well as the optional key field.
If the rte_flow_item_gre_key is specified in pattern,
it will set K present match automatically.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
