The secondary processes are not allowed to release shared resources.
Only process-private resources should be freed in a secondary process.
Most of the time, there is no process-private resource,
so the close operation is just forbidden in a secondary process.
After adding proper check in the port close functions,
some redundant checks in the device remove functions are dropped.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
When start a VF with no initial MAC address assigned by the underlying
Host PF driver, just reuse the MAC address assigned when VF is
initializing.
Fixes: f69166c9a3 ("net/ixgbe: fix reset error handling")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Replace use of RTE_MACHINE_CPUFLAG macros with regular compiler
macros, which are more complete than those provided by DPDK, and as such
it allows new instruction sets to be leveraged without having to do
extra work to set them up in DPDK.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Since existing PMD's support shaper byte mode and scheduler
wfq byte mode, update the same in their port/level/node capabilities
that are added. SoftNIC PMD is already upto date with new capabilities.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.
For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
This patch is a preparation to hide the 'struct eth_dev_ops' from
applications by moving some device operations from 'struct eth_dev_ops'
to 'struct rte_eth_dev'.
Mentioned ethdev APIs are in the data path and implemented as inline
because of performance reasons.
Exposing 'struct eth_dev_ops' to applications is bad because it is a
contract between ethdev and PMDs, not really needs to be known by
applications, also changes in the struct causing ABI breakages which
shouldn't.
To be able to both keep APIs inline and hide the 'struct eth_dev_ops',
moving device operations used in ethdev inline APIs to 'struct
rte_eth_dev' to the same level with Rx/Tx burst functions.
The list of dev_ops moved:
eth_rx_queue_count_t rx_queue_count;
eth_rx_descriptor_done_t rx_descriptor_done;
eth_rx_descriptor_status_t rx_descriptor_status;
eth_tx_descriptor_status_t tx_descriptor_status;
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
rte_ethdev has declared new NUM_UNKNOWN speed which
could be used in case when no speed information is available
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
mac_ctrl_frame_fwd assignment is missing, so
setting mac_ctrl_frame_fwd should be added in
ixgbe_flow_ctrl_get().
The patch fixes the issue.
Fixes: 56ea46a997 ("ethdev: retrieve flow control configuration")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Bo Chen <box.c.chen@intel.com>
mac_ctrl_frame_fwd shouldn't be cleared when port stop,
otherwise it will be inconsistent with the actual status.
This patch fixes the issue.
Fixes: a524f550da ("net/ixgbe: fix flow control mode setting")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Using '__rte_internal' tag in 'rte_ethdev_driver.h' causing build error
for applications and examples. Because they don't define
'ALLOW_INTERNAL_API' flag and '__rte_internal' causes the error.
This patch is preparation for future '__rte_internal' usage.
At first place, applications/examples should not include
'rte_ethdev_driver.h', this is happening because of PMD public header
files include 'rte_ethdev_driver.h' by mistake.
Updated PMD public header files to not include internal header files.
But for unit test application, 'app/test', enable accessing internal
APIs, since some unit tests need them.
Fixes: ffc905f3b8 ("ethdev: separate driver APIs")
Fixes: ec0dec44ec ("net/atlantic: enable MACsec configuration")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Writing to read-only fields returns a non-OK Return Status
for shadow RAM write command for X550.
This information was previously discarded.
Signed-off-by: Stanislaw Grzeszczak <stanislaw.a.grzeszczak@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The codes has been exposed correctly, so remove pre-processor tags.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
We are seeing interoperability issues with switches when 2.5G and 5G
in x550 are advertised by default, so default to off.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Write FDIRIP6M register to allow flow director filter
to set ipv6 rules without setting ipv6 source/destination address.
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
On ESXi OS, when user disables auto negotiation, the following log
appears: "(unsupported) Flow control autoneg is disabled".
It is true that auto negotiation is disabled but it is
not necessarily true that it is not supported.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
While sending request using ixgbe_hic_unlocked() the data field in
buffer struct is not used. It is set when the struct is overwritten by
FW to deliver the response. To not pass random data to FW the whole
structure should be zeroed before use.
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The function ixgbe_device_supports_autoneg_fc is checking whether
a particular device and medium configuration is supporting
Flow Control Autonegotiation. In case of non-support, the message
is always logged which is confusing.
The fix is removing unnecessary log entry.
Signed-off-by: Zalfresso-Jundzillo <marekx.zalfresso-jundzillo@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Add typecast for type mismatch.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
This patch is for restarting auto negotiation on PHY.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The retry variable was being incremented before it was evaluated by the
subsequent conditional against the maximum retries to figure out which
message to print. So we'll move the increment op to the end.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Remove unnecessary extra whitespace on all function comments, replacing
' * ' with ' * '.
This was done automatically via sed using the following transformation:
sed 's/^ \* / * /'
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Several functions in the driver code have a weird function comment
formatting which uses two spaces instead of only one space for the main
function body.
This formatting will be mechanically fixed by sed in a future patch, but
doing so leads to some spelling warnings on that patch. Cleanup the
spelling mistakes that will be detected first. This way, it is easier to
verify the mechanical transformation done by sed in the following patch.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
In some corner cases the functions ixgbe_clear_rar_generic and
ixgbe_clear_vmdq_generic may call one another leading to infinite
recursion.
When ixgbe_clear_vmdq_generic is called with IXGBE_CLEAR_VMDQ_ALL
flag, it's going to clear MPSAR registers, and proceed to call
ixgbe_clear_rar_generic, which in turn will clear the RAR registers,
and recursively call back ixgbe_clear_vmdq_generic. Normally, the
latter would detect that MPSAR registers have already been cleared
and terminate the recursion.
However, when PCIe link is down, and before the driver has had the
opportunity to shut itself down, all register reads return 0xFFFFFFFF,
and all register writes fail silently. In such case, because
ixgbe_clear_vmdq_generic blindly assumes that clearing MPSAR registers
succeeded, it's going to always call ixgbe_clear_rar_generic, which
in turn will always call back ixgbe_clear_vmdq_generic, creating
infinite recursion.
This patch re-reads MPSAR register values after they had been cleared.
In case of PCIe link failure, the values read will be non-zero, which
will terminate the recursion. On the other hand, under normal
circumstances the value read from MPSAR registers is going to be equal
to the value previously written, so this patch is expected not to cause
any regressions.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
With the NVM image for x550em XFI will not report
the auto-negotiation feature correctly. The auto-negotiation
should be "No" for supports and advertised items.
At the same time update speed makes it support 1G and 10G.
Fixes: 833df43399 ("net/ixgbe/base: add SGMII link for X550")
Cc: stable@dpdk.org
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
For the "Apply Update" command the firmware does not
given an response. For this command, success should
be return.
Signed-off-by: Mateusz Kowalski <mateusz.kowalski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Host interface Shadow RAM Read (0x31) command response
buffer length should be stored in two bytes, instead of one byte.
This patch fixes it.
Fixes: e6102361b1 ("net/ixgbe/base: use 2 bytes for flash read command")
Cc: stable@dpdk.org
Signed-off-by: Mateusz Kowalski <mateusz.kowalski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The legacy filter API will be superseded by rte_flow.
There are also several small features which can not be
implemented in rte_flow. This patch re-implemented these
features as private API.
Two APIs are added:
rte_pmd_ixgbe_get_fdir_info.
rte_pmd_ixgbe_get_fdir_stats.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
The question around getting rid of the assignments seems lived
long enough, if they are not needed until now, we can drop them.
Fixes: 39bca0ed99 ("ixgbe: DCB in base driver")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For ixgbe x553(IXGBE_DEV_ID_X550EM_A_1G_T) it support 10M
link speed, so add the support link speed info for 10Mb/s.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The include of 'arm_neon.h' causes issues to old gcc and aarch32.
Including 'rte_vect.h' instead fixes these issues.
Fixes: b20971b6cc ("net/ixgbe: implement vector driver for ARM")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Expand vector PMD support to aarch32.
Enable ixgbe PMD by default for armv7 make build.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The driver type need to be checked in private API.
Fixes: 50556c8810 ("net/ixgbe: fix MACsec setting")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Clarify Intel copyright and update the date to 2020.
Fixes: 9db3087f4f ("net/ixgbe/base: update the license")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The register autoneg can't be updated synchronously with flow control
mode setting in the state of port start, so NIC statistics error occurs.
AUTO_NEG Advt register should be updated by ixgbe_setup_fc() when
enabling flow control.
The patch fixes the issue.
Fixes: a524f550da ("net/ixgbe: fix flow control mode setting")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
In ixgbe_dev_link_update_share(), if the media type is fiber and the
link is down, a flag (IXGBE_FLAG_NEED_LINK_CONFIG) is set. A callback
to ixgbe_dev_setup_link_thread_handler() is scheduled which should
try to set up the link and clear the flag afterwards. This flag works
as a guard variable between threads.
To avoid potential race condition between threads, set the
IXGBE_FLAG_NEED_LINK_CONFIG flag only when there is no link thread
running.
Bugzilla ID: 388
Fixes: 819d0d1d57 ("net/ixgbe: fix blocking system events")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Lijian Zhang <lijian.zhang@arm.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
DPDK does not implement interrupt mechanism on BSD,
so force NIC status synchronization.
Fixes: dc66e5fd01 ("net/ixgbe: improve link state check on VF")
Cc: stable@dpdk.org
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Tested-by: Zhimin Huang <zhiminx.huang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
It's a normal behavior to change the link status to up after
resetting the port. So it is unnecessary to set link down before
starting port, and changing the link state(link up/down) frequently
will cause link speed unstable.
Fixes: c3f2fbff78 ("net/ixgbe: fix link status")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Tested-by: Xueming Zhang <xuemingx.zhang@intel.com>
When the thread exits normally, pthread_join() is not called, which can
result in a resource leak. Therefore, the thread is set to separation
mode using function pthread_detach(), so that no program call
pthread_join() is required to recycle, and when the thread exits,
the system automatically reclaims resources.
Wait for the thread to finish with timeout argument(0 means that it will
not return until link complete), wait until the thread finishes before
returning. Normally, the thread will finish in a shorter time, and give
a warning message if it hasn't finished in a longer time.
Fixes: 819d0d1d57 ("net/ixgbe: fix blocking system events")
Cc: stable@dpdk.org
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
e_tag_ether_type has been wrongly defined as bool type which introduces
a bug for etag/etag_strip for x550 NIC. Fixes it by defining it as
uint16_t.
Fixes: ad43b7bce9 ("net/ixgbe: avoid multiple definitions of bool")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Setting LINK UP or LINK DOWN is divided into two parts, with
the main task done in a separate thread, which can take up
to 9 seconds. If cancel the thread in execution, may cause state
inconsistencies. Therefore, must wait for the previous setting
to exit normally before setting the new state.
Note: before using threads, use alarm to handle main tasks.
When canceling alarm, the execution of alarm will not be interrupted.
Fixes: 819d0d1d57 ("net/ixgbe: fix blocking system events")
Cc: stable@dpdk.org
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Tested-by: Yu Jiang <yux.jiang@intel.com>
