Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
After commit "d68249f88266", driver allocates ring groups in
bnxt_alloc_hwrm_rx_ring(). But during port start, driver invokes
bnxt_alloc_hwrm_rx_ring() followed by bnxt_alloc_all_hwrm_ring_grps().
This will cause the FW command failure in bnxt_alloc_all_hwrm_ring_grps()
To fix this, just don't create the ring group if it is already created.
Fixes: 9b63c6fd70e3 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Added an invalid fw_grp_id check inside bnxt_hwrm_ring_grp_free().
This will prevent invalid fw_grp_id to be passed to the FW which can
result in an error.
This fixes the following failure in the "port stop" -> "port start"
sequence:
bnxt_hwrm_ring_grp_free(): error 2:0:00000000:0204
bnxt_hwrm_ring_grp_free(): error 2:0:00000000:0204
Fixes: 9b63c6fd70e3 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
VLAN offload capability may be disabled in the FW. The driver
should not attempt to override or utilize this feature in such
scenarios since it will not work as expected.
Fixes: 0a6d2a720078 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In the scalar Rx path, for the VLAN packet, TCI is not saved in
the "mbuf->vlan_tci", however the STRIPPED offload flag is set
along with PKT_RX_VLAN flag.
Fixes: c1b33d40315f ("net/bnxt: use table based mbuf flags handling")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
During port stop/start sequence the Thor FW is returning an error.
This is because we are deriving incorrect active Rx ring and using
that wrong information in the bnxt_vnic_rss_cfg HWRM command.
Fix it by using the rx_queue_state from eth_dev.
Fixes: 0105ea1296c9 ("net/bnxt: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
On chips like Thor, port stop/start sequence could result in a crash
in the application. This is because of false detection of a bad
opaque in the Rx completion and the subsequent kicking-in of the ring
reset code to recover from the condition.
The root cause being that the port stop/start would result in the HW
starting with fresh values, while the driver internal tracker variable
`rx_next_cons` is still pointing to a stale value.
Fix this by resetting rx_next_cons to 0 in bnxt_init_one_rx_ring()
Fixes: 03c8f2fe111c ("net/bnxt: detect bad opaque in Rx completion")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
A Rx ring stop start sequence may result in the FW returning
a different set of Rx ring and AGG ring IDs. If the ring group
is not updated with the new IDs, the HW sees the host driver using
incorrect BD types for the Rx ring and AGG ring. This can cause
the chip to go into a bad state or encounter RE_flush issue
or leak mbufs in the HW.
Fix this by issuing a bnxt_hwrm_ring_grp_free() and an
bnxt_hwrm_ring_grp_alloc() to refresh the ring group information.
Fixes: 9b63c6fd70e3 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
For Thor, the number of action records is being wrongly configured
to 128 because of incorrect definition of divider. This results in
an incorrect number of action records being negotiated with the FW.
Remove the divider from the templates and delete the logic which
uses the field in the resource manager logic.
Fixes: 3fe124d2536c ("net/bnxt: support Thor platform")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Tested-by: Shuanglin Wang <shuanglin.wang@broadcom.com>
In a few cases with Thor device, PMD can segfault when VF
representors are specified. Temporarily fix it by preventing
VF reps for Thor device. This will be addressed in next release.
Fixes: 3fe124d2536c ("net/bnxt: support Thor platform")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The flow counters is reduced from 8192 to 6912 for Whitney
for compatibility with different versions of FW.
The FW resource manager splits resources for flow offload
and other use cases. A higher value used for flow offload
by the PMD can cause overriding the resources set aside by
FW. This in turn can lead to FW rejecting filter creation
requests during initialization.
Use a smaller safe value to avoid these issues.
Fixes: 6fad9115101c ("net/bnxt: reorganize ULP template directory structure")
Cc: stable@dpdk.org
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix the resource qcap list handling to use size based on
FW response.
The size of resource qcap list could be different when FW
and application are not matching. Application should be able
to handle this scenario when the FW is older and the size of
qcap is smaller. Failure to do this causes initialization failure.
This patch is needed for backward compatibility on different
firmware versions.
Fixes: 873661aa641a1 ("net/bnxt: support shared session")
Cc: stable@dpdk.org
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
On older Wh+ firmware versions, HWRM_FUNC_QCFG returns zero
for the parent default vnic. Commit "3fb93bc7c349" added a
temporary Wh+-specific workaround in the PMD.
This has been fixed in latest firmware and hence removing
the workaround.
Fixes: 3fb93bc7c349 ("net/bnxt: initialize parent PF information")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Update cfa_resource_types.h to add a new entry for compatibility with FW.
Signed-off-by: Shuanglin Wang <shuanglin.wang@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
As part of the workaround put in the commit "219842b9990c",
driver caches the last read stats values from the hardware.
But this is not cleared during the clear stats operation. This
results in showing up stale stats values while reading the stats
after the clear operation.
Fixes: 219842b9990c ("net/bnxt: workaround spurious zero stats in Thor")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
FW has been modified to send a new async event when it detects
a pause storm. Register for this new event and log it upon receipt.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Store the async event completion data1 and data2 in separate variables
at the start of the function before the switch case for the different
events so they can be used by any of the event handlers.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This enables device firmware to respond appropriately to BMC queries
about the driver's configured MTU.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
- HWRM version updated to 1.10.2.44
- Added corresponding driver changes for the Admin MTU field name change.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Bnxt PMD registers LSC callback (bond_ethdev_lsc_event_callback) when
working at bond mode. This callback will dead lock when LSC
interrupt triggered.
lsc interrupt ->
bnxt_handle_async_event ->
bnxt_link_update_op ->
bond_ethdev_lsc_event_callback (lsc_lock) ->
bnxt_link_update_op ->
bond_ethdev_lsc_event_callback (lsc_lock dead lock)
Fixes: c2faa1d1969e ("net/bnxt: add support for LSC interrupt event")
Cc: stable@dpdk.org
Signed-off-by: Weifeng Li <liweifeng96@126.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Ensure that Rx/Tx/Async completion entry fields are accessed
only after the completion's valid flag has been loaded and
verified. This is needed for correct operation on systems that
use relaxed memory consistency models.
Fixes: 2eb53b134aae ("net/bnxt: add initial Rx code")
Fixes: 6eb3cc2294fd ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Fix build failures seen on Fedora Core 34 (GCC 11)
because of uninitialized variables.
In function ‘ulp_mapper_index_tbl_process’:
drivers/net/bnxt/tf_ulp/ulp_mapper.c:2252:43: error:
‘*(unsigned int *)((char *)&glb_res + offsetof(struct bnxt_ulp_glb_resource_info, resource_func))’
may be used uninitialized in this function
2252 | struct bnxt_ulp_glb_resource_info glb_res;
| ^~~~~~~
drivers/net/bnxt/tf_ulp/ulp_mapper.c:2252:43: error:
‘glb_res.resource_type’ may be used uninitialized in this function
In function ‘dpool_defrag’:
drivers/net/bnxt/tf_core/dpool.c:95:18: error:
‘index’ may be used uninitialized in this function
95 | uint32_t index;
| ^~~~~
Fixes: 05b405d58148 ("net/bnxt: add dpool allocator for EM allocation")
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
NEON vector path of the PMD needs aarch64 support. But it was
enabled for aarch32 build as well because aarch32 build had
cpu_family set to aarch64. So build for aarch32 will fail due
to unsupported intrinsics.
Fix aarch32 build by updating meson file to exclude NEON vector
implementation for aarch32.
Fixes: 398358341419 ("net/bnxt: support NEON")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Don't set rxq interrupt config
Applications can set the rxq interrupt config to 1 or 0 as needed.
If an application is not interested in handling Rx interrupts and
prefers to poll Rx rings, there is no need for the PMD to set this
config option to 1.
Fixes: 1fe427fd08ee ("net/bnxt: support enable/disable interrupt")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Add support for runtime Rx and Tx queue setup. This will allow
Rx/Tx queue setup after the interface is started.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Code related to maintaining completion ring "valid" state is
no longer needed, remove it.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Preserve the raw (unmasked) transmit completion ring
consumer index.
Remove cache prefetches that have no measurable performance
benefit.
Fixes: c7de4195cc4c ("net/bnxt: modify ring index logic")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
With Tx completion batching, a single transmit completion
can correspond to one or more transmit descriptors, adjust
implementation to account for this.
RTE_ETH_TX_DESC_DONE should be returned for descriptors that
are available for use instead of RTE_ETH_TX_DESC_UNAVAIL.
Fixes: 5735eb241947 ("net/bnxt: support Tx batching")
Fixes: 478ed3bb7b9d ("net/bnxt: support Tx descriptor status")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When the driver receives RESET_NOTIFY async event from FW or detects
a FW fatal error condition, it tries to recover from the error.
When the driver fails to recover from the error condition, fixed to
send device removal event to the application.
Fixes: df6cd7c1f73a ("net/bnxt: handle reset notify async event from FW")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Driver should enable autoneg on a port if FW supports it.
Because of a wrong check, driver is not enabling autoneg
on a port after setting forced speed on Whitney+.
Fixes: 7bc8e9a227cc ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This is a cleanup commit and no functional change.
1. use macros instead of hard coded values
2. remove unnecessary comments
Fixes: 5cd0e2889c43 ("net/bnxt: support NIC Partitioning")
Fixes: 2ba07b7dbd9d ("net/bnxt: set the hash key size")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support to fetch the SFP EEPROM settings from the firmware.
For SFP+ modules we will display 0xA0 page for status and 0xA2 page
for other information. For QSFP modules we will show the 0xA0 page.
Also identify the module types for QSFP28, QSFP, QSFP+ apart
from the SFP modules and return an error for 10GBase-T PHY.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
1. Disable accum_stats for Thor
2. Delete the generic port table for default flow
3. The packet mask to calculate the number of packets must be 28 bits.
4. Increase the WC TCAM entries to 512 per application and add 2
shared L2 context TCAM entries to match identifiers for flow
scaling
5. Ignore multiple critical resources in ULP flow database
6. Renamed conditional code update to function opcode.
7. Updated TRUFLOW debug logs to support the above changes.
8. As part of the HA cleanup, the shared session name now allows the user
to designate that the session uses the wc_tcam regions within the
shared session.
9. The CFA action pointer does not exist if there is no support for
VF representor, so no need to display the message for use case where
there is no support for VF representors.
10. Cleanup flow counter software accumulation.
11. When an application exits ungracefully, the HA code now
clears the appropriate shared WC region and sets the HA state.
12. Removal of unnecessary INFO message. The message is an indicator that
the ports are being removed from DPDK, but all cleanup has not
completed. Once the cleanup is completed, the timer will be stopped.
Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add context in ULP for timers.
The alarm callback needs to have a valid context pointer when it is
invoked. The context could become invalid if the port goes down and
the callback is invoked before it is cancelled.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add the ability for cooperative applications to share resources and
use the high availability functionality in the HW.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Add template support for shared sessions.
2. Store the shared session flag in flow data base.
3. Store WC TCAM region in the computational field.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Shared sessions require both named and unnamed resources to be requested
during a tf_open_session. ULP uses named resources for global resources
that are pre-allocated and remain through the life of the application.
Unnamed resources are generally per flow resources and allocated on
demand. The sum of both named and unnamed resources must be requested
when initializing the session. The ulp_init now processes both lists
prior to calling tf_open_session for both shared and regular sessions.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The application id in the ULP matcher makes the template matching
restrict to only flows that are supported for that application.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add field opcodes that perform logical evaluation of
multiple conditions. Also add more logging especially in
error path.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Shared session permits cooperative sharing of prescribed resources
between applications.
- devargs added for app-id in order to enable sharing session
resources across applications
- shared session management added
- TRUFLOW resource reservations are now app ID and device dependent
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Remove Ether type, VLAN type and IP proto type from pattern matching,
since the header bits can be used for matching. This reduces the class
template signatures by a factor of 8.
2. Remove the wild card bit in the pattern matching since same template
can be used for both exact and wild card entries.
3. The action record pointers have to use higher range to not collide
with the firmware action record pointers. Hence reduced the number of
action record pointers for Whitney platform.
4. The conditional update opcode provide functionality to reject flows
for instance reject flows that do not adhere to flow signature match.
5. Added check to not populate protocol specifications if the
protocol mask is null or zero.
6. Check that field array is not overrun.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
