make showversion will print 18.11.0-rc0 but Meson sets 18.11-rc0,
causing among other things a difference in the generated documentation.
Fixes: 76b9d9de5c ("version: 18.11-rc0")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This will allow the same config file to be used from Meson.
The result has been verified to be identical via diffoscope.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This will make it possible to generate the file in the same way from
Meson as well.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Versions of meson prior to 0.47 flattened the parameters to the
"set_variable" function, which meant that the function could not take
array variables as a parameter. Therefore, we need to disable driver
tracking for those older versions, in order to maintain compatibility
with the minimum supported 0.41 version, and also v0.45 shipped in
Ubuntu 18.04 release.
Fixes: 806c45dd48 ("build: add configuration summary at end of config")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Timothy Redaelli <tredaelli@redhat.com>
For usability, the default build type in meson is static, so that
binaries can be run from the build directory easily. However, static
builds take more space, so for build-testing purposes default to using
shared builds where possible.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
pdump library now uses generic multi process channel
and it is no more dependent on the pthreads, so remove
the dependency from the Makefile.
Fixes: 660098d61f ("pdump: use generic multi-process channel")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
After running meson to configure a DPDK build, it can be useful to know
what was automatically enabled or disabled. Therefore, print out by way of
summary a categorised list of libraries and drivers to be built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
EAL is a standard dependency of all libraries, except for those built
before it. We can therefore simplify the logic by just checking if EAL
has been processed, and make it a standard dependency if so.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This has been only build-tested for now, on a native ppc64el POWER8E
machine running Debian sid.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Install in $kerneldir/../extra/dpdk. Usually $kerneldir should something
like: /lib/modules/$kver/build, so this directory will match the default
one used by legacy makefiles.
Fixes: a52f4574f7 ("igb_uio: build with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This PMD is built with -Wno-format, which means GCC errors out if
-Wformat-security is used.
Fixes: e940646b20 ("drivers/net: build Intel NIC PMDs with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This PMD is built with -Wno-format, which means GCC errors out if
-Wformat-security is used.
Fixes: 56bb54ea1b ("raw/ifpga/base: add Intel FPGA OPAE share code")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
They are built by the legacy makefiles but not by Meson.
Fixes: 8f40ee0734 ("eal/x86: get hypervisor name")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
For meson builds, the define to enable the symbol version
macros in rte_compat.h was missing. This led to symbols being
omitted from shared objects. For example, checking rte_distributor.so
with objdump and comparing make and meson built versions:
$ objdump -T make-build/lib/librte_distributor.so | grep _flush
0000000000001b60 g DF .text 00000000000000a7 (DPDK_2.0) rte_distributor_flush
0000000000003f10 g DF .text 0000000000000434 DPDK_17.05 rte_distributor_flush
$ objdump -T meson-build/lib/librte_distributor.so | grep _flush
0000000000001d50 g DF .text 00000000000000fb DPDK_2.0 rte_distributor_flush
Adding in the missing define fixes this.
Fixes: 5b9656b157 ("lib: build with meson")
Cc: stable@dpdk.org
Reported-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Omitting inputs and outputs mbuf creation for BaseBand Null Device
as inputs and outputs data do not exist for Null Device
Fixes: b2a4654f08 ("mempool: check for zero size creation")
Cc: stable@dpdk.org
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
The QAT compression driver was named "qat".
Rename to compress_qat for consistency with other compressdev drivers
and with crypto_qat.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Added description of the build configuration options for QAT.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Update PMD build section.
Linked to kernel dependency section and refactored text
between those 2 sections.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Add overview of QAT doc sections and link between them.
Indent to next level all sections within
the crypto and common sections.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Add section to common QAT part of doc about
which tests can be used to exercise
QAT compress and crypto PMDS
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Comments says "no csum error report support" but there is no check
related csum offloads. Removing the comment.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Integrate accelerated networking support into netvsc PMD.
This allows netvsc to manage VF without using failsafe or vdev_netvsc.
For the exception vswitch path some tests like transmit
get a 22% increase in packets/sec.
For the VF path, the code is slightly shorter but has no
real change in performance.
Pro:
* using netvsc is more like other DPDK NIC's
* the exception packet uses less CPU
* much smaller code size
* no locking required on VF transmit/receive path
* no legacy Linux network device to get mangled by userspace
* much simpler (1K vs 9K) LOC
* unified extended statistics
Con:
* using netvsc has more complex startup model
* no bifurcated driver support
* no flow support (since host does not have flow API).
* no tunnel offload support
* no receive interrupt support
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Implement callback functionality on link state changes.
This is not really driven off of interrupt file descriptor like most other
PMD's. Instead, it happens when a link state change message arrives
in the common ring buffer.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
If application sends faster than vswitch can keep up, then the
transmit descriptor pool will be exhausted. This is not a failure
so change the name statistic and don't include it in oerrors.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Bonding driver ignores the value of RSS key (that is set in the port RSS
configuration) in bond_ethdev_configure(). So the only way to set
non-default RSS key is by using rss_hash_update(). This is not an
expected behaviour.
Make the bond_ethdev_configure() set default RSS key only if
requested key is set to NULL.
Fixes: 734ce47f71 ("bonding: support RSS dynamic configuration")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Chas Williams <chas3@att.com>
Default Redirection Table that is set in bonding driver is distributed
evenly over all Rx queues only within every RETA group (the first RETA
entries in every group are always start with zero). But in the most
drivers, default RETA is distributed over all Rx queues without sequence
resets in the beginning of a new group, which implies more balanced
per-core load.
Change the default RETA to be evenly distributed over all Rx queues
considering the whole table.
Fixes: 734ce47f71 ("bonding: support RSS dynamic configuration")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Chas Williams <chas3@att.com>
Add flow operations to match packets based on destination MAC address.
Allocate and program hardware MPS table with the destination MAC
address to be matched against. The returned MPS index is then used while
offloading flows to LETCAM (maskfull) and HASH (maskless) filter regions.
Also update existing mac_addr_set() to use the new MPS table API.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to program and manage hardware Multi Port Switch table. MPS
holds destination MAC addresses to be matched against incoming packets
for further rule processing. Packets not matching any entry in MPS table
will be dropped by default, unless the underlying port is in promiscuous
mode.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add flow API operations to offload vlan push, pop, and rewrite actions.
For vlan push or rewrite actions, allocate and program an entry from
L2T table. Use the L2T index to program vlan actions for LETCAM
(maskfull) and HASH (maskless) filters.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to program and manage hardware Layer 2 Table. L2T holds
information necessary to rewrite specific fields in packet, such
as destination MAC address and vlan id.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Originally vhost_crypto sample application only supports single
core. This patch adds the multi-core support with more flexible
options.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Patch 5355f443 added two definitions of DEV_TX_OFFLOAD_xxx.
If new Tx offload capabilities are defined, they also must be mentioned
in rte_tx_offload_names in rte_ethdev.c file.
This patch adds the required lines in array rte_tx_offload_names.
Fixes: 5355f4439e ("ethdev: introduce generic IP/UDP tunnel checksum and TSO")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
>From the Intel Ethernet Controller X710/XXV710/XL710 Specification
Update:
Starting from NVM 5.02, if the Set Local LLDP MIB command is
received while the DCBx specific agent is stopped, the command
returns an EPERM error. If the command is received while the
LLDP agent is stopped, it sets the local MIB without exchanging
LLDP with peer, and returns SUCCESS.
This results in the harmless, but annoying, diagnostic:
default dcb config fails. err = -53, aq_err = 1.
So, if possible (older firmwares cannot safely stop LLDP), stop the
LLDP daemon when we are in software mod before we attempt to call
i40e_set_dcb_config.
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds alarm handler, and then i40e
PF will use alarm handler instead of interrupt
handler when device is started and Rx interrupt
mode is disabled. This way will save CPU cycles
during receiving packets.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
