Since commit 59fe5e17d9 ("vhost: propagate set features handling error"),
vhost does not allow to set different features without reset.
The virtio-user driver fails to reset the device in below commit.
To fix, we send the reset message as stopping the device.
Fixes: c12a26ee20 ("net/virtio-user: fix not properly reset device")
Cc: stable@dpdk.org
Reported-by: Lei Yao <lei.a.yao@intel.com>
Reported-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When live migration is done, for the backup VM, either the virtio
frontend or the vhost backend needs to send out gratuitous RARP packet
to announce its new network location.
This patch enables VIRTIO_NET_F_GUEST_ANNOUNCE feature to support live
migration scenario where the vhost backend doesn't have the ability to
generate RARP packet.
Brief introduction of the work flow:
1. QEMU finishes live migration, pokes the backup VM with an interrupt.
2. Virtio interrupt handler reads out the interrupt status value, and
realizes it needs to send out RARP packet to announce its location.
3. Pause device to stop worker thread touching the queues.
4. Inject a RARP packet into a Tx Queue.
5. Ack the interrupt via control queue.
6. Resume device to continue packet processing.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This patch adds dev_pause, dev_resume and inject_pkts APIs to allow
driver to pause the worker threads and inject special packets into
Tx queue. The next patch will be based on this.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The virtio_send_command function may be called from app's configuration
routine, but also from an interrupt handler called when live migration
is done on the backup side. So this patch makes control queue
thread-safe first.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The max_mtu is kept as zero in case no CRTL channel, which leads
to failure when calling virtio_mtu_set().
Signed-off-by: Zhike Wang <wangzhike@jd.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The pointer to the user parameter of the callback registration is
automatically pass to the callback function.
There is no point to allow changing this user parameter by a caller.
That's why this parameter is always set to NULL by PMDs and set only
in ethdev layer before calling the callback function.
The history is that the user parameter was initially used
by the callback implementation to pass some information
between the application and the driver:
c1ceaf3ad0 ("ethdev: add an argument to internal callback function")
Then a new parameter has been added to leave the user parameter
to its standard usage of context given at registration:
d6af1a13d7 ("ethdev: add return values to callback process API")
The NULL parameter in the internal callback processing function
is now removed. It makes clear that the callback parameter is user
managed and opaque from a DPDK point of view.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
RTE_VIRTIO_VPMD_RX_BURST and RTE_VIRTIO_VPMD_RX_REARM_THRESH
have been defined and used in virtio_rxtx_simple.h, but are
defined again in virtio_rxtx_simple_*.c. It just happens to
work. So remove the redundant definitions from the *.c files.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
VIRTIO_NET_CTRL_MAC_ADDR_SET is defined two times in
virtqueue.h, the second one is obviously not wanted.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The vector Rx will be broken if backend has consumed all
the descs in the avail ring before the device is started.
Because in current implementation, vector Rx will return
immediately without refilling the avail ring if the used
ring is empty. So we have to refill the avail ring after
flushing the elements in the used ring for vector Rx.
Besides, vector Rx has a different ring layout assumption
and mbuf management. So we need to handle it differently.
Fixes: d8227497ec ("net/virtio: flush Rx queues on start")
Cc: stable@dpdk.org
Reported-by: Antonio Fischetti <antonio.fischetti@intel.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Antonio Fischetti <antonio.fischetti@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The rx_queues and tx_queues fields of the data structure points to a
struct virtnet_rx or virtnet_tx. Casting it to a virtqueue is an error.
It does not trigger any bug because pointer is not dereferenced inside
the function, but it can become a bug if this code is copy/pasted and
vq is dereferenced.
Fixes: 01ad44fd37 ("net/virtio: split Rx/Tx queue")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
DPDK has already the definition of Ethernet numeric link speeds in Mbps
in the file Rte_ethdev.h, it is unnecessary to rededine virtio specific
link speeds macros again.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
In function eth_virtio_dev_init(), dynamic memory stored
in "eth_dev->data->mac_addrs" variable and it is not freed
when function return,
this is a possible memory leak.
Fixes: 8ced1542f7 ("net/virtio: eth_dev->data->mac_addrs is not freed")
Cc: stable@dpdk.org
Signed-off-by: Pengzhen Liu <liupengzhen3@huawei.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
When running l3fwd-power to test virtio rxq interrupt using vfio
pci noiommu mode, startup fails. In the function virtio_read_caps,
the code if (flags & PCI_MSIX_ENABLE) intends to double check
if vfio msix is enabled or not. However, it is not enable at that
time. So use_msix is assigned to "0", not "1", which causes the
failure of configuring rxq intr in l3fwd-power.
This patch adds the function "vtpci_msix_detect" to detect the status
of msix when interrupt changes happen.
In the meanwhile, virtio_intr_enable/disable are introduced to wrap
rte_intr_enable/disable to enhance the ability to detect msix.
use_msix can indicate three different msix status by:
VIRTIO_MSIX_NONE (0)
VIRTIO_MSIX_DISABLED (1)
VIRTIO_MSIX_ENABLED (2)
Fixes: cb482cb3a3 ("net/virtio: fix MAC address read")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
For virtual device, the rte_intr_handle struct is
initialized by the virtual device driver, including
the event fd assignment. If the event fd need to be
read for clean, an argument is required for the proper
event fd read.
This patch adds efd_counter_size in rte_intr_handle
struct to tell the rx interrupt process the read size.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Some devices may not support or fail setting VLAN offload
configuration based on dynamic circumstances so the
vlan_offload_set_t vector is modified to return an int so
the caller can determine success or not.
rte_eth_dev_set_vlan_offload is updated to return the
value provided by the vector when called along with restoring
the original offload configs on failure.
Existing vlan_offload_set_t vectors are modified to return
an int. Majority of cases return 0 but a few that actually
can fail now return their failure codes.
Finally, a vlan_offload_set_t vector is added to virtio
to facilitate dynamically turning VLAN strip on or off.
Signed-off-by: David Harton <dharton@cisco.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In the function virtqueue_enqueue_xmit(), when can_push is true,
vtnet_hdr_size is added to pkt_len by calling rte_pktmbuf_prepend.
which is wrong for pkt stats, virtio header length should be subtracted
before calling stats function.
Fixes: 58169a9c81 ("net/virtio: support Tx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Report an error message if the flag O_NONBLOCK setting fails,
then return from function.
Coverity issue: 143439
Fixes: ef53b60300 ("net/virtio-user: support LSC")
Cc: stable@dpdk.org
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
After starting a device, the driver shouldn't deliver the
packets that already existed before the device is started
to applications. Otherwise it will lead to incorrect packet
collection for port state. This patch fixes this issue by
flushing the Rx queues when starting the device.
Fixes: a85786dc81 ("virtio: fix states handling during initialization")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The compilation with gcc-6.3.0 and EXTRA_CFLAGS=-Og gives the following
error:
CC virtio_rxtx.o
virtio_rxtx.c: In function ‘virtio_rx_offload’:
virtio_rxtx.c:680:10: error: ‘csum’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
csum = ~csum;
~~~~~^~~~~~~
The function rte_raw_cksum_mbuf() may indeed return an error, and
in this case, csum won't be initialized. Fix it by initializing csum
to 0.
Fixes: 96cb671193 ("net/virtio: support Rx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fix calling strncpy with the a maximum size equal of destination
array size.
Coverity issue: 140732
Fixes: e3b434818b ("net/virtio-user: support kernel vhost")
Cc: stable@dpdk.org
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
To use pointer instead of memcpy can save many cycles in the funciton
virtio_send_command.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Fixed a comment in struct virtionet_ctl, referring to the ring type
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The unscrutinized value may be incorrectly assumed to be within a certain
range by later operations.
In vhost_user_read: An unscrutinized value from an untrusted source used
in a trusted context - the value of sz_payload may be harmfull and we need
limit them to the max value of payload.
Coverity issue: 139601
Fixes: 6a84c37e39 ("net/virtio-user: add vhost-user adapter layer")
Cc: stable@dpdk.org
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The simple Rx handler is selected even if Rx checksum offload is
requested by the application, but this handler does not support
offloads. This results in broken received packets (no checksum flag but
invalid checksum in the mbuf data).
Disable the simple Rx handler in that case.
Fixes: 96cb671193 ("net/virtio: support Rx checksum offload")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Split use_simple_rxtx into use_simple_rx and use_simple_tx,
and ensure that only use_simple_tx is updated when txq flags
forces to use the standard Tx handler.
This change is also useful for next commit (disable simple Rx
path when Rx checksum is requested).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Since commit f27769f796 ("mk: require SSE4.2 support on all x86
platforms"), SSE4.2 is a requirement when compiling on x86 platforms.
We can remove this check in the virtio driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The selection of Rx/Tx handlers is done at several places,
group them in one function set_rxtx_funcs().
The update of hw->use_simple_rxtx is also rationalized:
- initialized to 1 (prefer simple path)
- in dev configure or rx/tx queue setup, if something prevents from
using the simple path, change it to 0.
- in dev start, set the handlers according to hw->use_simple_rxtx.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
In rx/tx queue setup functions, some code is executed only if
use_simple_rxtx == 1. The value of this variable can change depending on
the offload flags or sse support. If Rx queue setup is called before Tx
queue setup, it can result in an invalid configuration:
- dev_configure is called: use_simple_rxtx is initialized to 0
- rx queue setup is called: queues are initialized without simple path
support
- tx queue setup is called: use_simple_rxtx switch to 1, and simple
Rx/Tx handlers are selected
Fix this by postponing a part of Rx/Tx queue initialization in
dev_start(), as it was the case in the initial implementation.
Fixes: 48cec290a3 ("net/virtio: move queue configure code to proper place")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The mbuf->port was was not properly set for the first received
mbufs. Fix this by setting it in virtqueue_enqueue_recv_refill_simple(),
which is used to enqueue the first mbuf in the ring.
The function virtio_rxq_rearm_vec(), which is used to rearm the ring
with new mbufs, is correct and does not need to be updated.
Fixes: cab0461234 ("virtio: fill Rx avail ring with blank mbufs")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
On error, we should log with error level.
Fixes: 9f4f2846ef ("virtio: support vlan filtering")
Fixes: 86d59b2146 ("net/virtio: support LRO")
Fixes: 96cb671193 ("net/virtio: support Rx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This reverts
commit 4dab342b75 ("net/virtio: do not falsely claim to do IP checksum").
The description of rxmode->hw_ip_checksum is:
hw_ip_checksum : 1, /**< IP/UDP/TCP checksum offload enable. */
Despite its name, this field can be set by an application to enable L3
and L4 checksums. In case of virtio, only L4 checksum is supported and
L3 checksums flags will always be set to "unknown".
Fixes: 4dab342b75 ("net/virtio: do not falsely claim to do IP checksum")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This reverts
commit 701a64622c ("net/virtio: do not claim to support LRO")
Setting rxmode->enable_lro is a way to tell the host that the guest is
ok to receive tso packets. From the guest point of view, it is like
enabling LRO on a physical driver.
Fixes: 701a64622c ("net/virtio: do not claim to support LRO")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Acccording to the vhost-user spec [0], client must start ring
upon receiving a kick (that is, detecting that file descriptor
is reachable) on the descriptor specified by VHOST_USER_SET_VRING_KICK.
The code sends a kick to the rx queue. It is missing sending a
kick for the tx queue. This patch is to add the missing code to
comply with the spec.
[0]: https://fossies.org/linux/qemu/docs/specs/vhost-user.txt
Signed-off-by: Steven Luong <sluong@cisco.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
To use macro instead of magic number in order to enhance code
readability.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When use rte_eth_dev_configure() to enable rx queue interrupt for virtio
devices, virtio_init_device() isn't called to set up the interrupt
environment, which causes rx queue interrupt setup failed. This patch is
to fix this issue.
Fixes: 26b683b4f7 ("net/virtio: setup Rx queue interrupts")
Cc: stable@dpdk.org
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When virtio-net devices are bound to uio_pci_generic, we get
the wrong mac addr by virtio PMD. The wrong mac addr is a
addr that is 4-byte left shift of the correct addr.
It's a regression bug introduced by the cleanup patch below.
The condition of if we set use_msix should be if msix is
actually enabled. Only to check if there is a capability list
is not enough. For example, binding a transitional device
to uio_pci_device would trigger the wrong assignment of use_msix.
To correct that, we also check the flags of msix capability to
make sure it's enabled.
Fixes: ee1843bd89 ("net/virtio: remove redundant MSI-X detection")
Cc: stable@dpdk.org
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The current virtio supports Transmit Segmentation Offload, but
does not really support Large Receive Offload. The driver was confusing
the two offloads.
Fixes: 86d59b2146 ("net/virtio: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The virtio driver is confused about the meaning of the ip_checksum
flag. In DPDK, ip_checksum means the hardware is capable of checking
the Layer 3 IP checksum. But KVM/QEMU does not do that. The flag
VIRTIO_NET_F_GUEST_CSUM controls whether the receive side does
Layer 4 (TCP/UDP) checksum offload.
Fix by erroring out any requests to do IP checksum.
Fixes: 96cb671193 ("net/virtio: support Rx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Since "rte_eal_dev_init()" has been removed, the comment referred to
it should be modified simultaneously.
Fixes: 9721b4d543 ("eal: remove unused device init function")
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The rte_eth_dev.data pointer is set to a reference to a static table.
Attempting to rte_free() it leads to a panic. For example, the
following commands result in a panic if run in testpmd
testpmd> port attach virtio_user0,path=/dev/vhost-net,iface=test0
testpmd> port stop 2
testpmd> port close 2
testpmd> port detach 2
Fixes: ce2eabdd43 ("net/virtio-user: add virtual device")
Cc: stable@dpdk.org
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Zero the whole memory zone instead of the first few bytes.
Fixes: c1f86306a0 ("virtio: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
remove __rte_unused instances that are not required.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
vfio is the kernel framework used by the vfio-pci kernel driver.
DPDK drivers do not rely solely on vfio, but rather on vfio-pci to gain
access to pci resources.
Fixes: 0880c40113 ("drivers: advertise kmod dependencies in pmdinfo")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some customers find adding MAC addr to VF sometimes can fail,
but it is still stored in dev->data->mac_addrs[ ]. So this
can lead to some errors that assumes the non-zero entry in
dev->data->mac_addrs[ ] is valid.
Following acknowledgements are from specific NIC PMD
maintainer for their managing part.
This patch changes the ethdev internal API, it should not be
backported to a stable/LTS release so far.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The PCI code will move to the bus drivers directory.
Rename functions from rte_eal_pci_ to rte_pci_
to prepare the move of the driver out of EAL.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This commit fixs segment fault when rte_eth_dev_close() is called on
a virtio dev more than once. Assigning zero after free to avoids
freed memory to be accessed again.
Fixes: 69c80d4ef8 ("net/virtio: allocate queue at init stage")
Cc: stable@dpdk.org
Signed-off-by: Huanle Han <hanxueluo@gmail.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Segfault happens when using virtio-user after commit 7f0a669e7b
("ethdev: add allocation helper for virtual drivers").
It's due to we use ethdev->device to recognize physical devices,
but after above commit, this field is also filled for virtual
devices. Then we obtain the wrong pci_dev pointer and accessing
its field when copying pci info results in segfault.
To fix it, we use hw->virtio_user_dev to differentiate physical
devices from virtual devices.
Fixes: 6a7c0dfcdf ("net/virtio: do not depend on PCI device of ethdev")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The virtio port link status will always be DOWN:
The commit aa9f060617 ("net/virtio: fix link status always being up")
introduces a flag to help checking the status. If this flag is not set,
status will be always down. However, in dev start, this flag is set
after link status update, then we miss the chance to change the status
to UP in dev start.
To fix this bug, we simply move the link status update after the flag
setting so that the status can be correctly updated.
Fixes: aa9f060617 ("net/virtio: fix link status always being up")
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
As we already change to use capability list to detect MSI-X, remove
the redundant MSI-X detection in legacy devices.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
LSC flag is set in several places, but only the last one takes effect;
so we remove the redundant ones and just keep the last one.
This also fixes the bug that dev_flags being overwritten by
rte_eth_copy_pci_info(), which resets it to 0 unconditionally.
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The field, use_msix, in struct virtio_hw is not updated for modern
device, and is always zero. And now we depend on the status feature
and MSI-X to report LSC support (which is also not a correct
behavior). As a result, LSC is always disabled for modern devices.
To fix this, we just recognize MSI-X capability when going through
capability list, and update the info in virtio.
Fixes: 6ba1f63b5a ("virtio: support specification 1.0")
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Current virtio_dev_stop only disables interrupt and marks link down,
When it is invoked, tx/rx traffic flows still work. This is a strange
behavior. The patch supports the switch of flow.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
virtio-user cannot work on 32-bit system as higher 32-bit of the
addr field (64-bit) in the desc is filled with non-zero value
which should not happen for a 32-bit system.
In case of virtio-user, we use buf_addr of mbuf to fill the
virtqueue desc addr. This is a regression bug. For 32-bit system,
the first 4 bytes of mbuf is buf_addr, with following 8 bytes for
buf_phyaddr. With below wrong definition, both buf_addr and lower
4 bytes buf_phyaddr are obtained to fill the virtqueue desc.
#define VIRTIO_MBUF_ADDR(mb, vq) \
(*(uint64_t *)((uintptr_t)(mb) + (vq)->offset))
Fixes: 25f80d1087 ("net/virtio: fix packet corruption")
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Previously, we miss to set intr_handle->fd which will be used as
target file for epoll to check LSC.
As a result, stdin (0) is used and intr thread keeps busy whenever
data comes from stdin.
To fix this, we use vhostfd as the target file for epoll to check
the link status change events. And we move intr_handle initialization
after vhost backend settup to make sure vhostfd is initialized.
Fixes: 35c4f85548 ("net/virtio-user: support to report net status")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The virtio port link status will always be UP, even the port is stopped:
testpmd> port stop 0
Stopping ports...
Checking link statuses...
Port 0 Link Up - speed 10000 Mbps - full-duplex
Done
The link status is queried by link_update callback when LSC is disabled.
Which in turn queries the "status" field. However, the "status" is
read-only. I couldn't think of some proper ways to change the status
without doing device reset.
Instead of doing (the heavy) reset at stop, this patch introduced a flag,
which is set to 1 and 0 on start and stop, respectively. When it's set to
0, the link status is set to DOWN unconditionally.
Fixes: a85786dc81 ("virtio: fix states handling during initialization")
Cc: stable@dpdk.org
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
We only enabled LSC when using vhost-user as the backend, but it is
reported even when using vhost-kernel as the backend.
Fix it by only reportting LSC support when using vhost-user as the
backend.
Fixes: 35c4f85548 ("net/virtio-user: support to report net status")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
The feature negotiation in virtio-user is proven to be broken,
which results in device initialization failure.
Originally, we get features from vhost backend, and remove those
that are not supported. But when new feature is added, for example,
VIRTIO_NET_F_MTU, we fail to remove this new feature. Then, this
new feature will be negotiated, as both frontend and backend claim
to support this feature.
To fix it, we add a macro to record supported features, as a filter
to remove newly added features.
Fixes: 37a7eb2ae8 ("net/virtio-user: add device emulation layer")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
According to spec, we should write virtqueue index into the notify
address, rather than 1. Besides, some HW backend may rely on the data
written to identify which queue need to serve.
Fixes: 6ba1f63b5a ("virtio: support specification 1.0")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This is a preparation to embed the generic rte_device into the rte_eth_dev
also for virtual devices.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Secondary process doesn't properly attach to the rte_eth_device
initialized by the primary process.
Accessing device from secondary process (e.g. via rte_eth_rx_burst),
causes process to crash. because rte_eth_dev_data is not properly set.
The issue was flood by
'commit 7f95f78a8a ("ethdev: clear data when allocating device")'
which now clears rte_eth_dev_data entry.
For pci devices the struct is initialized by rte_eth_dev_pci_probe
->eth_dev_attach_secondary().
However, for virtio-user virtio_user_pmd_probe() is called instead of
rte_eth_dev_pci_probe().
The fix is to call rte_eth_dev_attach_secondary(), for secondary
process, from virtio_user_pmd_probe.
Fixes: 7f95f78a8a ("ethdev: clear data when allocating device")
Cc: stable@dpdk.org
Signed-off-by: Ami Sabo <amis@radware.com>
The patch change the prototype of callback function
(rte_intr_callback_fn) by removing the unnecessary parameter.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Now that the m->next pointer and m->nb_segs is expected to be set (to
NULL and 1 respectively) after a mempool_get(), we can avoid to write them
in the Rx functions of drivers.
Only some drivers are patched, it's not an exhaustive patch. It gives
the idea to do the same in other drivers.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Document the function and make it public, since it is used at several
places in the drivers. The old one is marked as deprecated.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
So far, virtio-user with vhost-user as the backend can only support
client mode. So when vhost user backend is down, i.e., unix socket
connection is broken, the connection cannot be re-connected. We will
forcely set the link state to be down.
Note: virtio-user with vhost-kernel as the backend still cannot
support lsc now as we fail to find a way to monitor the backend, tap
device, up/down events.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Originally, we did not report support of VIRTIO_NET_F_STATUS.
This feature is not reported by vhost backend, instead, it
is added/removed by QEMU in virtio PCI case.
We report the support of this feature so that following patch
will depend on this feature to enable LSC interrupt.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
For rxq interrupt, the device (backend driver) will notify driver
through callfd. Each virtqueue has a callfd. To keep compatible
with the existing framework, we will give these callfds to
interrupt thread for listening for interrupts.
Before that, we need to allocate intr_handle, and fill callfds
into it so that driver can use it to set up rxq interrupt mode.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Originally, eventfd is opened when initializing each vq; and gets closded
in virtio_user_stop_device().
To make it possible to initialize intr_handle struct in init() in following
patch, we put the open() of all eventfds into init(); and put the close()
into uninit().
Suggested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch adds a new option 'iface' to change the interface name of
tap device with vhost-kernel as backend.
Signed-off-by: Wenfeng Liu <liuwf@arraynetworks.com.cn>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch implements support for the Virtio MTU feature.
When negotiated, the host shares its maximum supported MTU,
which is used as initial MTU and as maximum MTU the application
can set.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The link state change interrupt can only be configured if the virtio device
supports MSIX. Prior to this change the writing of the vector to the PCI
config space was causing it to overwrite the initial part of the MAC
address since the MSIX vector is not in the config space and is occupied by
the MAC address.
This has been reproduced in Virtual Box (v5.0.30.r112061) in Windows 7.
Fixes: 954ea11540 ("virtio: do not report link state feature unless available")
Cc: stable@dpdk.org
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
virtio-user limits the qeueue number to 8 but provides no limit
check against the queue number input from user. If a bigger queue
number (> 8) is given, there is an overflow issue. Doing a sanity
check could avoid it.
Fixes: 37a7eb2ae8 ("net/virtio-user: add device emulation layer")
Cc: stable@dpdk.org
Signed-off-by: Wenfeng Liu <liuwf@arraynetworks.com.cn>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The valid tap file descriptor range should be equal or greater
than zero instead of non-zero
Fixes: e3b434818b ("net/virtio-user: support kernel vhost")
Cc: stable@dpdk.org
Signed-off-by: Wenfeng Liu <liuwf@arraynetworks.com.cn>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The minor change aims to remove the redundant computing and make
it easier to understand the code.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The chosen fake capability (10G) is consistent with the reported
link speed in virtio_dev_link_update():
link.link_speed = SPEED_10G;
The feature is not marked in doc/guides/nics/features/virtio.ini
because it is only a fake value.
Signed-off-by: Ido Barnea <ibarnea@cisco.com>
[Thomas: comments added]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
