IANA assigns a destination port of 4789 for the VXLAN in the Service
Name and Transport Protocol Port Number Registry. This is mentioned in
RFC 7348.
Fixes: f295a00a2b ("mbuf: add definitions of unified packet types")
Cc: stable@dpdk.org
Signed-off-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some PMDs need to know the tunnel type in order to handle advance TX
features. This patch adds a new TX offload flag for MPLS-in-UDP packets.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
rte_pktmbuf_headroom() and rte_pktmbuf_tailroom() should be usable
with any segment, not only with headered ones, so is_header should be 0
when we call for sanity check inside them.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There is no need for initializing the complete
packet buffer with zero as the packet data area will be
overwritten by the NIC Rx HW anyway.
The testpmd configures the packet mempool
with around 180k buffers with
2176B size. In existing scheme, the init routine
needs to memset around ~370MB vs the proposed scheme
requires only around ~22MB on 128B cache aligned system.
Useful in running DPDK in HW simulators/emulators,
where millions of cycles have an impact on boot time.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The debug assertions when allocating a raw mbuf are not correct since
commit 8f094a9ac5 ("mbuf: set mbuf fields while in pool"),
which triggers a panic when using this function in debug mode
Change the expected number of segments to 1 instead of 0, and
factorize these sanity checks.
Fixes: 8f094a9ac5 ("mbuf: set mbuf fields while in pool")
Signed-off-by: Gregory Etelson <gregory@weka.io>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
With GCC 7 we need to explicitly document when we are falling through from
one switch case to another.
Fixes: af75078fec ("first public release")
Fixes: 8bae1da2af ("hash: fallback to software CRC32 implementation")
Fixes: 9ec201f5d6 ("mbuf: provide bulk allocation")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This commit addresses the following errors:
In file included from /tmp/check-includes.sh.681.c:1:0:
build/include/rte_mbuf_ptype.h:587:35: error: unknown type name 'uint32_t'
[...]
build/include/rte_mbuf_ptype.h:662:51: error: unknown type name 'size_t'
[...]
Fixes: 288541c8ff ("mbuf: add functions to dump packet type")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
On i686 builds, the uin64_t type is 64-bits in size but is aligned to
32-bits only. This causes mbuf fields for rearm_data to not be 16-byte
aligned on 32-bit builds, which causes errors with some vector PMDs which
expect the rearm data to be aligned as on 64-bit.
Given that we cannot use the extra space in the data structures anyway, as
it's already used on 64-bit builds, we can just force alignment of the
physical address in the mbuf to 8-bytes in all cases. This has no effect on
64-bit systems, but fixes the updated PMDs on 32-bit.
Fixes: f4356d7ca1 ("net/i40e: eliminate mbuf write on rearm")
Fixes: f160666a10 ("net/ixgbe: eliminate mbuf write on rearm")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The reorganization of the mbuf structure induces an ABI breakage.
Bump the library version, and update the documentation accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Move this field in the second cache line, since no driver use it
in Rx path. The freed space will be used by a timestamp in next
commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Change the size of m->port and m->nb_segs to 16 bits. It is now possible
to reference a port identifier larger than 256 and have a mbuf chain
larger than 256 segments.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
To avoid multiple stores on fast path, Ethernet drivers
aggregate the writes to data_off, refcnt, nb_segs and port
to an uint64_t data and write the data in one shot
with uint64_t* at &mbuf->rearm_data address.
Some of the non-IA platforms have store operation overhead
if the store address is not naturally aligned.This patch
fixes the performance issue on those targets.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Set the value of m->refcnt to 1, m->nb_segs to 1 and m->next
to NULL when the mbuf is stored inside the mempool (unused).
This is done in rte_pktmbuf_prefree_seg(), before freeing or
recycling a mbuf.
Before this patch, the value of m->refcnt was expected to be 0
while in pool.
The objectives are:
- to avoid drivers to set m->next to NULL in the early Rx path, since
this field is in the second 64B of the mbuf and its access could
trigger a cache miss
- rationalize the behavior of raw_alloc/raw_free: one is now the
symmetric of the other, and refcnt is never changed in these functions.
To optimize the freeing of the segments, we try try to only update
m->refcnt, m->next, and m->nb_segs when it's required (idea from
Konstantin Ananyev <konstantin.ananyev@intel.com>).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Rename __rte_mbuf_raw_free() as rte_mbuf_raw_free() and make
it public. The old function is kept for compat but is marked as
deprecated.
The next commit changes the behavior of rte_mbuf_raw_free() to
make it more consistent with rte_mbuf_raw_alloc().
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Document the function and make it public, since it is used at several
places in the drivers. The old one is marked as deprecated.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
When possible, replace the uses of rte_mempool_create() with
the helper provided in librte_mbuf: rte_pktmbuf_pool_create().
This is the preferred way to create a mbuf pool.
This also updates the documentation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
mi->next will be assigned to NULL few lines later, trivial patch
Fixes: ea672a8b16 ("mbuf: remove the rte_pktmbuf structure")
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch adds function rte_pktmbuf_linearize to let crypto PMD coalesce
chained mbuf before crypto operation and extend their capabilities to
support segmented mbufs when device cannot handle them natively.
Included unit tests for rte_pktmbuf_linearize functionality:
1) Creates banch of segmented mbufs with different size and number of
segments.
2) Fills noncontigouos mbuf with sequential values.
3) Uses rte_pktmbuf_linearize to coalesce segmented buffer into one
contiguous.
4) Verifies data in linearized buffer.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add a new Tx flag in mbuf, that can be set by applications to
enable the MACsec offload for a packet to be transmitted.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Added API for `rte_eth_tx_prepare`
uint16_t rte_eth_tx_prepare(uint8_t port_id, uint16_t queue_id,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
Added fields to the `struct rte_eth_desc_lim`:
uint16_t nb_seg_max;
/**< Max number of segments per whole packet. */
uint16_t nb_mtu_seg_max;
/**< Max number of segments per one MTU */
These fields can be used to create valid packets according to the
following rules:
* For non-TSO packet, a single transmit packet may span up to
"nb_mtu_seg_max" buffers.
* For TSO packet the total number of data descriptors is "nb_seg_max",
and each segment within the TSO may span up to "nb_mtu_seg_max".
Added functions:
int
rte_validate_tx_offload(struct rte_mbuf *m)
to validate general requirements for tx offload set in mbuf of packet
such a flag completness. In current implementation this function is
called optionaly when RTE_LIBRTE_ETHDEV_DEBUG is enabled.
int rte_net_intel_cksum_prepare(struct rte_mbuf *m)
to prepare pseudo header checksum for TSO and non-TSO tcp/udp packets
before hardware tx checksum offload.
- for non-TSO tcp/udp packets full pseudo-header checksum is
counted and set.
- for TSO the IP payload length is not included.
int
rte_net_intel_cksum_flags_prepare(struct rte_mbuf *m, uint64_t ol_flags)
this function uses same logic as rte_net_intel_cksum_prepare, but
allows application to choose which offloads should be taken into
account, if full preparation is not required.
PERFORMANCE TESTS
-----------------
This feature was tested with modified csum engine from test-pmd.
The packet checksum preparation was moved from application to Tx
preparation step placed before burst.
We may expect some overhead costs caused by:
1) using additional callback before burst,
2) rescanning burst,
3) additional condition checking (packet validation),
4) worse optimization (e.g. packet data access, etc.)
We tested it using ixgbe Tx preparation implementation with some parts
disabled to have comparable information about the impact of different
parts of implementation.
IMPACT:
1) For unimplemented Tx preparation callback the performance impact is
negligible,
2) For packet condition check without checksum modifications (nb_segs,
available offloads, etc.) is 14626628/14252168 (~2.62% drop),
3) Full support in ixgbe driver (point 2 + packet checksum
initialization) is 14060924/13588094 (~3.48% drop)
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Fixes typos present in the documentation and code comments.
Signed-off-by: Alain Leon <xerebz@gmail.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Previous patch updated the functions without updating all the comments.
Fixes: 591a9d7985 ("add FILE argument to debug functions")
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: John McNamara <john.mcnamara@intel.com>
When receiving coalesced packets in virtio, the original size of the
segments is provided. This is a useful information because it allows to
resegment with the same size.
Add a RX new flag in mbuf, that can be set when packets are coalesced by
a hardware or virtual driver when the m->tso_segsz field is valid and is
set to the segment size of original packets.
This flag is used in next commits in the virtio pmd.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Following discussions in [1] and [2], introduce a new bit to
describe the Rx checksum status in mbuf.
Before this patch, only one flag was available:
PKT_RX_L4_CKSUM_BAD: L4 cksum of RX pkt. is not OK.
And same for L3:
PKT_RX_IP_CKSUM_BAD: IP cksum of RX pkt. is not OK.
This had 2 issues:
- it was not possible to differentiate "checksum good" from
"checksum unknown".
- it was not possible for a virtual driver to say "the checksum
in packet may be wrong, but data integrity is valid".
This patch tries to solve this issue by having 4 states (2 bits)
for the IP and L4 Rx checksums. New values are:
- PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum
-> the application should verify the checksum by sw
- PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong
-> the application can drop the packet without additional check
- PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid
-> the application can accept the packet without verifying the
checksum by sw
- PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet
data, but the integrity of the L4 data is verified.
-> the application can process the packet but must not verify the
checksum by sw. It has to take care to recalculate the cksum
if the packet is transmitted (either by sw or using tx offload)
And same for L3 (replace L4 by IP in description above).
This commit tries to be compatible with existing applications that
only check the existing flag (CKSUM_BAD).
[1] http://dpdk.org/ml/archives/dev/2016-May/039920.html
[2] http://dpdk.org/ml/archives/dev/2016-June/040007.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The functions rte_get_rx_ol_flag_name() and rte_get_tx_ol_flag_name()
can dump one flag, or set of flag that are part of the same mask (ex:
PKT_TX_UDP_CKSUM, part of PKT_TX_L4_MASK). But they are not designed to
dump the list of flags contained in mbuf->ol_flags.
This commit introduce new functions to do that. Similarly to the packet
type dump functions, the goal is to factorize the code that could be
used in several applications and reduce the risk of desynchronization
between the flags and the dump functions.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
An IPv4 packet is considered as a fragment if:
- MF (more fragment) bit is set
- or Fragment_Offset field is non-zero
Update the API documentation of packet types to reflect this.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Dumping the packet type is useful for debug purposes. Instead
of having each application providing its function to do that,
introduce functions to do it.
It factorizes the code and reduces the risk of desynchronization between
the new packet types and the dump function.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add support of Nvgre tunnels in rte_net_get_ptype(). At the same
time, as Nvgre transports Ethernet, we need to add the support for inner
Vlan, QinQ, and Mpls.
Signed-off-by: Jean Dao <jean.dao@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add a new RTE_PTYPE_L2_ETHER_QINQ packet type, and its support in
rte_net_get_ptype().
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add a new RTE_PTYPE_L2_ETHER_VLAN packet type, and its support in
rte_net_get_ptype().
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The file rte_mbuf.h starts to be quite big, and next commits
will introduce more functions related to packet types. Let's
move them in a new file.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Introduce a new function to read the packet data from an mbuf chain. It
linearizes the data if required, and also ensures that the mbuf is large
enough.
This function is used in next commits that add a software parser to
retrieve the packet type.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
To support tunneling packet offload capabilities on Tx side, PMDs
(e.g., i40e) need to know what kind of tunneling type of this packet.
Instead of analyzing the packet itself, we depend on applications to
correctly set the tunneling type. These flags are defined inside
rte_mbuf.ol_flags.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Some application use rte_mbuf_raw_alloc() function to improve
performance by not resetting mbuf's fields to their default state.
This can be however problematic for mbuf consumers that need some
headroom, meaning that data_off field gets decremented after
allocation. When the mbuf is re-used afterwards, there might not
be enough room for the consumer to prepend anything, if the data_off
field is not reset to its default value.
This patch adds a new rte_pktmbuf_reset_headroom() function that
applications can call to reset the data_off field.
This patch also replaces current data_off affectations in the mbuf
lib with a call to this function.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
On error, the mempool object has to be freed, and rte_errno should be a
positive value.
Fixes: 152ca51790 ("mbuf: use default mempool handler from config")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Exported header files used by applications should allow the strictest
compiler flags. Language extensions used in many places must be explicitly
marked to avoid warnings and compilation failures.
Unnamed structs/unions are allowed since C11, however many compiler
versions do not use this mode by default.
This commit prevents the following errors:
error: ISO C99 doesn't support unnamed structs/unions
error: struct has no named members
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Exported header files used by applications should allow the strictest
compiler flags. Language extensions used in many places must be explicitly
marked or removed to avoid warnings and compilation failures.
This commit prevents the following errors:
error: type of bit-field `[...]' is a GCC extension
Note: the standard does not require implementations to issue a diagnostic
message with these, and such errors do not occur with recent GCC or clang
versions. However, GCC 4.7 is still common and using the extension keyword
is easier than checking compiler version.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Exported header files used by applications should allow the strictest
compiler flags. Language extensions used in many places must be explicitly
marked or removed to avoid warnings and compilation failures.
The extension keyword is used whenever the C99 syntax cannot do it.
This commit prevents the following errors:
error: ISO C forbids zero-size array `[...]'
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The function __rte_mbuf_raw_alloc was reserved for internal use and
has been deprecated in favor of the public function rte_mbuf_raw_alloc.
It can be safely removed now.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In rte_pktmbuf_pool_create(), the rte_errno variable was not always
set on failure.
Fixes: 152ca51790 ("mbuf: use default mempool handler from config")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Following the discussions from:
http://dpdk.org/ml/archives/dev/2015-July/021721.htmlhttp://dpdk.org/ml/archives/dev/2016-April/038143.html
The value of these flags is 0, making them useless. Today, no example
application checks them on Rx, and only few drivers sets them and
silently give wrong packets to the application, which should not happen.
This patch removes the unused flags from rte_mbuf and their use in the
drivers. The i40e and fm10k are kept as they are today and should be
fixed to drop bad packets. The enic driver is managed by its maintainer
in another patch.
Fixes: c22265f6 ("mbuf: add new packet flags for i40e")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Do not add 0x when using %p in format strings to avoid dump messages
with double 0x0x, e.g.,
dump mbuf at 0x0x7fac7b17c800, phys=17b17c880, buf_len=2176
pkt_len=2064, ol_flags=0, nb_segs=1, in_port=255
segment at 0x0x7fac7b17c800, data=0x0x7fac7b17c8f0, data_len=2064
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
By default, the mempool ops used for mbuf allocations is a multi
producer and multi consumer ring. We could imagine a target (maybe some
network processors?) that provides an hardware-assisted pool
mechanism. In this case, the default configuration for this architecture
would contain a different value for RTE_MBUF_DEFAULT_MEMPOOL_OPS.
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
