Use mempool bulk get ops to alloc burst of packets and process them.
If bulk get fails fallback to rte_mbuf_raw_alloc.
Tested-by: Yingya Han <yingyax.han@intel.com>
Suggested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Move the packet prepare logic into a separate function so that it
can be reused later.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use bulk ops for allocating segments instead of having a inner loop
for every segment.
This reduces the number of calls to the mempool layer.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Testpmd txonly copies the src/dst mac address of the port being
processed to ethernet header structure on the stack for every packet.
Move it outside the loop and reuse it.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable DEV_TX_OFFLOAD_VLAN_INSERT also along with
DEV_TX_OFFLOAD_VLAN_QINQ in tx_qinq_set() as it takes
both vlan id's as arguments.
Fixes: 597f9fafe1 ("app/testpmd: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tx VLAN & QinQ insert enable need not depend on
Rx VLAN offload ETH_VLAN_EXTEND_OFFLOAD. For Tx VLAN
insert enable, error check is now to see if QinQ was enabled
but only single VLAN id is set.
Fixes: 6a34f91690 ("app/testpmd: fix error message when setting Tx VLAN")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch added new item "vxlan-gpe" to tunnel_type to
support new VXLAN-GPE packet type, and its classification.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When removing a rte_device on a port-based request,
all the sibling ports must be marked as closed.
The iterator loop can be simplified by using the dedicated macro.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
sprintf function is not secure as it doesn't check the length of string.
More secure function snprintf is used.
Fixes: 473d1bebce ("hash: allow to store data in hash table")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
sprintf function is not secure as it doesn't check the length of string.
replaced sprintf with strlcpy.
Fixes: f74df2c57e ("test/distributor: test single and burst API")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This commit adds lock-free stack variants of stack_autotest
(stack_lf_autotest) and stack_perf_autotest (stack_lf_perf_autotest), which
differ only in that the lock-free versions pass the RTE_STACK_F_LF flag to
all rte_stack_create() calls.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
stack_perf_autotest tests the following with one lcore:
- Cycles to attempt to pop an empty stack
- Cycles to push then pop a single object
- Cycles to push then pop a burst of 32 objects
It also tests the cycles to push then pop a burst of 8 and 32 objects with
the following lcore combinations (if possible):
- Two hyperthreads
- Two physical cores
- Two physical cores on separate NUMA nodes
- All available lcores
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
stack_autotest performs positive and negative testing of the stack API, and
exercises the push and pop datapath functions with all available lcores.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Operations to set/update bit-fields often cause compilers
to generate suboptimal code.
To help avoid such situation for tx_offload fields:
introduce new enum for tx_offload bit-fields lengths and offsets,
and new function to generate raw tx_offload value.
Add new test-case into UT for introduced function.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Currently, compress-perf doesn't respect incompressible
data inside one operation.
This patch adds such a functionality. Now the output buffer
in one operation is big enough to store such a data after
compression. Also added segment size checking to pass
values in right range.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
crypto pmds are queried to check if Sign and Decrypt
with CRT keys or exponent is supported, thus call
operation with relevant key type.
Signed-off-by: Ayuj Verma <ayverma@marvell.com>
Signed-off-by: Shally Verma <shallyv@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates the unit test to enable AESNI-MB PMD
out-of-place tests. A special test type that swap both
the source and destination buffer is added for a more
comprehensive test set to take place.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds new test structure for modexp
and modinv for asymmetric cryptography.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Add test case for encryption, decryption for snow3g when digest
is encrypted
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
sprintf function is not secure as it doesn't check the length of string.
More secure function snprintf is used.
Fixes: 2a9c83ae3b ("test/eventdev: add multi-ports test")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Add option to provide a global dequeue timeout that is used to create
the eventdev.
The dequeue timeout provided will be common across all the worker
ports. If the eventdev hardware supports power management through
dequeue timeout then this option can be used for verifying power
demands at various packet rates.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Check if eventdev is open system eventdevs i.e. max_num_events = -1
before asserting.
Allow event timer adapter to adjust the resolution using
RTE_EVENT_TIMER_ADAPTER_F_ADJUST_RES and re-calculate timeout ticks
based on the adjusted resolution.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Check if timer adapter is already started before starting it.
Update the unit test accordingly.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Add unit test to check for hash lookup and bulk-lookup perf for
extendable bucket feature.
It is tested with both lock-free enabled and lock-free disabled case.
Test includes:
- hash lookup on keys in ext bkt
- hash delete causing key-shifts of keys from ext bkt to secondary bkt
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Added meson workarounds to build helloworld on Windows.
Windows currently only supports kvargs and eal libraries.
This change restricts the build flow to supported libraries
only.
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
sprintf function is not secure as it doesn't check the length of string.
More secure function strlcat is used.
Fixes: 727909c592 ("app/test: introduce dynamic commands list")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Testpmd can generate multiple flows without taking much cost and this
could be a simple traffic generator for developer's quick tests.
If "--txonly-multi-flow" is specified in the command line, IP source
address is varied to generate multiple flows.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This commit uses the MTU fields populated in rte_eth_dev_info_get()
to validate the MTU value being passed in port_mtu_set().
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a new "show/clear fwd stats all" command to display fwd and port
statistics on the fly.
To be able to do so, the (testpmd only) rte_port structure can't be used
to maintain any statistics.
Moved the stats dump parts from stop_packet_forwarding() and merge with
fwd_port_stats_display() into fwd_stats_display().
fwd engine statistics are then aggregated into a local per port array.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Caught by code review while investigating the fwd stats display code.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
fwd engine statistics are stored as unsigned int (32bits) and can wrap
quite quickly.
Example: sending 7mpps for 614s gives us 4298000000 packets =>
0x1002e4680 larger than 32bits.
testpmd reports forwarding stats as:
RX-packets: 3500381 TX-packets: 3500010 TX-dropped: 371
While the port and accumulated stats are reported as 64bits:
RX-packets: 4298467677 RX-dropped: 0 RX-total: 4298467677
TX-packets: 4298467306 TX-dropped: 371 TX-total: 4298467677
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Having the standard stats and the rx burst stats on the same line gives a
really long line and is not consistent with the rest.
Before:
iofwd engine
RX-packets: 121811360 TX-packets: 121811392 TX-dropped: 0 RX-bursts : 3806605 [100% of 32 pkts]
TX-bursts : 3806606 [100% of 32 pkts]
csum engine
RX-packets: 5467488 TX-packets: 5467520 TX-dropped: 0 RX- bad IP checksum: 0 Rx- bad L4 checksum: 0 Rx- bad outer L4 checksum: 0
RX-bursts : 170859 [100% of 32 pkts]
TX-bursts : 170860 [100% of 32 pkts]
After:
iofwd engine
RX-packets: 259770560 TX-packets: 259770592 TX-dropped: 0
RX-bursts : 8117830 [100% of 32 pkts]
TX-bursts : 8117831 [100% of 32 pkts]
csum engine
RX-packets: 7834016 TX-packets: 7834048 TX-dropped: 0 RX- bad IP checksum: 0 Rx- bad L4 checksum: 0 Rx- bad outer L4 checksum: 0
RX-bursts : 244813 [100% of 32 pkts]
TX-bursts : 244814 [100% of 32 pkts]
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix following build error with musl libc:
app/test/test_eal_flags.c:152:55: error:
'O_RDONLY' undeclared (first use in this function)
fd = openat(dirfd(hugepage_dir), dirent->d_name, O_RDONLY);
^~~~~~~~
Fixes: 45f1b6e868 ("app: add new tests on eal flags")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
in app/test/meson.build the default_cflag is never used so the
-D_GNU_SOURCE was never passed as intended.
Fixes the following build error with musl libc:
lib/librte_eal/common/include/rte_lcore.h:26:9: error:
unknown type name 'cpu_set_t'
typedef cpu_set_t rte_cpuset_t;
^~~~~~~~~
The problem is that cpu_set_t is only defined when _GNU_SOURCE is set.
Fixes: 5d7b673d5f ("mk: build with _GNU_SOURCE defined by default")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Currently, while there is a way to find total amount of used/free
space in an fbarray, there is no way to find biggest contiguous
chunk. Add such API, as well as unit tests to test this API.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
The type of value parameter to rte_service_attr_get
should be uint64_t *, since the attributes
are of type uint64_t.
Fixes: 4d55194d76 ("service: add attribute get function")
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch replaces macro with log-level based approach to print debug
information. Need to set timer log type to debug using the following
eal parameter: --log-level=test.timer:debug
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch enables compilation of print_key_info() always using
log-level based approach instead of a macro. Need to set efd log type
to debug to print debug information, using the following eal parameter:
--log-level=test.efd:debug
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Need to set hash log type to debug to print debug information, using
following eal parameter: --log-level=test.hash:debug
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add test cases for ticket lock, recursive ticket lock,
and ticket lock performance.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Instead of getting timestamp per iteration, amortize its
overhead can help to get more precise benchmarking results.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add performance test on all available cores to benchmark
the scaling up performance of rw_lock.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Suggested-by: Gavin Hu <gavin.hu@arm.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Instead of getting timestamps per iteration, amortize its overhead
can help getting more precise benchmarking results.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The test is to benchmark the performance of spinlock by counting the
number of spinlock acquire and release operations within the specified
time.
A typical pair of lock and unlock operations costs tens or hundreds of
nano seconds, in comparison to this, delaying 1 us outside of the locked
region is too much, compromising the goal of benchmarking the lock and
unlock performance.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add macro to align value to the nearest multiple of the given value,
resultant value might be greater than or less than the first parameter
whichever difference is the lowest.
Update unit test to include the new macro.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Use eal's RTE_INIT abstraction for defining constructors.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
pdump unit test has dependency on pthread code
in test.c and process.h to run send_pkts(),
this code should be enabled only when
CONFIG_RTE_LIBRTE_PDUMP is enabled.
Bugzilla ID: 222
Fixes: 086eb64db3 ("test/pdump: add unit test for pdump library")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
