Split use_simple_rxtx into use_simple_rx and use_simple_tx,
and ensure that only use_simple_tx is updated when txq flags
forces to use the standard Tx handler.
This change is also useful for next commit (disable simple Rx
path when Rx checksum is requested).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
LSC flag is set in several places, but only the last one takes effect;
so we remove the redundant ones and just keep the last one.
This also fixes the bug that dev_flags being overwritten by
rte_eth_copy_pci_info(), which resets it to 0 unconditionally.
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The virtio port link status will always be UP, even the port is stopped:
testpmd> port stop 0
Stopping ports...
Checking link statuses...
Port 0 Link Up - speed 10000 Mbps - full-duplex
Done
The link status is queried by link_update callback when LSC is disabled.
Which in turn queries the "status" field. However, the "status" is
read-only. I couldn't think of some proper ways to change the status
without doing device reset.
Instead of doing (the heavy) reset at stop, this patch introduced a flag,
which is set to 1 and 0 on start and stop, respectively. When it's set to
0, the link status is set to DOWN unconditionally.
Fixes: a85786dc816f ("virtio: fix states handling during initialization")
Cc: stable@dpdk.org
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch implements support for the Virtio MTU feature.
When negotiated, the host shares its maximum supported MTU,
which is used as initial MTU and as maximum MTU the application
can set.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
virtio-user limits the qeueue number to 8 but provides no limit
check against the queue number input from user. If a bigger queue
number (> 8) is given, there is an overflow issue. Doing a sanity
check could avoid it.
Fixes: 37a7eb2ae816 ("net/virtio-user: add device emulation layer")
Cc: stable@dpdk.org
Signed-off-by: Wenfeng Liu <liuwf@arraynetworks.com.cn>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add handler in virtio_pci_ops to set queue/irq bind.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
We need to define a prototype for such wrapper, which makes thing
too complicated. Remove wrapper and call set_config_irq directly.
Suggested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
hw->dev, a pointer to pci_dev, was actually not used, until the
refactor of decouping from PCI device. This would somehow break
the multiple process again, since "hw" is stored at shared memory,
while "pci_dev" is not: the primary and secondary process could
have different address for it, while just one value is allowed.
Thus we should not store it to "hw", instead, we could retrieve
it from the "eth_dev->device" field.
Fixes: ae34410a8a8a ("ethdev: move info filling of PCI into drivers")
Fixes: eac901ce29be ("ethdev: decouple from PCI device")
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Since commit 0e1b45a284b4 ("ethdev: decouple interrupt handling from
PCI device"), intr_handle is stored at eth_dev struct, that we could
use it directly. Thus there is no need to get it from hw.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The introduce of virtio 1.0 support brings yet another set of ops, badly,
it's not handled correctly, that it breaks the multiple process support.
The issue is the data/function pointer may vary from different processes,
and the old used to do one time set (for primary process only). That
said, the function pointer the secondary process saw is actually from the
primary process space. Accessing it could likely result to a crash.
Kudos to the last patches, we now be able to maintain those info that may
vary among different process locally, meaning every process could have its
own copy for each of them, with the correct value set. And this is what
this patch does:
- remap the PCI (IO port for legacy device and memory map for modern
device)
- set vtpci_ops correctly
After that, multiple process would work like a charm. (At least, it
passed my fuzzy test)
Fixes: b8f04520ad71 ("virtio: use PCI ioport API")
Fixes: d5bbeefca826 ("virtio: introduce PCI implementation structure")
Fixes: 6ba1f63b5ab0 ("virtio: support specification 1.0")
Cc: stable@dpdk.org
Reported-by: Juho Snellman <jsnell@iki.fi>
Reported-by: Yaron Illouz <yaroni@radcom.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Like vtpci_ops, the rte_pci_ioport has to store in local memory. This
is basically for the rte_pci_device field is allocated from process
local memory, but not from shared memory.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
We used to store the vtpci_ops at virtio_hw structure. The struct,
however, is stored in shared memory. That means only one value is
allowed. For the multiple process model, however, the address of
vtpci_ops should be different among different processes.
Take virtio PMD as example, the vtpci_ops is set by the primary
process, based on its own process space. If we access that address
from the secondary process, that would be an illegal memory access,
A crash then might happen.
To make the multiple process model work, we need store the vtpci_ops
in local memory but not in a shared memory. This is what the patch
does: a local virtio_hw_internal array of size RTE_MAX_ETHPORTS is
allocated. This new structure is used to store all these kind of
info in a non-shared memory. Current, we have:
- vtpci_ops
- rte_pci_ioport
- virtio pci mapped memory, such as common_cfg.
The later two will be done in coming patches. Later patches would also
set them correctly for secondary process, so that the multiple process
model could work.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This adds a helper to get the rte_intr_handle from the virtio_hw. This is
safe to do since the usage of the helper is guarded by RTE_ETH_DEV_INTR_LSC
which is only set if we found a PCI device during initialization.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The "hw->started" field was introduced to stop touching queues
on restart. We never touches queues on restart any more, thus
it's safe to remove this flag.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Queue allocation should be done once, since the queue related info (such
as vring addreess) will only be informed to the vhost-user backend once
without virtio device reset.
That means, if you allocate queues again after the vhost-user negotiation,
the vhost-user backend will not be informed any more. Leading to a state
that the vring info mismatches between virtio PMD driver and vhost-backend:
the driver switches to the new address has just been allocated, while the
vhost-backend still sticks to the old address has been assigned in the init
stage.
Unfortunately, that is exactly how the virtio driver is coded so far: queue
allocation is done at queue_setup stage (when rte_eth_tx/rx_queue_setup is
invoked). This is wrong, because queue_setup can be invoked several times.
For example,
$ start_testpmd.sh ... --txq=1 --rxq=1 ...
> port stop 0
> port config all txq 1 # just trigger the queue_setup callback again
> port config all rxq 1
> port start 0
The right way to do is allocate the queues in the init stage, so that the
vring info could be persistent with the vhost-user backend.
Besides that, we should allocate max_queue pairs the device supports, but
not nr queue pairs firstly configured, to make following case work.
$ start_testpmd.sh ... --txq=1 --rxq=1 ...
> port stop 0
> port config all txq 2
> port config all rxq 2
> port start 0
Since the allocation is switched to init stage, the free should also
moved from the rx/tx_queue_release to dev close stage. That leading we
could do nothing an empty rx/tx_queue_release() implementation.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add the ability to reset the virtio device in the configure callback
if the features flag changed since previous reset. This will be possible
with the introduction of offload support in next commits.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Move the configuration of control queue in the configure callback.
This is needed by next commit, which introduces the reinitialization
of the device in the configure callback to change the feature flags.
Therefore, the control queue will have to be restarted at the same
place.
As virtio_dev_cq_queue_setup() is called from a place where
config->max_virtqueue_pairs is not available, we need to store this in
the private structure. It replaces max_rx_queues and max_tx_queues which
have the same value. The log showing the value of max_rx_queues and
max_tx_queues is also removed since config->max_virtqueue_pairs is
already displayed above.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Negotiate VIRTIO_F_IOMMU_PLATFORM to have IOMMU support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add modern device id and rename VIRTIO_PCI_DEVICEID_MIN to
VIRTIO_PCI_LEGACY_DEVICEID_NET. While at it, remove unused macros too.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Removed unnecessary compile time dependency on "use_simple_rxtx".
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch moves phys addr check from virtio_dev_queue_setup
to pci ops. To make that happen, make sure virtio_ops.setup_queue
return the result if we pass through the check.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
We keep a common vq structure, containing only vq related fields,
and then split others into RX, TX and control queue respectively.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
[Jianfeng Tan: found and fixed 2 bugs]
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The "drv_flags" is set with device as the input, which means different
device (say, modern vs legacy) could end up with a different value. And
the fact that "drv_flags" is shared by all devices means that every time
we add a new device, it simply overwrites the value configured from the
last device.
Therefore, when two virtio devices have different flags, it may lead to
wrong result, such as virtio would set irq config when it's not supported.
Making the flag per device (using "dev->data->dev_flags") could let us
have different value for each device, which would avoid the above issue.
Fixes: da978dfdc43 ("virtio: use port IO to get PCI resource")
Reported-by: David Marchand <david.marchand@6wind.com>
Suggested-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Move all os / arch specifics to eal.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Santosh Shukla <sshukla@mvista.com>
Tested-by: Santosh Shukla <sshukla@mvista.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Modern (v1.0) virtio pci device defines several pci capabilities.
Each cap has a configure structure corresponding to it, and the
cap.bar and cap.offset fields tell us where to find it.
Firstly, we map the pci resources by rte_eal_pci_map_device().
We then could easily locate a cfg structure by:
cfg_addr = dev->mem_resources[cap.bar].addr + cap.offset;
Therefore, the entrance of enabling modern (v1.0) pci device support
is to iterate the pci capability lists, and to locate some configs
we care; and they are:
- common cfg
For generic virtio and virtqueue configuration, such as setting/getting
features, enabling a specific queue, and so on.
- nofity cfg
Combining with `queue_notify_off' from common cfg, we could use it to
notify a specific virt queue.
- device cfg
Where virtio_net_config structure is located.
- isr cfg
Where to read isr (interrupt status).
If any of above cap is not found, we fallback to the legacy virtio
handling.
If succeed, hw->vtpci_ops is assigned to modern_ops, where all
operations are implemented by reading/writing a (or few) specific
configuration space from above 4 cfg structures. And that's basically
how this patch works.
Besides those changes, virtio 1.0 introduces a new status field:
FEATURES_OK, which is set after features negotiation is done.
Last, set the VIRTIO_F_VERSION_1 feature flag.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Reviewed-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Switch to 64 bit features, which virtio 1.0 supports.
While legacy virtio only supports 32 bit features, it complains aloud
and quit when trying to setting > 32 bit features.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Reviewed-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Introduce struct virtio_pci_ops, to let legacy virtio (v0.95) and
modern virtio (1.0) have different implementation regarding to a
specific pci action, such as read host status.
With that, this patch reimplements all exported pci functions, in
a way like:
vtpci_foo_bar(struct virtio_hw *hw)
{
hw->vtpci_ops->foo_bar(hw);
}
So that we need pay attention to those pci related functions only
while adding virtio 1.0 support.
This patch introduced a new vtpci function, vtpci_init(), to do
proper virtio pci settings. It's pretty simple so far: just sets
hw->vtpci_ops to legacy_ops as we don't support 1.0 yet.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Reviewed-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Huawei Xie <huawei.xie@intel.com>
offset arg of vtpci_read/write_dev_config is derived from offsetof(),
which is of size_t type, instead of uint64_t. So, define it as size_t
type.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Reviewed-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Change the features from bit mask to bit number. This allows the
DPDK driver to use the definitions from Linux (yes the header
files already use a license compatiable with DPDK). This makes DPDK
driver handle future feature bit changes.
Get rid of double negative code in the feature bit intialization.
Instead just have a new define with the list of feature bits implemented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Move virtio PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
