The VXLAN related definitions and structures are moved from
rte_ether.h to a new header file: rte_xvlan.h.
Also introducing a new define macro for VXLAN default port id:
RTE_VXLAN_DEFAULT_PORT
Signed-off-by: Flavia Musatescu <flavia.musatescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Raslan Darawsheh <rasland@mellanox.com>
Those two defines have been missed.
Fixes: 35b2d13fd6 ("net: add rte prefix to ether defines")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Define MEMIF_SOCKET_UN_SIZE to size of unix domain socket address.
Report error in case of longer path.
Fixes: b923866c69 ("net/memif: allow for full key size in socket name")
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable testpmd to forward GTP packet in csum fwd mode.
A GTP header structure (without optional fields and extension header)
is defined in new rte_gtp.h.
A parser function in testpmd is added. GTPU and GTPC packets are both
supported, with respective UDP destination port and GTP message type.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Many features require to store data inside the mbuf. As the room in mbuf
structure is limited, it is not possible to have a field for each
feature. Also, changing fields in the mbuf structure can break the API
or ABI.
This commit addresses these issues, by enabling the dynamic registration
of fields or flags:
- a dynamic field is a named area in the rte_mbuf structure, with a
given size (>= 1 byte) and alignment constraint.
- a dynamic flag is a named bit in the rte_mbuf structure.
The typical use case is a PMD that registers space for an offload
feature, when the application requests to enable this feature. As
the space in mbuf is limited, the space should only be reserved if it
is going to be used (i.e when the application explicitly asks for it).
The registration can be done at any moment, but it is not possible
to unregister fields or flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Remove redundant data structure fields from port level data
structures and update the release notes.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
This patch enables the unaligned chunks feature for AF_XDP which allows
chunks to be placed at arbitrary places in the umem, as opposed to them
being required to be aligned to 2k. This allows for DPDK application
mempools to be mapped directly into the umem and in turn enable zero copy
transfer between umem and the PMD.
This patch replaces the zero copy via external mbuf mechanism introduced
in commit e9ff8bb719 ("net/af_xdp: enable zero copy by external mbuf").
The pmd_zero copy vdev argument is also removed as now the PMD will
auto-detect presence of the unaligned chunks feature and enable it if so
and otherwise fall back to copy mode if not detected.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add new rte_flow_item_higig2_hdr in order to match higig2 header.
It is a layer 2.5 protocol and used in Broadcom switches.
Header format is based on the following document.
http://read.pudn.com/downloads558/doc/comm/2301468/HiGig_protocol.pdf
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This commit adds support for matching flows on Geneve headers.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add ice_create_fdir_filter to create a rule. If a flow is matched by
flow director filter, filter rule will be set to HW. For now common
pattern and queue/passthru/drop/mark actions are supported.
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
The patch reworks packet process engine's binary classifier
(switch) for the new framework. It also adds support for new
packet type like PPPoE for switch filter.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Added a devarg to control the mode in generic flow API.
We use none-pipeline mode by default.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
The rte_vhost_dequeue_burst supports two ways of dequeuing data.
If the data fits into a buffer, then all data is copied and a
single linear buffer is returned. Otherwise it allocates
additional mbufs and chains them together to return a multiple
segments mbuf.
While that covers most use cases, it forces applications that
need to work with larger data sizes to support multiple segments
mbufs. The non-linear characteristic brings complexity and
performance implications to the application.
To resolve the issue, add support to attach external buffer
to a pktmbuf and let the host provide during registration if
attaching an external buffer to pktmbuf is supported and if
only linear buffer are supported.
Signed-off-by: Flavio Leitner <fbl@sysclose.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixed the bug that a failure appeared when config
rx_offload crc_strip using command "port config all crc-strip
on|off". The reason is that this command was removed in Commit
e5db17a1e5. The current command is "port config <port_id>
rx_offload keep_crc on|off" instead.
In this patch, some codes left over about 'crc_strip' are
removed to make the current command clearer.
Fixes: e5db17a1e5 ("app/testpmd: remove duplicated Rx offload commands")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Retrieve burst mode options according to the selected Rx/Tx burst
function name.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Retrieve burst mode options according to the selected Rx/Tx burst
function name.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Some PMDs have more than one Rx/Tx burst paths, add the ethdev API
that allows an application to retrieve the mode information about
Rx/Tx packet burst such as Scalar or Vector, and Vector technology
like AVX2.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Segregate QinQ from Extend Offload and support QinQ offload
in vlan set command. Merge all port wise rx vlan offloads in
command line help and documentation for a cleaner structure.
Fix port info display to distinguish between qinq strip and
extend offloads. Flatten all VLAN offload info into a single
line to reduce info length.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch is to validate the filter rules, which includes
ntuple filter, ethertype filter and fdir filter. The packets
type that supported are BGP,VRRP,LACP,ARP and ICMP.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch adds fdir config operation, including set fdir filter,
normal filter, set and clear fdir tcam.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch adds unicast and multicast set interfaces.
Application can add or remove unicast MAC address, also can set
multicast MAC address, the maximum multicast list size is 2048.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
When enable allmulticast mode, all multicast packets
can be received. This patch also adds support for MTU set,
the range of MTU is from 256 to 9600.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Add mbox command channel for SR-IOV, which is used to
communicate between VF and VF, VF and PF. This patch
introduces data structures, initialization, interfaces
and commands of mbox channel.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch add link related operations like
link update, up and down.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
To update MAC address or MTU, operations are
added to the driver.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add support for supported packet types
by the platform andbasic statistics like
numbers of packets/bytes receive and transmit.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
pfe (packet forwarding engine) is a network
poll mode driver for NXP SoC ls1012a.
This patch introduces the framework of pfe
driver with basic functions of initialisation
and teardown.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Flow Manager API is the new firmware interface that exposes match
action capabilities in 1400 series VIC adapters. It is intended for
virtual switch offloads and enables more advanced features than the
existing filter API. For example, it supports VXLAN encap and decap
actions, and exposes TCAM and exact match tables.
Add the new flow implementation using Flow Manager and use it when
available. When Flow Manager is not available, the driver will
continue to use the old filter-based flow implementation.
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Latest firmware supports Geneve with options offload. Current overlay
offload only supports Geneve with no options. This new feature is
disabled by default, as it is intrusive and cannot be used with flow
API. Add a new devarg 'geneve-opt' so the user can explicitly enable
it.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Patch adds a runtime function to display port supported ptypes
in different layers.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add new rte_flow_item_ah in order to match the Authentication Header
based on RFC 2402.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_igmp in order to match the Internet Group
Management Protocol based on RFC 2236.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
