This patch moves phys addr check from virtio_dev_queue_setup
to pci ops. To make that happen, make sure virtio_ops.setup_queue
return the result if we pass through the check.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
We keep a common vq structure, containing only vq related fields,
and then split others into RX, TX and control queue respectively.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
[Jianfeng Tan: found and fixed 2 bugs]
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The "drv_flags" is set with device as the input, which means different
device (say, modern vs legacy) could end up with a different value. And
the fact that "drv_flags" is shared by all devices means that every time
we add a new device, it simply overwrites the value configured from the
last device.
Therefore, when two virtio devices have different flags, it may lead to
wrong result, such as virtio would set irq config when it's not supported.
Making the flag per device (using "dev->data->dev_flags") could let us
have different value for each device, which would avoid the above issue.
Fixes: da978dfdc43 ("virtio: use port IO to get PCI resource")
Reported-by: David Marchand <david.marchand@6wind.com>
Suggested-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Move all os / arch specifics to eal.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Santosh Shukla <sshukla@mvista.com>
Tested-by: Santosh Shukla <sshukla@mvista.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Modern (v1.0) virtio pci device defines several pci capabilities.
Each cap has a configure structure corresponding to it, and the
cap.bar and cap.offset fields tell us where to find it.
Firstly, we map the pci resources by rte_eal_pci_map_device().
We then could easily locate a cfg structure by:
cfg_addr = dev->mem_resources[cap.bar].addr + cap.offset;
Therefore, the entrance of enabling modern (v1.0) pci device support
is to iterate the pci capability lists, and to locate some configs
we care; and they are:
- common cfg
For generic virtio and virtqueue configuration, such as setting/getting
features, enabling a specific queue, and so on.
- nofity cfg
Combining with `queue_notify_off' from common cfg, we could use it to
notify a specific virt queue.
- device cfg
Where virtio_net_config structure is located.
- isr cfg
Where to read isr (interrupt status).
If any of above cap is not found, we fallback to the legacy virtio
handling.
If succeed, hw->vtpci_ops is assigned to modern_ops, where all
operations are implemented by reading/writing a (or few) specific
configuration space from above 4 cfg structures. And that's basically
how this patch works.
Besides those changes, virtio 1.0 introduces a new status field:
FEATURES_OK, which is set after features negotiation is done.
Last, set the VIRTIO_F_VERSION_1 feature flag.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Reviewed-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Switch to 64 bit features, which virtio 1.0 supports.
While legacy virtio only supports 32 bit features, it complains aloud
and quit when trying to setting > 32 bit features.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Reviewed-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Introduce struct virtio_pci_ops, to let legacy virtio (v0.95) and
modern virtio (1.0) have different implementation regarding to a
specific pci action, such as read host status.
With that, this patch reimplements all exported pci functions, in
a way like:
vtpci_foo_bar(struct virtio_hw *hw)
{
hw->vtpci_ops->foo_bar(hw);
}
So that we need pay attention to those pci related functions only
while adding virtio 1.0 support.
This patch introduced a new vtpci function, vtpci_init(), to do
proper virtio pci settings. It's pretty simple so far: just sets
hw->vtpci_ops to legacy_ops as we don't support 1.0 yet.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Reviewed-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Huawei Xie <huawei.xie@intel.com>
offset arg of vtpci_read/write_dev_config is derived from offsetof(),
which is of size_t type, instead of uint64_t. So, define it as size_t
type.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Reviewed-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Change the features from bit mask to bit number. This allows the
DPDK driver to use the definitions from Linux (yes the header
files already use a license compatiable with DPDK). This makes DPDK
driver handle future feature bit changes.
Get rid of double negative code in the feature bit intialization.
Instead just have a new define with the list of feature bits implemented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Move virtio PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
