These header includes have been flagged by the iwyu_tool
and removed.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
These header includes have been flagged by the iwyu_tool
and removed.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Currently trace_autotest unit test is executed with traces disabled.
This patch introduces trace_autotest unit test with traces enabled,
and the traces file is written to the directory where dpdk-test is
located.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Bug scenario:
1. start testpmd:
$ dpdk-testpmd -l 4-6 -a 0000:7d:00.0 --trace=.* \
--file-prefix=trace_autotest -- -i
2. then observed:
EAL: eal_trace_init():93 failed to initialize trace [File exists]
EAL: FATAL: Cannot init trace
EAL: Cannot init trace
EAL: Error - exiting with code: 1
The root cause it that the offset set wrong with long file-prefix and
then lead the strftime return failed.
At the same time, trace_session_name_generate() uses errno as the return
value, but the errno was not set if strftime returned zero.
A previously set errno (EEXIST or ENOENT from call to mkdir for creating
the runtime configuration directory) was returned in this case.
This is fragile and may lead to incorrect logic if errno was set
to 0 previously.
This also resulted in inaccurate prompting.
Set errno to ENOSPC if strftime return zero.
Fixes: 321dd5f8fa ("trace: add internal init and fini interface")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Bug scenario:
1. start testpmd:
$ dpdk-testpmd -l 4-6 -a 0000:7d:00.0 --trace=.* -- -i
2. quit testpmd and then observed segment fault:
Bye...
Segmentation fault (core dumped)
The root cause is that rte_trace_save() and eal_trace_fini() access
the huge pages which were cleanup by rte_eal_memory_detach().
This patch moves rte_trace_save() and eal_trace_fini() before
rte_eal_memory_detach() to fix the bug.
Fixes: dfbc61a2f9 ("mem: detach memsegs on cleanup")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
HE-HSSI is one of the host exerciser modules in OFS FPGA,
which is used to test HSSI (High Speed Serial Interface).
This driver initialize the module and report test result.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
HE-MEM is one of the host exerciser modules in OFS FPGA,
which is used to test local memory with built-in traffic
generator.
This driver initialize the module and report test result.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
HE-LPBK and HE-MEM-LPBK are host exerciser modules in OFS FPGA,
HE-LPBK is used to test PCI bus and HE-MEM-LPBK is used to test
local memory.
This driver initialize the modules and report test result.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
N3000 AFU includes NLB0 and DMA modules, NLB0 is used to test PCI bus
and DMA is used to test local memory.
This driver initialize the modules and report test result.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
AFU (Acceleration Function Unit) is part of FPGA and enumerated
by ifpga driver.
This driver implements common AFU device interfaces and exposes
them to application as standard raw device APIs.
Normally application can operate specified AFU as below,
1. call rte_rawdev_pmd_get_named_dev() to find AFU device.
2. call rte_rawdev_configure() to initialize AFU device.
3. call rte_rawdev_selftest() to test AFU device.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
N6000 ADP platform support more sensors than N3000, they are
accessed with the help of PMCI sensor driver.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
In N6000 ADP platform, SPI protocol, master and QSPI flash are
transparent to host software. The SPI master implemented in PMCI
automatically converts the mailbox commands to the SPI protocol
required by SPI slave.
That means flash operation is different from old platform, new
interfaces are introduced to adapt these changes.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
N6000 ADP platform has different definition of board information,
they can be recognized after this patch.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
PMCI (Platform Management Control Interface) is a new module in FPGA,
which is designed to cooperate with BMC chip to fulfill board management
functions.
This base driver implements interfaces to access registers of BMC chip.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
The P4 language requires marking a header as valid before any of the
header fields are written as opposed to after the writes are done.
Hence, the optimization of replacing the sequence of instructions to
generate a header by reading it from the table action data with a
single DMA internal instruction are reworked from "mov all + validate
-> dma" to "validate + mov all -> dma".
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Fix comparison used to check against the maximum number of learner
table timeouts.
Fixes: e2ecc53582 ("pipeline: improve learner table timers")
Signed-off-by: Harshad Narayane <harshad.suresh.narayane@intel.com>
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Fix segmentation fault due to null pointer dereferencing inside the
"mirror" instruction when number of mirroring slots is set to 0. This
was taking place when the "mirror" instruction was used without the
mirror feature being properly configured, i.e. the API function
rte_swx_pipeline_mirroring_config was not called at initialization.
Fixes: dac0ecd909 ("pipeline: support packet mirroring")
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Header files should be self contained. This patch fixed it.
Fixes: 9e16317a38 ("dma/hisilicon: add probing")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
DPDK app can support multiple hardware DMA instances.
With DMA skeleton, only a single instance can be configured.
This patch supports multiple driver instances per device.
Signed-off-by: Sivaprasad Tummala <sivaprasad.tummala@amd.com>
Tested-by: Vipin Varghese <vipin.varghese@amd.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Tested-by: Chengwen Feng <fengchengwen@huawei.com>
Some DMA PMD may not update last-idx when no DMA completed, the
previous patch [1] cannot detect this problem actually.
This patch resets last-idx before invoking DMA completed ops to fix it.
[1] test/dma: check index when no DMA completed
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
If no memcopy request is completed, the ring_idx of the last completed
operation need returned by last_idx parameter. This patch fixes it.
Fixes: 05d5fc66a2 ("dma/skeleton: introduce skeleton driver")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
GCC 12 raises the following warning:
../app/test-flow-perf/main.c: In function ‘start_forwarding’:
../app/test-flow-perf/main.c:1737:28: error: ‘sprintf’ may write a
terminating nul past the end of the destination
[-Werror=format-overflow=]
1737 | sprintf(p[i++], "%d", (int)n);
| ^
In function ‘pretty_number’,
inlined from ‘packet_per_second_stats’ at
../app/test-flow-perf/main.c:1792:4,
inlined from ‘start_forwarding’ at
../app/test-flow-perf/main.c:1831:3:
[...]
We can simplify this code and rely on libc integer formatting via
this system locales.
Bugzilla ID: 856
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
GCC 12 raises the following warning:
../drivers/vdpa/ifc/ifcvf_vdpa.c: In function ‘vdpa_enable_vfio_intr’:
../drivers/vdpa/ifc/ifcvf_vdpa.c:383:62: error: writing 4 bytes into a
region of size 0 [-Werror=stringop-overflow=]
383 | fd_ptr[RTE_INTR_VEC_RXTX_OFFSET + i] = fd;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
../drivers/vdpa/ifc/ifcvf_vdpa.c:348:14: note: at offset 32 into
destination object ‘irq_set_buf’ of size 32
348 | char irq_set_buf[MSIX_IRQ_SET_BUF_LEN];
| ^~~~~~~~~~~
Validate number of vrings to avoid out of bound access.
Bugzilla ID: 855
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
GCC 12 raises the following warning:
In file included from ../lib/mempool/rte_mempool.h:46,
from ../lib/mbuf/rte_mbuf.h:38,
from ../lib/net/rte_ether.h:22,
from ../lib/ethdev/rte_ethdev.h:172,
from ../lib/ethdev/ethdev_driver.h:22,
from ../lib/ethdev/ethdev_pci.h:17,
from ../drivers/net/ice/ice_ethdev.c:6:
../drivers/net/ice/ice_ethdev.c: In function ‘ice_dev_configure’:
../lib/eal/x86/include/rte_memcpy.h:370:9: warning: array subscript 64 is
outside array bounds of ‘struct ice_aqc_get_set_rss_keys[1]’
[-Warray-bounds]
370 | rte_mov32((uint8_t *)dst + 2 * 32, (const uint8_t *)src + 2 * 32);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ice/ice_ethdev.c:3202:41: note: while referencing ‘key’
3202 | struct ice_aqc_get_set_rss_keys key;
| ^~~
Restrict copy to minimum size.
Bugzilla ID: 850
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
GCC 12 raises the following warning:
../drivers/net/enetfec/enet_ethdev.c: In function
‘enetfec_rx_queue_setup’:
../drivers/net/enetfec/enet_ethdev.c:473:9: error: array
subscript 1 is
above array bounds of ‘uint32_t[1]’ {aka ‘unsigned int[1]’}
[-Werror=array-bounds]
473 | rte_write32(rte_cpu_to_le_32(fep->bd_addr_p_r[queue_idx]),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
474 | (uint8_t *)fep->hw_baseaddr_v + ENETFEC_RD_START(queue_idx));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../drivers/net/enetfec/enet_ethdev.c:9:
../drivers/net/enetfec/enet_ethdev.h:113:33: note: while referencing
‘bd_addr_p_r’
113 | uint32_t bd_addr_p_r[ENETFEC_MAX_Q];
| ^~~~~~~~~~~
This driver properly announces that it only supports 1 rxq.
Silence this warning by adding an explicit check on the queue id.
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
GCC 12 raises the following warning:
In file included from ../lib/mempool/rte_mempool.h:46,
from ../lib/mbuf/rte_mbuf.h:38,
from ../lib/net/rte_ether.h:22,
from ../drivers/net/ena/ena_ethdev.h:10,
from ../drivers/net/ena/ena_rss.c:6:
../drivers/net/ena/ena_rss.c: In function ‘ena_rss_key_fill’:
../lib/eal/x86/include/rte_memcpy.h:370:9: warning: array subscript 64 is
outside array bounds of ‘uint8_t[40]’
{aka ‘unsigned char[40]’} [-Warray-bounds]
370 | rte_mov32((uint8_t *)dst + 2 * 32, (const uint8_t *)src + 2 * 32);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ena/ena_rss.c:51:24: note: while referencing ‘default_key’
51 | static uint8_t default_key[ENA_HASH_KEY_SIZE];
| ^~~~~~~~~~~
This is a false positive because the copied size is checked against
ENA_HASH_KEY_SIZE in a (build) assert.
Silence this warning by calling memcpy with the minimal size.
Bugzilla ID: 849
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
GCC 12 raises the following warning:
In function ‘__rte_ring_enqueue_elems_64’,
inlined from ‘__rte_ring_enqueue_elems’ at
../lib/ring/rte_ring_elem_pvt.h:130:3,
inlined from ‘__rte_ring_do_hts_enqueue_elem’ at
../lib/ring/rte_ring_hts_elem_pvt.h:196:3,
inlined from ‘rte_ring_mp_hts_enqueue_burst_elem’ at
../lib/ring/rte_ring_hts.h:110:9,
inlined from ‘rte_ring_enqueue_burst_elem’ at
../lib/ring/rte_ring_elem.h:577:10,
inlined from ‘rte_ring_enqueue_burst’ at
../lib/ring/rte_ring.h:738:9,
inlined from ‘process_op_bit’ at
../drivers/crypto/ipsec_mb/pmd_snow3g.c:425:16,
inlined from ‘snow3g_pmd_dequeue_burst’ at
../drivers/crypto/ipsec_mb/pmd_snow3g.c:484:20:
../lib/ring/rte_ring_elem_pvt.h:68:44: error: array subscript 1 is
outside array bounds of ‘struct rte_crypto_op[0]’
[-Werror=array-bounds]
68 | ring[idx + 1] = obj[i + 1];
| ~~~^~~~~~~
../drivers/crypto/ipsec_mb/pmd_snow3g.c: In function
‘snow3g_pmd_dequeue_burst’:
../drivers/crypto/ipsec_mb/pmd_snow3g.c:434:1: note:
at offset 8 into object ‘op’ of size 8
434 | snow3g_pmd_dequeue_burst(void *queue_pair,
| ^~~~~~~~~~~~~~~~~~~~~~~~
Validate that one (exactly) op has been processed or return early.
Fixes: b537abdbee ("crypto/snow3g: support bit-level operations")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The current packages installed for RISC-V build check do not contain a
C++ compiler, which hid an issue with C++ type conversion in the
rte_vect.h header on RISC-V or in the scalar implementation of the LPM
x4 lookup. Now that this issue is fixed, use the full toolchain install
to enable the C++ test.
Besides, the user's guide for RISC-V cross-compilation recommends the
use of crossbuild-essential-riscv64.
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
rte_xmm_t is a union type which wraps around xmm_t and maps its contents
to scalar structures. Since C++ has stricter type conversion rules than
C, the rte_xmm_t::x has to be used instead of C-casting.
The generated assembly is identical to the code without the fix (checked
both on x86 and RISC-V).
Fixes: 406937f89f ("lpm: add scalar version of lookupx4")
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
rte_xmm_t is a union type which wraps around xmm_t and maps its contents
to scalar structures. Since C++ has stricter type conversion rules than
C, the rte_xmm_t::x has to be used instead of C-casting.
Fixes: f22e705ebf ("eal/riscv: support RISC-V architecture")
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Rather than explicitly clearing any setting of undefined values in our
rte_config.h file, it's better to instead just add a comment that the
value is not set. Using a comment allows the user to set the value using
CFLAGS or similar mechanism without the config file clearing the value
again.
The text used "<VALUE> is not set" is modelled after the kernel approach
of doing the same thing.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
By default, ccache is not used for cross build[1].
Update all cross files to use ccache if it is available
in build machine.
Also, updated devtools/test-meson-builds.sh
script to find the correct DPDK_TARGET due to
change in cross file syntax.
[1]
https://mesonbuild.com/Machine-files.html
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
When passing in test names to run via either the DPDK_TEST environment
variable or via extra argv parameters, the checks run on those commands
can miss valid commands that are registered with the cmdline library in
the initial context used to set it up. This is seen in the fact that the
"dump_*" set of commands are not callable via argv parameters, but can
be called manually.
To fix this, just use the commandline library to validate each command
before executing it, stopping execution when an error is encountered.
This also has the benefit of not having the test binary drop to
interactive mode if all commandline parameters given are invalid.
Bugzilla ID: 1002
Fixes: 9b848774a5 ("test: use env variable to run tests")
Fixes: ace2f054ed ("test: take test names from command line")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The cmdline library cmdline_parse() function parses a command and
executes the action automatically too. The cmdline_valid_buffer function
also uses this function to validate commands, meaning that there is no
function to validate a command as ok without executing it.
To fix this omission, we extract the body of cmdline_parse into a new
static inline function with an extra parameter to indicate whether the
action should be performed or not. Then we create two wrappers around
that - a replacement for the existing cmdline_parse function where the
extra parameter is "true" to execute the command, and a new function
"cmdline_parse_check" which passes the parameter as "false" to perform
cmdline validation only.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Weiyuan Li <weiyuanx.li@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Reduce the number of Arm builds from 3 to 1:
only generic armv8 with GCC.
The specific PPC builds on Ubuntu are skipped.
The build directories for PPC and RISC-V
are also renamed for consistency:
- build-arm64-generic-gcc
- build-ppc64-power8-gcc
- build-riscv64-generic-gcc
The cross file is always saved in variable "f" for readability.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
