Meter arrays are stateful objects that are updated by the data plane
and configured & monitored by the control plane. The meters implement
the RFC 2698 Two Rate Three Color Marker (trTCM) algorithm.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Register arrays are stateful objects that can be read & modified by
both the data plane and the control plane, as opposed to tables, which
are read-only for data plane. One key use-case is the implementation
of stats counters.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch allows specification of integer arguments for the
CLI commands in hexadecimal and octal as well as decimal.
Signed-off-by: Churchill Khangar <churchill.khangar@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
A global ethernet port configuration is assigned to local variable
because in this way the local variable may be updated as required. But
this local variable is not used as input of rte_eth_dev_configure() in
original implementation, and cause that fast mbuf free feature cannot
be enabled on port.
This patch use this local variable as input of rte_eth_dev_configure().
Fixes: 6833f919f5 ("examples/packet_ordering: convert to new ethdev offloads API")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Add the file descriptor input/output port type for the SWX pipeline.
File descriptor port type provides interface with the kernel network
stack. Example file descriptor port is TAP device.
Signed-off-by: Venkata Suresh Kumar P <venkata.suresh.kumar.p@intel.com>
Signed-off-by: Churchill Khangar <churchill.khangar@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the widlcard match/ACL table type for the SWX pipeline, which is
used under the hood by the table instruction.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Churchill Khangar <churchill.khangar@intel.com>
Improve the table entry parsing: better code structure, enable parsing
for the key field masks, allow comments and empty lines in the table
entry files.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Venkata Suresh Kumar P <venkata.suresh.kumar.p@intel.com>
Signed-off-by: Churchill Khangar <churchill.khangar@intel.com>
Instead of using getopt_long return value, strcmp was used to
compare the input parameters with the struct option array. This
patch get rid of all those strcmp by directly binding each longopt
with an int enum. This is to improve readability and consistency in
all examples.
Bugzilla ID: 238
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Instead of using getopt_long return value, strcmp was used to
compare the input parameters with the struct option array. This
patch get rid of all those strcmp by directly binding each longopt
with an int enum. This is to improve readability and consistency in
all examples.
Bugzilla ID: 238
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Instead of using getopt_long return value, strcmp was used to
compare the input parameters with the struct option array. This
patch get rid of all those strcmp by directly binding each longopt
with an int enum. This is to improve readability and consistency in
all examples.
Bugzilla ID: 238
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Instead of using getopt_long return value, strcmp was used to
compare the input parameters with the struct option array. This
patch get rid of all those strcmp by directly binding each longopt
with an int enum. This is to improve readability and consistency in
all examples.
Bugzilla ID: 238
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Instead of using getopt_long return value, strcmp was used to
compare the input parameters with the struct option array. This
patch get rid of all those strcmp by directly binding each longopt
with an int enum. This is to improve readability and consistency in
all examples.
Bugzilla ID: 238
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Instead of using getopt_long return value, strcmp was used to
compare the input parameters with the struct option array. This
patch get rid of all those strcmp by directly binding each longopt
with an int enum. This is to improve readability and consistency in
all examples.
Bugzilla ID: 238
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Instead of using getopt_long return value, strcmp was used to
compare the input parameters with the struct option array. This
patch get rid of all those strcmp by directly binding each longopt
with an int enum. This is to improve readability and consistency in
all examples.
Bugzilla ID: 238
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The header file unistd.h should not be included from sys/ directory,
it is an error with musl libc.
Fixes: 1ffee690ea ("examples/bbdev: add sample app")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
The library execinfo and its header file can be installed on Alpine Linux
where the backtrace feature is not part of musl libc:
apk add libexecinfo-dev
As a consequence, this library should not be restricted to BSD only.
At the same time, the library and header are detected once and added
globally to be linked with any application, internal or external.
Fixes: 9065b1fac6 ("build: fix dependency on execinfo for BSD meson builds")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
This patch add support to enable Rx offload for timestamp.
It is required to be enabled for some PMDs e.g. dpaa2.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
The meson.build files in each example directory is simply to support
building the example as part of the main SDK build, and these should not
be installed with the example's source code and makefile. The exclude of
"meson.build" only filters out the top-level examples/meson.build file,
not the file in each subdirectory.
To fix this, we can build up the list of files to exclude based off the
list of all examples. With this change "find examples/ -name meson.build"
returns no hits when run on an installed instance.
Fixes: e5b95003f1 ("examples: fix flattening directory layout on install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds add error propagation for rte_ioat_completed_ops call,
and also changes dev_id type from int to uint16_t.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Change the type of buff_idx from uint64_t to uint32_t to fix coverity
issue.
Coverity issue: 366264
Fixes: a68ba8e0a6 ("examples/vhost: refactor vhost data path")
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Remove async inflight packet counter since there is no need to keep
tracking it. Increase MAX_ENQUEUED_SIZE to prevent packet segment number
tracking ring from being exhausted.
Fixes: a68ba8e0a6 ("examples/vhost: refactor vhost data path")
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Since the examples are designed to be built by end-users using Make, we
can detect and warn about broken pkg-config on the user's system as part
of the build process.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Change the vm2vm data path to batch enqueue for better performance.
Support latest async vhost API, refactor vhost async data path,
replace rte_atomicNN_xxx to __atomic_XXX and clean some codes.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add ioat ring space count and check, if ioat ring space is not enough
for the next async vhost packet enqueue, then just return to prevent
enqueue failure. Add rte_ioat_completed_ops() fail handler.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Move eth stop code from "signal_handler" function to the end of "main"
function. There are two reasons for this:
First, this improves code maintenance and makes code look simple and
clear. Based on this change, after receiving the interrupt signal,
"fdata->done" is set as 1. Then the main thread will wait all worker
lcores to jump out of the loop. Finally, the main thread will stop and
then close eth dev port.
Second, for older version, the main thread first stops eth dev port and
then waits the end of worker lcore. This may cause errors because it may
stop the eth dev port which worker lcores are using. This moving change
can fix this by waiting all worker threads to exit and then stop the
eth dev port.
In the meanwhile, remove wmb in signal_handler.
This is because when the main lcore receive the stop signal, it stores 1
into fdata->done. And then the worker lcores load "fdata->done" and jump
out of the loop to stop running. Nothing should be stored after updating
fdata->done, so the wmb is unnecessary.
Fixes: 085edac2ca ("examples/eventdev_pipeline: support Tx adapter")
Cc: stable@dpdk.org
Suggested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
When the main core is set as tx/rx/sched/worker core, it also needs to
print some information to show this. Thus, add info output for the main
core, and add a "dump" function to print core information for the sake
of code simplicity and easy maintenance.
In the meanwhile, fix the count error. For the variable "worker_idx", it
should be incremented when the core is set as worker core. However, when
the main core is set as rx/tx/sched core, the worker_idx is also
incremented. Though this error may not have a substantial impact due to
that the main core is the last launched core, but it should be corrected
from the perspective of code correctness.
Fixes: 1094ca9668 ("doc: add SW eventdev pipeline to sample app guide")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
In the case that the cores are isolated, if "-l" or "-c" parameter is not
added, the cores will not be enabled and can not launch worker function
correctly. In the meanwhile, no error information is reported.
For example:
totally CPUs:16
isolated CPUs:1-8
command: sudo gdb -args ./dpdk-eventdev_pipeline --vdev event_sw0 \
-- -r1 -t1 -e4 -w F00 -s4 -n0 -c32 -W1000 -D
cores information:
rte_config->lcore_role = {ROLE_RTE, ROLE_OFF, ROLE_OFF, ROLE_OFF,
ROLE_OFF, ROLE_OFF, ROLE_OFF, ROLE_OFF,
ROLE_OFF, ROLE_RTE, ROLE_RTE, ROLE_RTE,
ROLE_RTE, ROLE_RTE, ROLE_RTE, ROLE_RTE}
output information:
...
[main()] lcore 9 executing worker, using eventdev port 0
[main()] lcore 10 executing worker, using eventdev port 1
[main()] lcore 11 executing worker, using eventdev port 2
This is because "RTE_LCORE_FOREACH_WORKER" chooses the enabled core. In
the case that the cores are isolated, "the lcore_role" flag of isolated
cores are set as "ROLE_OFF" by default(not enabled). So if we choose
these isolated cores as workers, "RTE_LCORE_FOREACH_WORKER" will ignore
these cores and not launch worker functions on them.
To fix this, add "-l" parameters to doc and add lcore enabled check.
Fixes: 1094ca9668 ("doc: add SW eventdev pipeline to sample app guide")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Add PMD power management feature support to l3fwd-power sample app.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
re-organise the including of the new public header file and
remove un-needed includes
Fixes: 210c383e24 ("power: packet format for vm power management")
Fixes: cd0d5547e8 ("power: vm communication channels in guest")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Rename the #defines to have an RTE_POWER_ prefix
Fixes: 210c383e24 ("power: packet format for vm power management")
Fixes: cd0d5547e8 ("power: vm communication channels in guest")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Rename the public structs to have an rte_power_ prefix.
Fixes: 210c383e24 ("power: packet format for vm power management")
Fixes: cd0d5547e8 ("power: vm communication channels in guest")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
In preparation for making the header file public, we first rename
channel_commands.h as rte_power_guest_channel.h.
Fixes: 210c383e24 ("power: packet format for vm power management")
Fixes: cd0d5547e8 ("power: vm communication channels in guest")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
When vm_power_manager is started, it takes over power management on
all cores. This should be limited to cores defined in the core mask.
When initialising, if a core is not on the coremask, skip it.
Applies to both initialisation and exit.
Signed-off-by: David Hunt <david.hunt@intel.com>
Meson can use cmake as a fallback for detecting packages, and this can
lead to picking up 64-libs for 32-bit builds. To work around this, force
the use of pkg-config only for detecting libcrypto, zlib, jansson and
other package dependencies.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Liron Himi <lironh@marvell.com>
Tested-by: Lee Daly <lee.daly@intel.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Martin Spinler <spinler@cesnet.cz>
This python script provides a shebang that only makes sense if the
script has the executable bit set.
Fixes: fde7a77270 ("examples/pipeline: add VXLAN encapsulation example")
Cc: stable@dpdk.org
Reported-by: Timothy Redaelli <tredaelli@redhat.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
In l3fwd no of transmit queues is calculated based on no of
lcores with which it is launched. Hence maximum no of tx
queues possible per port should depend on RTE_MAX_LCORE value.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Async enqueue offloads large copies to DMA devices, and small copies
are still performed by the CPU. However, it requires users to get
enqueue completed packets by rte_vhost_poll_enqueue_completed(), even
if they are completed by the CPU when rte_vhost_submit_enqueue_burst()
returns. This design incurs extra overheads of tracking completed
pktmbufs and function calls, thus degrading performance on small packets.
This patch enhances async enqueue for small packets by enabling
rte_vhost_submit_enqueue_burst() to return completed packets.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The --export-dynamic linker option is only applicable to ELF.
On Windows, where COFF is used, it causes warnings:
x86_64-w64-mingw32-ld: warning: --export-dynamic is not supported
for PE+ targets, did you mean --export-all-symbols? (MinGW)
LINK : warning LNK4044: unrecognized option '/-export-dynamic';
ignored (clang)
Don't add --export-dynamic on Windows anywhere.
Fixes: b031e13d7f ("build: fix plugin load on static build")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Simply replace the rte_smp_mb barriers with SEQ_CST atomic thread fence,
if there is no load/store operations.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Use C11 atomic APIs with one-way barriers to replace two-way
barriers when operating enqueue/dequeue. Used->idx and avail->idx
are the synchronization points for split vring.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When dpdk is compiled as static libraries, it is not possible
to load a plugin from an application. We get the following error:
EAL: librte_pmd_xxxx.so: undefined symbol: per_lcore__rte_errno
This happens because the dpdk symbols are not exported. Add them to the
dynamic symbol table by using '-Wl,--export-dynamic'. This option was
previously present when compiled with Makefiles, it was introduced in
commit f9a08f6502 ("eal: add support for shared object drivers")
Also add it to the pkg-config file.
Fixes: 16ade738fd ("app/testpmd: build with meson")
Fixes: 89f0711f9d ("examples: build some samples with meson")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
l3fwd-power uses `--parse-ptype' parameter to query egress packets
type. Before that feature is enabled l3fwd-power verifies PMD ability
to advertise supported packet types with
rte_eth_dev_get_supported_ptypes().
The above ethdev function API contains this note:
"
Better to invoke this API after the device is already started or rx burst
function is decided, to obtain correct supported ptypes.
"
The patch updates code for PMDs that register supported types after
dev_start.
Fixes: 82bea46616 ("examples/l3fwd-power: add --parse-ptype option")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
The makefiles for some of the multi_process example files were missing
SPDX license headers, so add them. These Makefiles completely replaced
the older makefiles and were written from scratch, not based on previous
versions, so add a new copyright year on them.
Fixes: 13abe17c3c ("examples/multi_process: convert to pkg-config-based build")
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Replace -w / --pci-whitelist with -a / --allow options
and --pci-blacklist with --block.
The -b short option remains unchanged.
Allow the old options for now, but print a nag
warning since old options are deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Before make removal, those examples were built with experimental flag
for tracepoints to be compiled in but the pkg-config part of those
makefiles were missed.
Fixes: 78d44153de ("ethdev: add tracepoints")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This example is missing the experimental flag since it uses an
experimental API.
Fixes: cd1dadeb9b ("examples/rxtx_callbacks: support HW timestamp")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
