Add new rte_flow_item_gre_key in order to match the optional key field.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add actions:
- INC_TCP_SEQ - Increase sequence number in the outermost TCP header.
- DEC_TCP_SEQ - Decrease sequence number in the outermost TCP header.
- INC_TCP_ACK - Increase acknowledgment number in the outermost TCP
header.
- DEC_TCP_ACK - Decrease acknowledgment number in the outermost TCP
header.
Original work by Xiaoyu Min.
This patch uses the new approach introduced by [1], using a simple
integer instead of using an action-specific structure for each of
the new actions.
[1] http://patches.dpdk.org/patch/55882/
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
We had some inconsistencies between functions prototypes and actual
definitions.
Let's avoid this by only adding the experimental tag to the prototypes.
Tests with gcc and clang show it is enough.
git grep -l __rte_experimental |grep \.c$ |while read file; do
sed -i -e '/^__rte_experimental$/d' $file;
sed -i -e 's/ *__rte_experimental//' $file;
sed -i -e 's/__rte_experimental *//' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Currenlty the encap/decap actions only support encapsulation
of VXLAN and NVGRE L2 packets (L2 encapsulation is where
the inner packet has a valid Ethernet header, while L3 encapsulation
is where the inner packet doesn't have the Ethernet header).
In addtion the parameter to to the encap action is a list of rte items,
this results in 2 extra translation, between the application to the
actioni and from the action to the NIC. This results in negative impact
on the insertion performance.
Looking forward there are going to be a need to support many more tunnel
encapsulations. For example MPLSoGRE, MPLSoUDP.
Adding the new encapsulation will result in duplication of code.
For example the code for handling NVGRE and VXLAN are exactly the same,
and each new tunnel will have the same exact structure.
This patch introduce a raw encapsulation that can support L2 tunnel types
and L3 tunnel types. In addtion the new
encapsulations commands are using raw buffer inorder to save the
converstion time, both for the application and the PMD.
In order to encapsulate L3 tunnel type there is a need to use both
actions in the same rule: The decap to remove the L2 of the original
packet, and then encap command to encapsulate the packet with the
tunnel.
For decap L3 there is also a need to use both commands in the same flow
first the decap command to remove the outer tunnel header and then encap
to add the L2 header.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
As described in [1], a new rte_flow item is added to support metadata
to use as flow rule match pattern.
The metadata is an opaque item, fully controlled by the application.
The use of metadata is relevant for egress rules only.
It can be set in the flow rule using the RTE_FLOW_ITEM_META.
An additional member 'tx_metadata' is added in union with existing member
'hash' of struct 'rte_mbuf', located to avoid conflicts with existing
fields. This additional member is used to carry the metadata item.
Application should set the packet metadata in the mbuf dedicated field,
and set the PKT_TX_METADATA flag in the mbuf->ol_flags.
The NIC will use the packet metadata as match criteria for relevant
flow rules.
This patch introduces metadata item type for rte_flow RTE_FLOW_ITEM_META,
along with corresponding struct rte_flow_item_meta and ol_flag
PKT_TX_METADATA.
[1] "[RFC,v2] ethdev: support metadata as flow rule criteria"
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_flow actions:
- RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
- RTE_FLOW_ACTION_TYPE_SET_MAC_DST
added in order to offload to NIC
The rte_flow_itme_eth must be present in rte_flow pattern
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
rewrite TTL by decrease or just set it directly
it's not necessary to check if the final result
is zero or not
This is slightly different from the one defined
by openflow and more generic
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This action is useful for offloading loopback mode, where the hardware
will swap source and destination MAC addresses in the outermost Ethernet
header before looping back the packet. This action can be used in
conjunction with other rewrite actions to achieve MAC layer transparent
NAT where the MAC addresses are swapped before either the source or
destination MAC address is rewritten and NAT is performed.
Must be used with a valid RTE_FLOW_ITEM_TYPE_ETH flow pattern item.
Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error should be returned by the
PMDs.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add actions:
- SET_TP_SRC - set a new TCP/UDP source port number.
- SET_TP_DST - set a new TCP/UDP destination port number.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add actions:
- SET_IPV4_SRC - set a new IPv4 source address.
- SET_IPV4_DST - set a new IPv4 destination address.
- SET_IPV6_SRC - set a new IPv6 source address.
- SET_IPV6_DST - set a new IPv6 destination address.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Several pattern items and actions were never handled by rte_flow_copy()
because their descriptions were missing. rte_flow_conv() inherited this
deficiency.
This patch adds them and reorders others to match rte_flow.h. It doesn't
pose as a fix because so far no one has complained about it and
rte_flow_conv() would have to be backported as well: this function is
the only sane approach to handle VXLAN and NVGRE encap definitions.
As a matter of fact, it's the last missing piece to finally allow
testpmd users to request the creation of VXLAN/NVGRE encap/decap flow
rules without getting rejected outright.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This provides a means for applications to retrieve the name of flow
pattern items and actions.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
rte_flow_copy() is bound to duplicate flow rule descriptions
(attributes, pattern and list of actions, all at once), however
applications sometimes need more flexibility, for instance the ability
to duplicate only one of the underlying objects (a single pattern item
or action) or retrieve other properties such as their names.
Instead of adding dedicated functions to handle each possible use case,
this patch introduces rte_flow_conv(), which supports any number of
object conversion operations in an extensible manner.
This patch re-implements rte_flow_copy() as a wrapper to
rte_flow_conv().
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Add rte_flow_expand_rss in map file and tag it as experimental.
Fixes: 4ed05fcd441b ("ethdev: add flow API to expand RSS flows")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Node RSS types are generally covering more RSS kind than the user is
requesting, it should accept to expand even if only a single bit is
remains after masking. Setting the correct RSS kind for the rule
remains the driver job.
Fixes: 4ed05fcd441b ("ethdev: add flow API to expand RSS flows")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Introduce an helper for PMD to expand easily flows items list with RSS
action into multiple flow items lists with priority information.
For instance a user items list being "eth / end" with rss action types
"ipv4-udp ipv6-udp end" needs to be expanded into three items lists:
- eth
- eth / ipv4 / udp
- eth / ipv6 / udp
to match the user request. Some drivers are unable to reach such
request without this expansion, this API is there to help those.
Only PMD should use such API for their internal cooking, the application
will still handle a single flow.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
COUNT action has been modified and has several fields not addressable
though testpmd. In addition, as those fields are not definable testpmd
is providing an empty configuration which is undefined.
Fixes: fb8fd96d4251 ("ethdev: add shared counter to flow API")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Like original commit mentioned below, this fix synchronizes flow rule copy
function with testpmd's own implementation following "app/testpmd: fix copy
of raw flow item (revisited)".
It addresses a crash that occurs when feeding a RAW pattern item to
rte_flow_copy(). Besides external applications, two PMDs (bonding and
failsafe) rely on this function internally.
Note the scope of this patch is limited to the RAW pattern item and has no
impact on all others.
Fixes: 972bf3610611 ("ethdev: fix shallow copy of flow API RSS action")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Library folder name and output library name are same except a few flaws
including librte_ether.
This library is network device abstraction layer, the name "ethdev" fits
better than "ether", and library & header files already named as ethdev.
Also there is a rte_ether.h in the net library which can cause confusion.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
