Bare metal support has been gone for quite some time but we still had
some checks on system includes.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add 128-bit atomic compare and swap test for aarch64 and x86_64.
Extend the test iteration from 10 thousand to 1 million times to test
the stability of the atomic APIs.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
This is a commonly used operation that surprisingly the
DPDK has not supported. The new rte_pktmbuf_copy does a
deep copy of packet. This is a complete copy including
meta-data.
It handles the case where the source mbuf comes from a pool
with larger data area than the destination pool. The routine
also has options for skipping data, or truncating at a fixed
length.
This patch also introduces internal inline to copy the
metadata fields of mbuf.
Add a test for this new function, based of the clone tests.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The test for cloning changed mbuf would generate an mbuf whose length
and segments count were invalid.
This would cause a crash if test was run with mbuf debugging enabled.
Fixes: 4ccd2bb3a9e2 ("app/test: enhance mbuf refcnt check")
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add options to set mbuf size and max packet size which allow the user to
enable jumbo frames and Rx/Tx scatter gather.
Arrange `struct evt_options` based on ascending order of data type to
make it more readable.
Packet mbuf size can be modified by using `--mbuf_sz=N`.
Max packet size can be modified by using `--max_pkt_sz=N`.
These options are only applicable `pipeline_atq` and `pipeline_queue`
tests.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The existing code uses NULL as the cipher algo
for testing crypto event adapter.
DPAA1/DPAA2 do not support NULL algo. Hence changing
it to the most common algo AES-CBC, which is supported
by all crypto drivers implementing event crypto adapter.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
The longer mempool name size is causing error in
rte_mempool_create_empty for dpaa1
ret = snprintf(mz_name, sizeof(mz_name), RTE_MEMPOOL_MZ_FORMAT, name);
This patch reduce the size of mempool name string
Fixes: 24054e3640a2 ("test/crypto: use separate session mempools")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
If HW support is available, service core shall not come
into play by default. This shall be for both FWD/NEW modes.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Mismatch in algo or sec capability can cause session to fail.
This patch handle it and return error timely.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
This structure has been missed during the big rework.
Fixes: 5ef254676752 ("net: add rte prefix to ESP structure")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds command line support for Symmetric Toeplitz
hash configuration.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
This minor patch fixes unused variable ‘ret’ compile error When
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC was selected.
Fixes: 6f51deb903b2 ("app/testpmd: check status of getting ethdev info")
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
port reset cause crash when ports are not stopped. Fixed by refusing the
reset when port is not stopped.
Fixes: 97f1e196799f ("app/testpmd: add port reset command")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across app/test-pmd
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a wrapper for rte_eth_macaddr_get() that prints an
error and returns a status code if the function fails.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_link_get_nowait() was changed from void to int.
Update the usage of the function according to the new return type.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a wrapper for rte_eth_eth_link_get_nowait() that prints an
error and returns a status code if the function fails.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change rte_eth_xstats_reset() return value from void to int and
return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across apps according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across app/testpmd
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so modify usage of these
functions across lib/librte_kni according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_dev_info_get() return value was changed from void to int, so
this patch modify rte_eth_dev_info_get() usage across apps
according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add eth_dev_info_get_print_err() which is a wrapper for
rte_eth_dev_info_get() printing error if rte_eth_dev_info_get()
fails and returning its status code.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_eth_dev_info_get() always fills in device information memory
with zeros on entry.
Fixes: b6719879855d ("ethdev: avoid getting uninitialized info for bad port")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Now that the necessary function is exported from the fpga_lte_fec driver,
we can enable the code paths using it in shared-library builds.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
The fpga_lte_fec is the only bbdev driver that does not use bbdev in the
name, so modify it to keep consistency with the other bbdev drivers. This
will then allow later simplification due to all drivers using the same
basic naming format.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds 256-bit AES GCM tests for QAT PMD
(which already existed for AESNI and OpenSSL) and also adds
a number of negative unit tests for AES GCM for QAT PMD, in order
to verify authenticated encryption and decryption with modified data.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Segmented frames not supported for out-of-place case.
This patch returns err if such config is requested.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Negative cases with wrong cipher/auth text added
to dpaa_sec and dpaa2_sec PMD test suites.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In some of the cases, the test is looking for a specific
failure returned from the CryptoDev. Not all cryptodev
support returning specific errors.
This patch changes such checks to NOT-SUCCESS
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
SNOW and ZUC plain crypto operations for cipher only
and auth only are now supported in dpaa2_sec.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Test cases for PDCP with scattered input and output
buffers are added for both inplace and out of place scenarios.
1. input SG - output non SG
2. input and output both SG and inplace buffers
3. input and output both SG with different segment sizes
4. input SG and output non-SG
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch add test cases for user plane PDCP
5/7/12/15/18 bit SN test cases for decapsulation of
cipher only and 12/18 bit for cipher + integrity
for all algo combinations.
Test vectors are reused from the encap cases
by swapping the input and output data.
The case are added to DPAA_SEC and DPAA2_SEC
testsuite.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
PDCP User/Data plane can optionally support integrity
along with confidentiality.
This patch add test cases and test vectors for all
supported algos combos for cipher+integrity for 12
and 18bit SN.
The test cases are added in DPAA_SEC and DPAA2_SEC
test suite as a reference.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
PDCP User/Data plane can support 5/7/12/15/18 bit
sequence number. This patch add test cases and test
vectors for all supported algos for cipher only.
(NULL, AES, SNOW, ZUC ciphers)
The test cases are added in DPAA_SEC and DPAA2_SEC
test suite as a reference.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch add test cases for control plane PDCP
5 and 12 bit SN test cases for decapsulation of
cipher+integrity for all algo combinations
Test vectors are reused from the encap cases
by swapping the input and output data.
The case are added to DPAA_SEC and DPAA2_SEC testsuite.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
PDCP control plane can support 5 bit and 12 bit
sequence number. This patch add test cases and test
vectors for all supported algo combinations of cipher+integrity
(NULL+NULL, NULL+AES, NULL+SNOW, NULL+ZUC,
AES+NULL, AES+SNOW, AES+AES, AES+ZUC,
SNOW+NULL, SNOW+AES, SNOW+SNOW, SNOW+ZUC,
ZUC+NULL, ZUC+AES, ZUC+SNOW, ZUC+ZUC).
The test cases are added in DPAA_SEC and DPAA2_SEC
test suite as a reference.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch adds new performance measurement option --external-mbufs
that allocates and uses memzones as external buffers instead of
putting the data directly inside mbufs.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Adds a new test to verify external buffer in mbuf APIs.
Initialize fields in test_data_params structures by name
for better readability.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds two new tests that cover the stateful
decompression feature.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
