The meson build was missing the define to enable pcap port support if
libpcap (development) package was found on the build platform. Rather than
duplicating the checks for libpcap found in the pcap net PMD build file, we
can move the checks to the top-level config directory and reference the
RTE_PCAP_PORT setting elsewhere in the build.
Bugzilla ID: 351
Fixes: 5b9656b157 ("lib: build with meson")
Cc: stable@dpdk.org
Reported-by: Cristian Bidea <cristian.bidea@keysight.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Cristian Bidea <cristian.bidea@keysight.com>
Adding a new port type called eventdev to the
rte_port library.
Signed-off-by: Rahul Shah <rahul.r.shah@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the symmetric crypto support to port library.
The crypto port acts as a shim layer to DPDK cryptodev library and
supports in-place crypto workload processing.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Unless a library cannot be built for a specific platform (generally
BSD), it will always be available. Therefore remove checks for IP
fragmentation and ACL libraries, since these are built for all
platforms.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add non-EAL libraries to DPDK build. The compat lib is a special case,
along with the previously-added EAL, but all other libs can be build using
the same set of commands, where the individual meson.build files only need
to specify their dependencies, source files, header files and ABI versions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The code should return the actual number of packets read.
Fixes: 5a99f208 ("port: support file descriptor")
Signed-off-by: Andriy Berestovskyy <andriy.berestovskyy@caviumnetworks.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Makes code a bit cleaner and type-aware.
Signed-off-by: Andriy Berestovskyy <andriy.berestovskyy@caviumnetworks.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add an extra parameter to the ring dequeue burst/bulk functions so that
those functions can optionally return the amount of remaining objs in the
ring. This information can be used by applications in a number of ways,
for instance, with single-consumer queues, it provides a max
dequeue size which is guaranteed to work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add an extra parameter to the ring enqueue burst/bulk functions so that
those functions can optionally return the amount of free space in the
ring. This information can be used by applications in a number of ways,
for instance, with single-producer queues, it provides a max
enqueue size which is guaranteed to work. It can also be used to
implement watermark functionality in apps, replacing the older
functionality with a more flexible version, which enables apps to
implement multiple watermark thresholds, rather than just one.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
create a common structure to hold the metadata for the producer and
the consumer, since both need essentially the same information - the
head and tail values, the ring size and mask.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds File Descriptor(FD) port type (e.g. TAP port) to the
packet framework library that allows interface with the kernel network
stack. The FD port APIs are defined that allow port creation, writing
and reading packet from the kernel interface.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The ``file_name`` data type of ``struct rte_port_source_params`` and
``struct rte_port_sink_params`` is changed from `char *`` to ``const char *``.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Commit 9fc37d1c07 is missing a conditional in the dependencies,
causing builds to fail when KNI is not enabled:
== Build lib/librte_port
LD librte_port.so.3
/usr/bin/ld: cannot find -lrte_kni
collect2: error: ld returned 1 exit status
Fixes: 9fc37d1c07 ("port: support KNI")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
add KNI port type to the packet framework
Signed-off-by: WeiJie Zhuang <zhuangwj@gmail.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds missing DEPDIRS to avoid any library referring to
symbols they are not linked against.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Support of PCAP file has been added to rte_port in release 16.04
as NEXT_ABI. It is in the standard ABI of the release 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Fixes the buffer overflow that occurs due to following;
1. When the input packet burst does not meet the conditions: (a) being
contiguous (first n bits set in pkts_mask, all the other bits cleared)
and (b) containing a full burst, i.e. at least tx_burst_sz packets
(n >= tx_burst_size). This is the slow(er) code path taken when local
variable expr != 0.
2. There are some packets already in the buffer.
3. The number of packets in the incoming burst (i.e. popcount(pkts_mask))
plus the number of packets already in the buffer exceeds the buffer size
(RTE_PORT_IN_BURST_SIZE_MAX, i.e. 64).
Fixes: bf6931b242 ("port: ring")
Fixes: 5f4cd47309 ("port: add ring writer nodrop")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch clean-up the code in librte_port.
The clean-up includes the following:
* Clearer error message display.
* Remove unnecessary RTE_NEXT_ABI macro warping.
* Remove __rte_unused attribute
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes sink port parameter checking logic.
Originally, if user set field "file_name" with meaning value
but leave PCAP support feature disabled, the program simply
ignores this field without notifying the user.
Fixes: eb5f4119b2 ("port: add pcap file dump")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes source port parameter checking logic.
Originally, if user set field "file_name" with meaning value
but leave PCAP support feature disabled, the program simply
ignores this field without notifying the user.
Fixes: d4b42133d8 ("port: add pcap file source")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Originally, sink ports in librte_port releases received mbufs back to
mempool. This patch adds optional packet dumping to PCAP feature in sink
port: the packets will be dumped to user defined PCAP file for storage or
debugging. The user may also choose the sink port's activity: either it
continuously dump the packets to the file, or stops at certain dumping
This feature shares same CONFIG_RTE_PORT_PCAP compiler option as source
port PCAP file support feature. Users can enable or disable this feature
by setting CONFIG_RTE_PORT_PCAP compiler option "y" or "n".
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Originally, source ports in librte_port is an input port used as packet
generator. Similar to Linux kernel /dev/zero character device, it
generates null packets. This patch adds optional PCAP file support to
source port: instead of sending NULL packets, the source port generates
packets copied from a PCAP file. To increase the performance, the packets
in the file are loaded to memory initially, and copied to mbufs in circular
manner. Users can enable or disable this feature by setting
CONFIG_RTE_PORT_PCAP compiler option "y" or "n".
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
It was requested by Intel, more than one year ago, to replace the name
"Intel DPDK" by "DPDK".
Some references to the old name were still in some docs and code comments,
leading to confusion.
Fixes: ac8ada004c ("doc: remove Intel references from release notes")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fixes the mbuf allocation not initialized problem. This problem will cause
the mbufs not be able to freed back to mempool by rte_pktmbuf_free().
Fixes: ef3403fb6f ("port: source and sink")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Bug fixes for ring ports with IPv4/IPv6 reassembly support.
Previous implementation can't work properly due to incorrect choosing
process function.
Also, assuming that, when processing ip packet, ip header is know we can
set l3_len parameter here.
Fix usage RTE_MBUF_METADATA_* macros due to redefinition the macros.
Fixes: 50f54a84df ("port: add IPv6 reassembly port")
Fixes: ba92d511dd ("port: move metadata offset reference at mbuf head")
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
ring_multi_reader input port (on top of multi consumer rte_ring)
ring_multi_writer output port (on top of multi producer rte_ring)
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch relates to ABI change proposed for librte_port. Macros to
access the packet meta-data stored within the packet buffer has been
adjusted to cover the packet mbuf structure.
The LIBABIVER number is incremented.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Previous implementation won't work on every environment. The order of
allocation of bit-fields within a unit (high-order to low-order or
low-order to high-order) is implementation-defined.
Solution: used bytes instead of bit fields.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Move malloc inside eal and create a new section in MAINTAINERS file for
Memory Allocation in EAL.
Create a dummy malloc library to avoid breaking applications that have
librte_malloc in their DT_NEEDED entries.
This is the first step towards using malloc to allocate memory directly
from memsegs. Thus, memzones would allocate memory through malloc,
allowing to free memzones.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This patch simply applies the transform previously committed in
scripts/cocci/mtod-offset.cocci. No other modifications have been
made here.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Added statistics for ring reader port.
Added statistics for port writer port.
Added statistics for ring writer nodrop port.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
