This new sample app, based on the client/server sample app,
shows the user an scenario using the EFD library.
It consists of:
- A front-end server which has an EFD table that stores the
node id for each flow key, which will distribute the incoming
packets to the different nodes
- A back-end node, which has a hash table where node checks,
after reading packets coming from the server, whether the packet
is meant to be used in such node, in which case it will be TXed,
or not, in which case, packet will be dropped.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Saikrishna Edupuganti <saikrishna.edupuganti@intel.com>
Acked-by: Christian Maciocco <christian.maciocco@intel.com>
This patch enhances the ethtool example to support to show
firmware version, in the same way that the Linux kernel
ethtool does.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Last changes in Niantic and Fortville NIC drivers causes that
vector Rx path is chosen by default in l3fwd-thread application.
This path doesn't support propagation of hw packet type recognition
to the packet_type field in mbuf, and packets cannot be classified
properly.
The approach to solve this problem is similar to the commit:
71a7e2424e ("examples/l3fwd: fix using packet type blindly").
To use sw packet analyzer, new command line option "--parse-ptype" is
introduced.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
This commit add to CLI command check for the following errors
1. SVLAN and CVLAN IDs greater than 12 bits
2. MPLS ID greater than 20 bits
3. max number of supported MPLS labels to avoid array overflow
It prevents running CLI commands with invalid parameters.
Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
A dollar sign is missing and it is not needed because of VPATH.
Reported-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Avoid the use of several strncpy() since getopt is able to
map a long option with an id, which can be matched in the
same switch/case than short options.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Do the same than in l3fwd to avoid strcmp() for long options.
For l2fwd, there is no long option that take advantage of this new
mechanism as --mac-updating and --no-mac-updating are directly setting a
flag without needing an entry in the switch/case.
So this patch just prepares the framework in case a new long option is
added in the future.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
As it gets killed, in SIGINT signal handler, device is not stopped
and closed. In virtio's case, vector assignment in the KVM is not
deassigned.
This patch will invoke dev_stop() and dev_close() in signal handler.
Fixes: d7937e2e3d ("power: initial import")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
To support those devices that do not provide packet type info when
receiving packets, add a new option, --parse-ptype, to analyze
packet type in the Rx callback.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
when "TAILQ_INIT()" was added to the loop of "for (lcore_id = 0; ...)"
statement, the assignment to "lcore_ids" was removed out of the loop.
It changed the original initialization of "lcore_ids".
Fix it by introducing two braces.
Fixes: 45657a5c68 ("examples/vhost: use tailq to link vhost devices")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
When calculating 'nr_mbufs_per_core', 'MAX_PKT_BURST' was mutiplied
twice. Fix it by removing one of them.
Fixes: bdb19b771e ("examples/vhost: fix mbuf allocation failure")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Make all DPDK python application compliant with the PEP8 standard
to allow for consistency checking of patches and to allow further
refactoring.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Function pcmd_drvinfo_callback uses struct info to get
the ethtool information of each port. Struct info will
store the information of previous port until this
information be updated. This patch fixes this issue.
Fixes: bda68ab9d1 ("examples/ethtool: add user-space ethtool sample application")
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Doing a device information query on a non-PCI device such as
vhost was resulting in the dereferencing of a NULL pointer
(the absent PCI data), causing a segmentation fault.
Fixes: bda68ab9d1 ("examples/ethtool: add user-space ethtool sample application")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Today, all logs whose level is lower than INFO are dropped at
compile-time. This prevents from enabling debug logs at runtime using
--log-level=8.
The rationale was to remove debug logs from the data path at
compile-time, avoiding a test at run-time.
This patch changes the behavior of RTE_LOG() to avoid the compile-time
optimization, and introduces the RTE_LOG_DP() macro that has the same
behavior than the previous RTE_LOG(), for the rare cases where debug
logs are in the data path.
So it is now possible to enable debug logs at run-time by just
specifying --log-level=8. Some drivers still have special compile-time
options to enable more debug log. Maintainers may consider to
remove/reduce them.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
vhost-cuse is removed, update corresponding comments that are still
referencing it.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
if machine level CRC extension are available, offload the
hash to machine provide functions e.g. armv8-a CRC extensions
support it
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
For multi-seg mbuf, ip->total_length should be pkt_len subtract
ether len.
Fixes: 4abe471ed6 ("examples/tep_term: implement VXLAN processing")
Signed-off-by: Michael Qiu <qiudayu@chinac.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
l4_len is not fixed, althrough mostly it is a fixed value,
but when guest using iperf to do some tests, the l4_len
will have another 12 bytes optional fields.
Fixes: 2bb43bd435 ("examples/tep_term: add TSO offload configuration")
Signed-off-by: Michael Qiu <qiudayu@chinac.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Add an option, --dequeue-zero-copy, to enable dequeue zero copy.
One thing worth noting while using dequeue zero copy is the nb_tx_desc
has to be small enough so that the eth driver will hit the mbuf free
threshold easily and thus free mbuf more frequently.
The reason behind that is, when dequeue zero copy is enabled, guest Tx
used vring will be updated only when corresponding mbuf is freed. If mbuf
is not freed frequently, the guest Tx vring could be starved.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
When sending packets from virtual machine which in need of TSO
by hardware NIC, the inner L4 checksum is not correct on the
other side of the cable.
It's because get_psd_sum() depends on PKT_TX_TCP_SEG to calculate
pseudo-header checksum, but currently this bit is set after the
function get_psd_sum() is called. The fix is straightforward.
Move the bit setting before get_psd_sum() is called.
Fixes: a50245ede7 ("examples/tep_term: initialize VXLAN sample")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Based on previous fix of offload on VXLAN using i40e, applications
need to set proper tunneling type on ol_flags so that i40e driver
can pass it to NIC.
Fixes: a50245ede7 ("examples/tep_term: initialize VXLAN sample")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
l2fwd could be useful for testing virtual devices without the need
of physical ones.
To achieve this, this patch adds a new option to enable/disable the
MAC addresses updating done at forwarding time: --[no-]mac-updating
It enables the use of l2fwd for basic VM to VM communication.
By default, MAC address updating remains enabled, to keep consistency
with previous usage.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The app_worker_thread() and app_mixed_thread() use rte_ring_sc_dequeue_bulk
to dequeue packets from the ring and this imposes restriction on number of
packets in software ring to be greater than the specified value to start
actual dequeue operation, thus, adds latency to those packets. Therefore,
rte_ring_sc_dequeue_bulk is replaced with rte_ring_sc_dequeue_burst.
Fixes: de3cfa2c98 ("sched: initial import")
Suggested-by: Tao Y Yang <tao.y.yang@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
To illustrate the TAP port usage, the sample configuration file with
passthrough pipeline connected to TAP interface is added.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The TAP port support is added to ip_pipeline app. To parse
configuration file with TAP port entries, parsing function is implemented.
The TAP ports configuration check and initialization routines have been
included in application code.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
There is typo in init.c of ip_pipeline example due to which,
invalid file path is added to -d option of EAL i.e path starting
with =.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The network_layers configuration file (config/network_layers.cfg)
demonstrates the various network layer components such as TCP, UDP,
ICMP etc, which can be easily integrated into ip pipeline
infrastructure.
The loopback function (implemented using passthrough pipeline) is
updated to perform swap operation on the IP source and destination
address, and UDP source and destination ports.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Pass-through pipeline is updated with addition of packet fields swap
action. To enable swap action, new entry i.e 'swap' is required in
the passthrough pipeline section of the configuration file, and this
entry contains the offsets (in bytes) of the packet fields to be
swapped.
Each swap entry specifies the pair of packet fields offsets to be
swapped. Therefore, to perform swap action on more than one pair of
packets fields, separate swap entries, each one responsible for unique
pair of packet fields are needed.
Following illustrates the pass-through pipeline configuration that
swaps the source and destination addresses of the mac and tcp
ports of the received packets.
[EAL]
log_level = 0
[PIPELINE0]
type = MASTER
core = 0
[PIPELINE1]
type = PASS-THROUGH
core = 1
pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
swap = 256 262; MACDST <-> MACSRC
;swap = 282 286; IPSRC <-> IPDST
swap = 290 292; PORTSRC <-> PORTDST
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The default value of ``file_name`` parameter of the source port structure is
changed from ``NULL`` to ``./config/packets.pcap``.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch initializes the salt value used by the following cipher
algorithms:
- CBC: random salt
- GCM/CTR: the key required is 20B, and the last 4B are used as salt.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Introduce a specific cryptodev queue size macro.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Application will segfault if there is IPv4 or IPv6 and no SP/ACL rules
for IPv4 or IPv6 respectively.
Avoid checking the ACL/SP in such cases.
Fixes: 906257e965 ("examples/ipsec-secgw: support IPv6")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
RFC3686: Using AES Counter (CTR) Mode With IPsec ESP.`
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add support for AES-GCM (Galois-Counter Mode).
RFC4106: The Use of Galois-Counter Mode (GCM) in IPSec ESP.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
NIST SP800-38A recommends two methods to generate unpredictable IVs
(Initilisation Vector) for CBC mode:
1) Apply the forward function to a nonce (ie. counter)
2) Use a FIPS-approved random number generator
This patch implements the first recommended method by using the forward
function to generate the IV.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch enables ZUC EEA3 cipher algorithm and
ZUC EIA3 authentication algorithm support to
l2fwd-crypto sample application.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch adds two sample configuration files to ipsec-secgw sample
application. The sample configuration files show how to setup
back-to-back systems that would forward traffic through an IPsec
tunnel.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
