Modied the testpmd softnic forwarding mode as per the
changes in softnic PMD.
To run testpmd application with softnic fwd mode, following
command is used;
$ ./testpmd -c 0xc -n 4 --vdev 'net_softnic0,firmware=script.cli'
-- -i --forward-mode=softnic
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Extend struct rte_bpf_xsym with new fields to provide information about:
- for variables - type and size
- for functions - number of arguments and type/size of each argument
and return value
Such information would allow validate code to perform
more extensive checking on input BPF program and catch
misbehaving BPF code.
That change would cause ABI/API breakage for librte_bpf.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch enables GSO for UDP/IPv4 packets. Oversized UDP/IPv4
packets transmitted over a GSO-enabled port will undergo segmentation.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Tested-by: Yuwei Zhang <yuwei1.zhang@intel.com>
Crypto dev would specify its headroom and tailroom requirement and the
application is expected to honour this while creating buffers.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Currently, the info structure contains the maximum number
of sessions that a device can manage.
This field was useful when the session mempool was created inside
each device, but now it is created at the application level.
Most PMDs do not have a limitation on the sessions managed,
but a few do, therefore this field must remain in the structure.
However, a new value, 0, can be used to indicate that
a device does not have an actual maximum of sessions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of creating a fixed number of sessions,
calculate the necessary number based on number of devices
and queue pairs used.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware
This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.
Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.
Fixes: aa1a6d87f1 ("ethdev: force RSS offload rules again")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Some test applications and examples were not converted
to the new offload API introduced in 17.11.
For reference, see "Hardware Offload" in
doc/guides/prog_guide/poll_mode_drv.rst
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
COUNT action has been modified and has several fields not addressable
though testpmd. In addition, as those fields are not definable testpmd
is providing an empty configuration which is undefined.
Fixes: fb8fd96d42 ("ethdev: add shared counter to flow API")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The vlan tci mask should be set to 0xEFFF, not 0x0,
the wrong mask will cause mask error for register set.
Fixes: d9d5e6f2f0 ("app/testpmd: set default flow director mask")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Below commit checks global device information to determine if a port uses
the softnic driver once initialized. Problem is that this information is
not available at this point when a port is initialized interactively
through a "port attach XXX" command, crashing testpmd.
This patch systematically initializes global device information to address
this issue.
Fixes: 5b590fbe09 ("app/testpmd: add traffic management forwarding mode")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Wrong index used to select descriptor number, causing setting up queue
with wrong number of descriptors.
Fixes: d44f8a485f ("app/testpmd: enable per queue configure")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Application can provide 0 for ring size to use default values. To not
log zero for that case get configured ring size from device.
Call the rte_eth_rxq_info_get() and rte_eth_txq_info_get() functions
to update the number of rx and tx descriptors.
Fixes: d44f8a485f ("app/testpmd: enable per queue configure")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
While previous fix with the same title does address the main issue, root
cause is that proper handling of spec/last/mask was overlooked in the
original patch.
Mask and last fields must be taken into account at all times.
Fixes: d0ad8648b1 ("app/testpmd: fix RSS flow action configuration")
Fixes: 67af7ecc52 ("app/testpmd: fix copy of raw flow item")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
For vdev, just calling rte_eth_dev_close() isn't enough to free all
the resources allocated during device probe, e.g. for virtio-user,
virtio_user_pmd_remove(), i.e. the remove() method of a vdev driver,
needs to be called to unlink the socket file created during device
probe. So this patch calls the rte_eth_dev_detach() for vdev when
quitting testpmd.
vdevs detach on testpmd exit implemented as workaround to fix
a virtio-user issue. The issue was virtio-user cleanup is not
called and existing socket file not cleaned up which will fail
next run.
Added a comment that this workaround should be converted to a proper
cleanup, not something specific to virtio-user, and not something
specific to vdev and testpmd.
Fixes: af75078fec ("first public release")
Fixes: bd8f50a45d ("net/virtio-user: support server mode")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_cryptodev_get_header_session_size() and
rte_cryptodev_get_private_session_size() functions are
targeting symmetric sessions.
With the future addition of asymmetric operations,
these functions need to be renamed from *cryptodev_*_session_*
to *cryptodev_sym_*_session_* to be symmetric specific.
The two original functions are marked as deprecated
and will be removed in 18.08, so applications can still
use the functions in 18.05.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
inlined from ‘cperf_test_vector_get_from_file’ at
app/test-crypto-perf/cperf_test_vector_parsing.c:578:11:
app/test-crypto-perf/cperf_test_vector_parsing.c:510:3: error:
‘strncpy’ output truncated before terminating nul copying as many bytes
from a string as its length [-Werror=stringop-truncation]
strncpy(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
app/test-crypto-perf/cperf_test_vector_parsing.c:528:5: error:
‘strncat’ output truncated before terminating nul copying as many bytes
from a string as its length [-Werror=stringop-truncation]
strncat(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Found this issue with meson build and gcc 8.1.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixing CHECKED_RETURN issue by checking values returned
by rte_bbdev_dec_op_alloc_bulk and rte_bbdev_enc_op_alloc_bulk
functions.
Coverity issue: 279447, 279456
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
When RTE_TEST_PMD_RECORD_BURST_STATS is enabled, testpmd collects
burst statistics and includes them in the port stats report. The
summary should include top 2 most frequent burst sizes, but there is a
bug in finding the top-2. During the scan of burst size counts, the
top-2 can change only if top-1 also changes.
Added logic to update the top-2 if current burst size is larger than
existing top-2, but smaller than existing top-1.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Daniel Shelepov <dashel@microsoft.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
app/test-bbdev/test_bbdev_vector.c:895:3:
error: ‘strncpy’ output truncated before terminating nul copying as
many bytes from a string as its length [-Werror=stringop-truncation]
strncpy(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
app/test-bbdev/test_bbdev_vector.c:917:5:
error: ‘strncat’ output truncated before terminating nul copying as
many bytes from a string as its length [-Werror=stringop-truncation]
strncat(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
app/proc-info/main.c: In function ‘nic_xstats_display’:
app/proc-info/main.c:495:45: error:
‘%s’ directive writing up to 255 bytes into a regioni of size between 165 and 232
[-Werror=format-overflow=]
sprintf(buf, "PUTVAL %s/dpdkstat-port.%u/%s-%s N:%"
^~
PRIu64"\n", host_id, port_id, counter_type,
~~~~~~~~~~~~
app/proc-info/main.c:495:4: note:
‘sprintf’ output between 31 and 435 bytes into a destination of size 256
sprintf(buf, "PUTVAL %s/dpdkstat-port.%u/%s-%s N:%"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PRIu64"\n", host_id, port_id, counter_type,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xstats_names[i].name, values[i]);
Fixes: 2deb6b5246 ("app/procinfo: add collectd format and host id")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Testpmd set CRC_STRIP offload blindly, this is wrong according offload
API definition, and will cause error for the PMDs that doesn't support
CRC_STRIP like virtual PMDs.
Check if underlying device report this capability and don't set it if
not supported.
Fixes: 0074d02fca ("app/testpmd: convert to new Rx offloads API")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add following testpmd run-time commands to support test of
new Rx offload API:
show port <port_id> rx_offload capabilities
show port <port_id> rx_offload configuration
port config <port_id> rx_offload <offload> on|off
port <port_id> rxq <queue_id> rx_offload <offload> on|off
Above last 2 commands should be run when the port is stopped.
And <offload> can be one of "vlan_strip", "ipv4_cksum", ...
Add following testpmd run-time commands to support test of
new Tx offload API:
show port <port_id> tx_offload capabilities
show port <port_id> tx_offload configuration
port config <port_id> tx_offload <offload> on|off
port <port_id> txq <queue_id> tx_offload <offload> on|off
Above last 2 commands should be run when the port is stopped.
And <offload> can be one of "vlan_insert", "udp_cksum", ...
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Setup number of Rx & Tx queues to 0 at rte_eth_dev_configure means
take driver's default queue number, so if during a re-configuration
previous queue number will be overwrite, this is not expected when
we configure dcb. The patch fix it by re-configure device with the
original queue number.
Fixes: 3be82f5cc5 ("ethdev: support PMD-tuned Tx/Rx parameters")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The default RSS hash key automatically provided by testpmd for RSS actions
specified without one is so weak that traffic can't spread properly on L4
with it (as seen with TCPv6).
It is only 30 bytes long, zero-padded to RSS_HASH_KEY_LENGTH (64 bytes),
later truncated to 40 bytes for most PMDs. The presence of padding is
really what kills balancing.
This patch provides a full 64-byte (non-zero-terminated) string to address
this issue.
Fixes: d0ad8648b1 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since the commit referenced below, specifying a RSS action without any
queues (e.g. "actions rss queues end / end") does not override the default
set automatically generated by testpmd.
In short, one cannot instantiate a RSS action with 0 target queues anymore
in order to determine how PMDs react (hint: this is currently undocumented
so they may reject it, however ideally they should interpret it as a
default setting like for other fields where empty values stand for
"defaults".)
Fixes: d0ad8648b1 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Patch adding configurable locking has reshuffled some init stages, but
did not put them back in correct order. Fix order of init by moving
everything that was before arguments parsing into correct places.
Fixes: e505d84c64 ("app/testpmd: make locking memory configurable")
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The second parameter "name" in the function rte_eth_dev_detach
has been already redefined as "char *name __rte_unused",
"port_id" is printed instead of "name" in testpmd.
Fixes: b65ecf1993 ("devargs: rename legacy API")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When a removable device is plugged-out, a RMV interrupt is invoked and
the application can catch the event in order to stop the device
management.
The Testpmd wrong behavior in this case is to detach the removed device
using the EAL detach API.
The EAL API does not invalidate the ethdev port and the port keeps
appearing as valid from the ethdev point of view.
Thus, the next operations for the ethtev port X may trigger an invalid
rte_device access. For example, calling "show port info X" may cause
segfault.
Moreover, the removed port is not removed from the Testpmd data-path
structures. Therefore, the invalid device may still be used by the
Testpmd data-path.
Call the Testpmd detach_port() function which uses the ethdev detach
API, and prepare the Testpmd forward ports database for a new
forwarding session without the detached port.
Fixes: 284c908cc5 ("app/testpmd: request device removal interrupt")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
In the RMV device event callback, there is a call for the removed
device stop operation which triggers a link status operation for the
removed device.
It may casue an error from the removed device PMD.
Skip the link status operation in the above described case.
Fixes: 284c908cc5 ("app/testpmd: request device removal interrupt")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
When the user uses the synchronic hot-plug commands, attach\detach, in
order to insert\remove a port from the system, the forward ports list
update is missed in the current implementation.
Thus, an invalid port may be used for data-path in case of detach
because the detached port was not removed from the forward port list.
In addition, a new port is not used for data-path in case of attach, as the
default behavior of Testpmd, because the attached port was not inserted
to the forward port list.
Update the forward port list in the above cases to allow the correct
port usage for data-path in the next packet forwarding start.
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
A port Rx queue flush is done when the packet forwarding starts in
order to clean the port statistics for a new traffic session.
The flush operation is wrongly called before the update of the new
forward ports, and may fail due to flush operation for an invalid port
configured by the old session.
Move the new forward port setup to be done before the Rx queue flush.
Fixes: 7741e4cf16 ("app/testpmd: VMDq and DCB updates")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
When the forward ports are changed either by new portlist\portmask
configurations or by a port detachment, all the old forward streams
are freed and new streams are allocated to be aligned with the new
forward ports.
If the number of the forward ports drops to 0, there is an attempt
to wrongly allocate 0 memory for the streams.
Skip the streams memory allocation if no forward ports are configured.
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
There are several cases of an invalid port data access that causes the
printing of all the valid ports, for example, when the user asks to
receive a port information of an invalid port.
Wrongly, the port with id 0 is printed in all the above described
cases, regardless of its validity.
Print port 0 only if it is valid as done for the rest of the ports.
Fixes: af75078fec ("first public release")
Fixes: b6ea6408fb ("ethdev: store numa_node per device")
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Testpmd allows to create and control bonding devices by run time
command lines using the bonding PMD API.
Some bonding device slaves operations (close, stop, etc) should not be
used by the application and must be managed by the bonding PMD.
Thus, Testpmd manages slave flags to prevent the special operations
calls and when a slave is added to bonding device by a run time command
line, the flag is set.
There is one more way to define the slaves for a bonding device using
EAL command line and Testpmd doesn't set the slave flag in this case
what causes to the special operations to be called by Testpmd.
Add one more check to detect bonding slave device.
Fixes: 41b05095c4 ("app/testpmd: fix bonding start")
Fixes: 0e545d3047 ("app/testpmd: check stopping port is not in bonding")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
If mlockall() is called while allocated VA space is bigger than
amount of available RAM, FreeBSD kernel will deadlock and need
a hard reboot. We do allocate big amounts of memory because of
how new memory subsystem works, so calling mlockall() will cause
a deadlock. So, disable mlockall() by default on FreeBSD.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add two new command-line parameters for either enabling or
disabling locking all memory at app startup.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Change baseband device name:
- from turbo_sw to baseband_turbo_sw
- from bbdev_null to baseband_null
To keep backwards compatibility the old names are still valid
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Improve readability of test application by replacing
int values with rte_bbdev_event_type enum.
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Creation of new vectors to test and validate BBDevice capabilities
Test app documentation updated accordingly
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Update test vectors directory for Wireless Baseband Device:
- update test vectors names
- python script used for tests execution updated
Update the test app documentation:
- vector test names updated
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Splitting Queue Groups into UL/DL Groups in Turbo Software
Driver. They are independent for Decode/Encode.
Release note updated accordingly.
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
New test created to measure offload cost.
Changes were introduced in API, turbo software driver
and test application
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Support for optional CRC overlap in decode processing implemented
in Turbo Software driver
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Update Turbo Software driver for Wireless Baseband Device:
- function scaling input LLR values to specific range [-16, 16] added
- new test vectors to check device capabilities added
- release note updated accordingly
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
The crypto performance application requires at least
two cores: one master core that launches the other slaves
and one core acting as slave running the crypto device.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
