Remove rte_pause() definition from rte_common.h and
switchover to architecture specific rte_pause.h
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
example app's rxmode, VF driver will report the VF launch failure. So
this patch default to enable HW CRC strip to let VF launch successful.
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Today, all logs whose level is lower than INFO are dropped at
compile-time. This prevents from enabling debug logs at runtime using
--log-level=8.
The rationale was to remove debug logs from the data path at
compile-time, avoiding a test at run-time.
This patch changes the behavior of RTE_LOG() to avoid the compile-time
optimization, and introduces the RTE_LOG_DP() macro that has the same
behavior than the previous RTE_LOG(), for the rare cases where debug
logs are in the data path.
So it is now possible to enable debug logs at run-time by just
specifying --log-level=8. Some drivers still have special compile-time
options to enable more debug log. Maintainers may consider to
remove/reduce them.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
vhost-cuse is removed, update corresponding comments that are still
referencing it.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
rte_thread_setname was a macro defined only for Linux.
The function rte_thread_setname() can now be used on FreeBSD
as well on Linux.
It is required to build librte_pdump.
The macro was 0 for old glibc. The function is now returning -1.
The related logs are decreased from error to debug level because
it is not an important failure, just a debug inconvenience.
Fixes: 278f945402 ("pdump: add new library for packet capture")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The debug logs must be enabled at compile-time and run-time.
There are also some internal flags in some examples to enable the debug
logs of the applications. They are now enabled in debug configs and
can be disabled thanks to the more generic logtype mechanism:
rte_set_log_type(RTE_LOGTYPE_USER1, 0);
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Compilation fails on 32 bits on Vhost_xen sample app, due to wrong casting:
examples/vhost_xen/vhost_monitor.c: In function ‘new_device’:
examples/vhost_xen/vhost_monitor.c:288:62: error: cast from pointer to integer
of different size [-Werror=pointer-to-int-cast]
Fixes: 47bd46112b ("xen: import xenvirt pmd and vhost_xen")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The vhost_net_device_ops indirection is unnecessary because there is only
one implementation of the vhost common code.
Removing it makes the code more readable.
Signed-off-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
examples/vhost_xen/main.c:659:61: error: has no member named data
rte_memcpy((void *)(uintptr_t)buff_addr, (const void*)buff->data, rte_pktmbuf_data_len(buff));
^
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
pthread_setname_np() function added in glibc 2.12, using this function
in older glibc versions cause compile error:
error: implicit declaration of function "pthread_setname_np"
This patch adds "rte_thread_setname" macro and set it according
glibc >= 2.12 check, thread naming disabled for older glibc versions,
glibc versions that support "pthread_setname_np" will keep using this
function.
Fixes: 67b6d3039e ("eal: set name to threads")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for pthread_setname_np on Linux and
pthread_set_name_np on FreeBSD.
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: add name in tep_termination example]
This patch simply applies the transform previously committed in
scripts/cocci/mtod-offset.cocci. No other modifications have been
made here.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Latest mbuf changes (priv_size addition and related fixes)
exposed small problem with testpmd and few other sample apps:
when mbuf size is exaclty 2KB or less, that causes
ixgbe PMD to select scattered RX even for configs with 'normal'
max packet length (max_rx_pkt_len == ETHER_MAX_LEN).
To overcome that problem and unify the code, new macro was created
to represent recommended minimal buffer length for mbuf.
When appropriate, samples are updated to use that macro.
Fixes: dfb03bbe2b ("app/testpmd: use standard functions to initialize
mbufs and mbuf pool")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
rte_free handles getting passed a NULL pointer.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
*alloc() routines return void * and therefore cast is not needed.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
[Thomas: reverse num and size parameters in vhost calloc]
When using test-pmd with flow director in FreeBSD, the application will
segfault/Bus error while parsing the command-line. This is due to how
each commands result structure is represented during parsing, where the offsets
for each tokens value is stored in a character array(char result_buf[BUFSIZ])
in cmdline_parse()(./lib/librte_cmdline/cmdline_parse.c).
The overflow occurs where BUFSIZ is less than the size of a commands result
structure, in this case "struct cmd_pkt_filter_result"
(app/test-pmd/cmdline.c) is 1088 bytes and BUFSIZ on FreeBSD is 1024 bytes as
opposed to 8192 bytes on Linux.
The problem can be reproduced by running test-pmd on FreeBSD:
./testpmd -c 0x3 -n 4 -- -i --portmask=0x3 --pkt-filter-mode=perfect
And adding a filter:
add_perfect_filter 0 udp src 192.168.0.0 1024 dst 192.168.0.0 1024 flexbytes
0x800 vlan 0 queue 0 soft 0x17
This patch removes the OS dependency on BUFSIZ and defines and uses a
library #define CMDLINE_PARSE_RESULT_BUFSIZE 8192
Added boundary checking to ensure this buffer size cannot overflow, with
an error message being produced.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
http://git.droids-corp.org/?p=libcmdline.git;a=commitdiff;h=b1d5b169352e57df3fc14c51ffad4b83f3e5613f
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
CACHE_LINE_SIZE is a macro defined in machine/param.h in FreeBSD and
conflicts with DPDK macro version.
Adding RTE_ prefix to avoid conflicts.
CACHE_LINE_MASK and CACHE_LINE_ROUNDUP are also prefixed.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: updated on HEAD, including PPC]
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
For apps that were using default rte_eth_rxconf and rte_eth_txconf
structures, these have been removed and now they are obtained by
calling rte_eth_dev_info_get, just before setting up RX/TX queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Since commit a155d43011 ("support link bonding device initialization"),
rte_eal_pci_probe() is called in rte_eal_init().
So it doesn't have to be called by application anymore.
It has been fixed for testpmd in commit 2950a76931,
and this patch remove it from other applications.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The mbuf structure already contains a pointer to the beginning of the
buffer (m->buf_addr). It is not needed to use 8 bytes again to store
another pointer to the beginning of the data.
Using a 16 bits unsigned integer is enough as we know that a mbuf is
never longer than 64KB. We gain 6 bytes in the structure thanks to
this modification.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated to apply to latest on mainline.
* Disabled vector PMD in config as it relies heavily on the mbuf layout
This will be re-enabled in a subsequent commit once vPMD has been
reworked to take account of mbuf changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_pktmbuf structure was initially included in the rte_mbuf
structure. This was needed when there was 2 types of mbuf (ctrl and
packet). As the control mbuf has been removed, we can merge the
rte_pktmbuf into the rte_mbuf structure.
Advantages of doing this:
- the access to mbuf fields is easier (ex: m->data instead of m->pkt.data)
- make the structure more consistent: for instance, there was no reason
to have the ol_flags field in rte_mbuf
- it will allow a deeper reorganization of the rte_mbuf structure in the
next commits, allowing to gain several bytes in it
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
[Bruce: updated for latest code and new example apps]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The function rte_snprintf serves no useful purpose. It is the
same as snprintf() for all valid inputs. Deprecate it and
replace all uses in current code.
Leave the tests for the deprecated function in place.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
RTE_LOGTYPE_CONFIG, RTE_LOGTYPE_DATA and RTE_LOGTYPE_PORT are renamed
by adding VHOST prefix.
It prevents from conflict with new RTE_LOGTYPE_PORT of packet framework.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The "default" part in configuration filenames is misleading.
Rename this as "native", as this is the RTE_MACHINE that is set in these files.
This should make it clearer for people who build DPDK on a system then run it on
another one.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Now that we've converted all the pmds in dpdk to use the driver registration
macro, rte_pmd_init_all has become empty. As theres no reason to keep it around
anymore, just remove it and fix up all the eample callers.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This provides a para-virtualization packet switching solution, based on the
Xen hypervisor’s Grant Table, which provides simple and fast packet
switching capability between guest domains and host domain based on
MAC address or VLAN tag.
This solution is comprised of two components; a Poll Mode Driver (PMD)
as the front end in the guest domain and a switching back end in the
host domain. XenStore is used to exchange configure information
between the PMD front end and switching back end,
including grant reference IDs for shared Virtio RX/TX rings, MAC
address, device state, and so on.
The front end PMD can be found in the Intel DPDK directory lib/
librte_pmd_xenvirt and back end example in examples/vhost_xen.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
