New HAL allows driver to read extra ENI stats. Exact meaning of each of
them can be found in base/ena_defs/ena_admin_defs.h file and structure
ena_admin_eni_stats.
The ena_eni_stats structure is exactly the same as ena_admin_eni_stats,
but it was required to be added for compatibility with xstats macros.
Reading ENI stats requires communication with the admin queue.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
There are some cases, where the admin queue commands after the
configuration phase finished - for example, the application could ask
for the driver statistics from multiple cores at once.
As by the design, the admin queue is not multithread safe, the spinlock
was added to protect all usages of the admin queue after the
configuration is done.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The current ena_com version was generated on 26.04.2020.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Checking for the cdesc not being NULL doesn't have any sense if the idx
argument is not 0, so it can be skipped, as the error won't be detected
anyway.
To simplify that, only the 'i' value is being verified and the code is
breaking from the infinite loop in case when all descriptors were copied
into the buffer.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
When filling out meta descriptor, all values should be converted to the
desired type (u32 in case of the meta descriptor) to prevent losing the
data.
For example, io_sq->phase is of type u8. If
ENA_ETH_IO_TX_META_DESC_PHASE_SHIFT would be greater then 8, all data
would be lost.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Static code analysis showed up, that it's possible for meta_desc being
NULL. To avoid dereference of the NULL pointer, extra check was added if
the pointer is in fact valid.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
To minimize chance of integer overflow, the type of admin statistics was
changed from u32 to u64.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
To align the error checking code with other parts of the ena_com,
the conditional check is being tested for the error was wrapped inside
unlikely().
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
* Function argument style improvement (space after *)
* Align indentation of the define
* Typo fix in the documentation
* Remove extra empty line after license (aligned with other files)
* Extra alignment of one line was fixed
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Setting RSS hash function could not be supported by the device. In that
situation there is no need to fill in default hash key or even allocate
hash key.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
It's well defined how the RSS key buffer looks from the device
perspective, so the constant value should be used instead of magic
number. Also it doesn't has to be calculated dynamically.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
There is no need to keep single function for both hash function and
the key. If the caller want's to get only single value, then it had to
pass NULL as one of the values, making the API harder to use.
Except reading functions from the device, one can also use function
ena_com_get_current_hash_function() to get the integer value, which
is representing current hash function stored in the ena_com layer.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The Elastic Netfwork Interface (ENI) stats can be acquired from the HW.
They can provide advanced values which can be further used by the
application for better flow management.
It isn't available to the DPDK application, yet. The PMD must expose
them directly.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The purpose of this change is general code simplification and
type safety improvement for the logical values.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
As there is no replacement for mmiowb() and there is no need to use both
versions in the DPDK, this ifdef was simply removed.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The wait event is being accessed without making sure it the completion
context exists. The check for that is just below, so it could be used
for releasing wait even safely.
Fixes: 3adcba9a8987 ("net/ena: update HAL to the newer version")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Instead of the fixes, 5 ms delay in the polling functions, use
values into given range (by default from 100 us 5000 us) and increase
them exponentially each time, the operation isn't finished.
This change can improve responsiveness of the driver for the fast
operations.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The admin command could return ENA_ADMIN_RESOURCE_BUSY status, which
is meaning that currently the given resource cannot be used.
However, the request can be repeated, so it's being converted to the
ENA_COM_TRY_AGAIN error code.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
ENA_MSLEEP() and ENA_UDELAY() were expecting different behavior - the
first one is expecting driver to sleep, while the other, to busy wait.
For both cases, the rte_delay_(u|m)s() function was used, which could
be either sleep or block, depending on the configuration.
To make the macros valid, the operations should be specified directly.
Because of that, the rte_delay_us_sleep() and rte_delay_us_block() are
now being used.
Fixes: 9ba7981ec992 ("ena: add communication layer for DPDK")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Usage of RTE_MIN(MAX) in ENA_MIN32, ENA_MIN16, ENA_MIN8 (and same for
the MAX), was not enough, as the HAL code is assuming that those macros
will convert both arguments to the specified uintX_t type.
As RTE_MIN(MAX) is using 'typeof' operator, the behavior won't be the
same, especially if arguments has different types (and it could cause
compilation warnings).
To satisfy that, the ENA_MIN_T and ENA_MAX_T macros were added, which
are converting both arguments to the type which is being passed as an
argument.
Fixes: 9ba7981ec992 ("ena: add communication layer for DPDK")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.
For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
This patch adds a missing LLQ-related check in the
ena_com_is_doorbell_needed() routine, which is relevant for the feature
supported by the next generation HW of the ENA.
Fixes: b2b02edeb0d6 ("net/ena/base: upgrade HAL for new HW features")
CC: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Signed-off-by: Artur Rojek <ar@semihalf.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Can be reproduced with "make EXTRA_CFLAGS='-O1'" command using
gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2)
Build error:
.../drivers/net/ena/ena_ethdev.c: In function ‘eth_ena_dev_init’:
.../drivers/net/ena/ena_ethdev.c:1815:20:
error: ‘wd_state’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
1815 | adapter->wd_state = wd_state;
| ~~~~~~~~~~~~~~~~~~^~~~~~~~~~
This looks like false positive, fixing by assigning initial value to
'wd_state' variable.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
The v2.1.0 is refactoring Tx and Rx paths, including few bug fixes and
is also adding a new features which are going to be available with the
newest hardware.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Some ENA devices can pass to the driver descriptor with length 0. To
avoid extra allocation, the descriptor can be reused by simply putting
it back to the device.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
The original Tx function was very long and was containing both cleanup
and the sending sections. Because of that it was having a lot of local
variables, big indentation and was hard to read.
This function was split into 2 sections:
* Sending - which is responsible for preparing the mbuf, mapping it
to the device descriptors and finally, sending packet to the HW
* Cleanup - which is releasing packets sent by the HW. Loop which was
releasing packets was reworked a bit, to make intention more visible
and aligned with other parts of the driver.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
To improve code readability, abstraction was added for operating on IO
rings indexes.
Driver was defining local variable for ring mask in each function that
needed to operate on the ring indexes. Now it is being stored in the
ring as this value won't change unless size of the ring will change and
macros for advancing indexes using the mask has been added.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Divider used for both Tx and Rx cleanup/refill threshold can cause too
big delay in case of the really big rings - for example if the 8k Rx
ring will be used, the refill won't trigger unless 1024 threshold will
be reached. It will also cause driver to try to allocate that much
descriptors.
Limiting it by fixed value - 256 in that case, would limit maximum
time spent in repopulate function.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
ena_com API should be preferred for getting number of used/available
descriptors unless extra calculation needs to be performed.
Some helper variables were added for storing values that are later
reused. Moreover, for limiting the value of sent/received packets to
the number of available descriptors, the RTE_MIN is used instead of
if function, which was doing similar thing but was less descriptive.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
* Split main Rx function into multiple ones - the body of the main
was very big and further there were 2 nested loops, which were
making the code hard to read
* Rework how the Rx mbuf chains are being created - Instead of having
while loop which has conditional check if it's first segment, handle
this segment outside the loop and if more fragments are existing,
process them inside.
* Initialize Rx mbuf using simple function - it's the common thing for
the 1st and next segments.
* Create structure for Rx buffer to align it with Tx path, other ENA
drivers and to make the variable name more descriptive - on DPDK, Rx
buffer must hold only mbuf, so initially array of mbufs was used as
the buffers. However, it was misleading, as it was named
"rx_buffer_info". To make it more clear, the structure holding mbuf
pointer was added and now there is possibility to expand it in the
future without reworking the driver.
* Remove redundant variables and conditional checks.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
In the LLQ (Low-latency queue) mode, the device can indicate that meta
data descriptor caching is disabled. In that case the driver should send
valid meta descriptor on every Tx packet.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
ENA device can report in the AENQ handler amount of Tx packets that were
dropped and not sent.
This statistic is showing global value for the device and because
rte_eth_stats is missing field that could indicate this value (it
isn't the Tx error), it is being presented as a extended statistic.
As the current design of extended statistics prevents tx_drops from
being an atomic variable and both tx_drops and rx_drops are only updated
from the AENQ handler, both were set as non-atomic for the alignment.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
The doorbell code is already issuing the doorbell by using rte_write.
Because of that, there is no need to do that before calling the
function.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Default LLQ (Low-latency queue) maximum header size is 96 bytes and can
be too small for some types of packets - like IPv6 packets with multiple
extension. This can be fixed, by using large LLQ headers.
If the device supports larger LLQ headers, the user can activate them by
using device argument 'large_llq_hdr' with value '1'.
If the device isn't supporting this feature, the default value (96B)
will be used.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Reading values from the device is about the maximum capabilities of the
device. Because of that, the names of the fields storing those values,
functions and temporary variables, should be more descriptive in order
to improve self documentation of the code.
In connection with this, the way of getting maximum queue size could be
simplified - no hardcoded values are needed, as the device is going to
send it's capabilities anyway.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
IO rings were configured with the maximum allowed size for the Tx/Rx
rings. However, the application could decide to create smaller rings.
This patch is using value stored in the ring instead of the value from
the adapter which is indicating the maximum allowed value.
Fixes: df238f84c0a2 ("net/ena: recreate HW IO rings on start and stop")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
The current ena_com version was generated on 25.09.2019.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
As the alignment of the defines wasn't valid, it was removed at all, so
instead of using multiple spaces or tabs, the single space after define
name is being used.
Fixes: 99ecfbf845b3 ("ena: import communication layer")
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Because ena_com is being used by multiple platforms which are using
different C versions, PRIu64 cannot be used directly and must be defined
in the platform file.
Fixes: b2b02edeb0d6 ("net/ena/base: upgrade HAL for new HW features")
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
ENA device is using 48-bit memory for IO. Because of that, the upper
limit had to be updated.
From the driver perspective, it's just a cosmetic change to make
definition of the structure 'ena_common_mem_addr' more descriptive and
the address value was verified anyway for the valid range in the
function 'ena_com_mem_addr_set()'.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
To make the debugging easier, the error logs were added in the Tx path.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
The spaces instead of tabs were used for the indent.
Fixes: 3adcba9a8987 ("net/ena: update HAL to the newer version")
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
The documentation format was aligned and few typos were fixed.
Fixes: 99ecfbf845b3 ("ena: import communication layer")
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
In order to use the accelerated LLQ (Low-lateny queue) mode, the driver
must limit the Tx burst and be aware that the device has the meta
caching disabled. In that situation, the meta descriptor must be valid
on each Tx packet.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
This buffer was never used by the ENA PMD. It could be used for
debugging, but it's presence is redundant now.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
This feature allows for adaptive interrupt moderation. It's not used by
the DPDK PMD, but is a part of the newest HAL version.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
After the indirection table is being saved in the device, there is no
need to convert it back, as it's already saved in host_rss_ind_tbl
array.
As a result, the call to the ena_com_ind_tbl_convert_from_device() is
not needed.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
