If there is no packets to be processed, it does not make sense
to write the same values back to Rx queue structure.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
mbuf raw free adds debug build checks to ensure that mbuf is
really OK to be returned to mempool.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Make sure that number of prepared packets, completed and added
Rx ring pointers are reset to zeros on queue purge at stop.
Fixes: 638bddc99f ("net/sfc: implement EF10 native Rx datapath")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Add support for resetting of driver statistics.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add callback for updating information about link status/info.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Zyta Szpak <zr@semihalf.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add part of PMD for actual reception/transmission.
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Signed-off-by: Dmitri Epshtein <dima@marvell.com>
Signed-off-by: Zyta Szpak <zr@semihalf.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add APIs for dscp priority map configuration. APIs added are
ecore_dcbx_get_dscp_priority(), ecore_dcbx_set_dscp_priority().
These base driver APIs can be used for dscp-map query/config.
Configure the doorbell queue (DORQ) to use vlan-id/priority.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add 'rl_bc_stage_th','rl_timer_stage_th' and 'dcqcn_reset_alpha_on_idle'
to RL update param as well as logs.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Change details:
- Get engine affinity from the management FW and configure accordingly
- Add an LLH filter with the primary MAC address in QPAR/NPAR
- Move some of the LLH APIs around
- Add PPFID APIs
- Update all allocated ppfids with the same value for the
following PORT_PF registers:
NIG_REG_DSCP_TO_TC_MAP_ENABLE
- Add port_id, src_pfid and dst_pfid to DMA engine params
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Request management FW for OEM values, which are negotiated prior to
the driver load by sending the GET_OEM_UPDATES command after both
engines are initialized.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a pretend function for port/PF, pretend to another port and another
function when accessing the ptt window
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Modified queue manager getter APIs to cycle through their range if
index is higher than max. This prevents accessing index out of bounds.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Added ecore_update_eth_rss_ind_table_entry() api to update FW RSS
indirection table entry according to new interface of FW 8.37.x.x.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The driver can notify that there was an MCP reset and read the SHMEM
values before the management FW has completed initializing them.
As a temporary solution, the "sup_msgs" field is used as a SHMEM data
ready indication. This should be replaced with an actual indication
when it is provided by the management FW.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add DPC sync after stopping the physical funciton to allow clean up of
asyncronous events. Post this the driver don't expect the FW to send
async events.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
When the firmware version and the driver HWRM version do not match,
we are logging some messages. These messages unnecessarily clutter
the logs and can add to the noise. We are logging the HWRM version
and the firmware version anyway. The difference in version numbers
can be gleaned from that. Removing the remaining log messages.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Firmware sets pf pair in default VNIC cfg. If the VLAN strip
setting is not available at this time, it will not be
configured correctly in the CFA.
Set the desired VLAN strip mode before default VNIC configuration.
Fixes: 7fe5668d2e ("net/bnxt: support VLAN filter and strip")
Cc: stable@dpdk.org
Signed-off-by: Bei Sun <bei.sun@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If a vnic is configured as default and the setting has not changed,
there is no need to issue this setting again to the FW.
Fixes: db678d5c2b ("net/bnxt: add HWRM VNIC configure")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We need to set HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST bit in
L2_FILTER_ALLOC for filtering non-tunnel packets based on outermost MAC.
Fixes: f92735db1e ("net/bnxt: add L2 filter alloc/init/free")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While registering vf's event completion ring to FW, use the wrong
macro, FW doesn't set up the event completion ring successfully,
VF can't receive any async event.
Fixes: 4535cad395 ("net/bnxt: handle VF/PF initialization appropriately")
Cc: stable@dpdk.org
Signed-off-by: Yongping Zhang <yongping.zhang@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In the current model, VFs are not trusted.
So it is not allowed to send many HWRM commands.
Newer firmware has added support to allow VF to be trusted.
Now the VF queries if it is a trusted entity and based on that
it can send HWRM commands to the firmware.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
For hardware having multiple embedded management processors the firmware
has added support to indicate if the comm channel to the processor has
been enabled. If the channel is enabled, switch the CFA NTUPLE and EM
filtering commands to use the kong channel.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support extended port statistics like COS bytes,
packets, XON -> XOFF and XOFF -> XON transitions in Tx and Rx path.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The HW can support maximum frame length of 9600 bytes.
And we are currently capping the max frame size to 9500 bytes.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
bnxt_start_xmit() was attempting to access an uninitialized ptr - txbd1
which would lead to segmentation fault.
Fix to initialize ptr to NULL and check for the same before access.
Fixes: f10258e39e ("net/bnxt: fix HW Tx checksum offload check")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There was no direct association between the rxq's VNIC and the
vnic_info[].
Explicitly associate the two in bnxt_mq_rx_configure().
Fixes: 0a256e4a54 ("net/bnxt: fix Rx ring count limitation")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Support counter action for 1400 series adapters.
The adapter API for allocating and freeing counters is independent of
the adapter match/action API. If the filter action is requested, a
counter is first allocated and then assigned to the filter, and when
the filter is deleted, the counter must also be deleted.
Counters are DMAd to pre-allocated consistent memory periodically,
controlled by the define VNIC_FLOW_COUNTER_UPDATE_MSECS. The default is
100 milliseconds.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
rte_flow structures were not being freed when destroyed or flushed.
Fixes: 6ced137607 ("net/enic: flow API for NICs with advanced filters enabled")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
This patch adds phy_lock, acquire/release the lock when performing
PHY transactions. Without this fix driver can run into synchronization
issues with management FW when modifying PHY settings.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
If link handling periodic function is allowed to be called in interrupt
context, the periodic function can get called too frequently and exhaust
the retry credits to check link status.
This change makes sure link handling periodic function is not called in
interrupt context.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
