Add support to send PF FLR request to the management firmware to
bringup the device in clean slate. This cleanup is necessary
in some corner cases where the device would be left in a bad
state from its previous operations. The driver will send PF FLR
request before slowpath initialization.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch contains few RSS related changes as follows:
o Fix inadvertent initializing of rss_params outside of the
if block in qed_update_vport() which could cause FW exception.
o Fix disabling of RSS when hash function is 0.
o Rename qede_config_rss() to qede_check_vport_rss_enable()
for better clarity.
o Avoid code duplication using a helper function
qede_init_rss_caps().
Fixes: 4c98f2768e ("net/qede: support RSS hash configuration")
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Previous release of the qede PMD had a limitation that the
driver expects the number of tx and rx queues to be the same.
This patch fixes this issue by making appropriate changes in
control and data path.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
This patch updates the base driver and incorporates necessary changes
required to bring in the new firmware 8.10.9.0.
In addition, it would allow driver to add new functionalities that might
be needed in future.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
In mac-vlan mode, MAC address mask is not supported by HW.
The MAC address mask should not be set in mac-vlan mode.
Remove this parameter from the CLI. Remove MAC address
from mask print too.
Fixes: 53b2bb9b7e ("app/testpmd: new flow director commands")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Use ARM NEON intrinsic to implement i40e vPMD
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Libcrypto documentation was missing the equal signs ("="),
in its title, so it was not present in the documentation
generated.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Libsso KASUMI library has to be built with specific
parameters to make the KASUMI PMD be built as
a shared library, so a note has been added in
its documentation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
ZUC PMD cannot be built as a shared library, due to
the fact that some assembly code in the underlying libsso
library is not relocatable.
This will be fixed in the future, but for the moment,
it is added as a limitationof the PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
All macros related to driver registeration renamed from DRIVER_*
to RTE_PMD_*
This includes:
DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI
DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE
DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV
DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING
DRIVER_EXPORT_* -> RTE_PMD_EXPORT_*
Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
add test for set vf vlan anti spoof
add test for set vf mac anti spoof
add test for set vf vlan stripq
add test for set vf vlan insert
add test for set tx loopback
add test for set all queues drop enable bit
add test for set vf split drop enable bit
add test for set vf mac address
add new APIs to testpmd help command.
add new APIs to the testpmd guide
Modify Makefile, add library rte_pmd_ixgbe to _LDLIBS-y.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch reformats the Broadcom PMD driver documentation.
Also since the PMD now loads on a VF interface, update the
documentation accordingly.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
get the list of all chipsets and NICs supported
by ixgbe driver from
https://downloadcenter.intel.com/download/14687
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
1300 series Cisco adapter firmware version 2.0(13) for UCS
C-series servers and 3.1(2) for blade servers supports more
filtering capabilities. The feature can be enabled via Cisco
CIMC or USCM with the 'advanced filters' radio button. When
enabled, the these additional flow director modes are available:
RTE_ETH_FLOW_NONFRAG_IPV4_OTHER
RTE_ETH_FLOW_NONFRAG_IPV4_SCTP
RTE_ETH_FLOW_NONFRAG_IPV6_UDP
RTE_ETH_FLOW_NONFRAG_IPV6_TCP
RTE_ETH_FLOW_NONFRAG_IPV6_SCTP
RTE_ETH_FLOW_NONFRAG_IPV6_OTHER
Changes:
- Detect and set an 'advanced filters' flag dependent on the adapter
capability.
- Implement RTE_ETH_FILTER_INFO filter op to return the flow types
available dependent on whether advanced filters are enabled.
- Use a function pointer to select how filters are added to the adapter:
copy_fltr_v1() for older firmware/adapters or copy_fltr_v2() for
adapters which support advanced filters.
- Apply fdir global masks to filters when in advanced filter mode.
- Update documentation.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
Update the enic guide to better explain how to setup vNIC parameters
on the Cisco VIC since the introduction of rx scatter, and print an
error message for the case of having 1 RQ configured in the vNIC,
referring to the documentation for more information.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds "Limitations or Known issues" section for
i40e PMD, including two items:
1. MPLS packet classification on X710/XL710
2. 16 Byte Descriptor cannot be used on DPDK VF
3. Link down with i40e kernel driver after DPDK application exist
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Allow binding KNI thread to specific core in single threaded mode
by setting core_id and force_bind config parameters.
Signed-off-by: Vladyslav Buslov <vladyslav.buslov@harmonicinc.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
When receiving coalesced packets in virtio, the original size of the
segments is provided. This is a useful information because it allows to
resegment with the same size.
Add a RX new flag in mbuf, that can be set when packets are coalesced by
a hardware or virtual driver when the m->tso_segsz field is valid and is
set to the segment size of original packets.
This flag is used in next commits in the virtio pmd.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Following discussions in [1] and [2], introduce a new bit to
describe the Rx checksum status in mbuf.
Before this patch, only one flag was available:
PKT_RX_L4_CKSUM_BAD: L4 cksum of RX pkt. is not OK.
And same for L3:
PKT_RX_IP_CKSUM_BAD: IP cksum of RX pkt. is not OK.
This had 2 issues:
- it was not possible to differentiate "checksum good" from
"checksum unknown".
- it was not possible for a virtual driver to say "the checksum
in packet may be wrong, but data integrity is valid".
This patch tries to solve this issue by having 4 states (2 bits)
for the IP and L4 Rx checksums. New values are:
- PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum
-> the application should verify the checksum by sw
- PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong
-> the application can drop the packet without additional check
- PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid
-> the application can accept the packet without verifying the
checksum by sw
- PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet
data, but the integrity of the L4 data is verified.
-> the application can process the packet but must not verify the
checksum by sw. It has to take care to recalculate the cksum
if the packet is transmitted (either by sw or using tx offload)
And same for L3 (replace L4 by IP in description above).
This commit tries to be compatible with existing applications that
only check the existing flag (CKSUM_BAD).
[1] http://dpdk.org/ml/archives/dev/2016-May/039920.html
[2] http://dpdk.org/ml/archives/dev/2016-June/040007.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This function can be used to calculate the checksum of data embedded in
mbuf, that can be composed of several segments.
This function will be used by the virtio pmd in next commits to calculate
the checksum in software in case the protocol is not recognized.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Dequeue zero copy is disabled by default. Here add a new flag
``RTE_VHOST_USER_DEQUEUE_ZERO_COPY`` to explictily enable it.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
- Fix copy/paste error in description of how to capture both rx
& tx traffic in a single pcap file
- Replace duplicate word with what original author presumably
intended, such that description now makes sense
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Explain default testpmd behavior in mac fwd mode to remove
amiguity/confusion regarding user's ability to specify Ethernet
addresses.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Update the testpmd user guide with instructions for retrieving extended
NIC statistics.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Support to configure 25G and 50G speeds is missing from testpmd.
This patch also updates the testpmd user guide accordingly.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
"flowgen" forwarding mode has fixed packet size (300).
Let it re-use --txpkts option for specifying generated packet size.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The vdev eth_bond has been renamed to net_bond.
testpmd is creating a bonding device with the old prefix.
It is changed for consistency.
The script test-null.sh was failing because using the old name
for the null vdev.
Fixes also the bonding and testpmd doc.
Fixes: 2f45703c17 ("drivers: make driver names consistent")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The vdev eth_ring has been renamed to net_ring.
Some unit tests are using the old name and fail.
Fixes also the vdev comments in EAL and ethdev.
Fixes: 2f45703c17 ("drivers: make driver names consistent")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
l2fwd could be useful for testing virtual devices without the need
of physical ones.
To achieve this, this patch adds a new option to enable/disable the
MAC addresses updating done at forwarding time: --[no-]mac-updating
It enables the use of l2fwd for basic VM to VM communication.
By default, MAC address updating remains enabled, to keep consistency
with previous usage.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The ``file_name`` data type of ``struct rte_port_source_params`` and
``struct rte_port_sink_params`` is changed from `char *`` to ``const char *``.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The GCC 4.9 -march option supports the intel code names for processors,
for example -march=silvermont, -march=broadwell.
The RTE_MACHINE config flag can be used to pass code name to
the compiler as -march flag.
Release notes is updated.
Linux and FreeBSD getting started guides are updated with recommended
gcc version as 4.9 and above.
Some of the gmake command examples in sample application guide and driver
guides are updated with gcc version as 4.9.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Introduce a new argument '--enable-lro' to ask testpmd to enable the LRO
feature on enabled ports, like it's done for '--enable-rx-cksum' for
instance.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Dumping the packet type is useful for debug purposes. Instead
of having each application providing its function to do that,
introduce functions to do it.
It factorizes the code and reduces the risk of desynchronization between
the new packet types and the dump function.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Introduce the function rte_net_get_ptype() that parses a mbuf and
returns its packet type. For now, the following packet types are parsed:
L2: Ether
L3: IPv4, IPv6
L4: TCP, UDP, SCTP
The goal here is to provide a reference implementation for packet type
parsing. This function will be used by testpmd in next commits, allowing
to compare its result with the value given by the hardware.
This function will also be useful when implementing Rx offload support
in virtio pmd. Indeed, the virtio protocol gives the csum start and
offset, but it does not give the L4 protocol nor it tells if the
checksum is relevant for inner or outer. This information has to be
known to properly set the ol_flags in mbuf.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Jean Dao <jean.dao@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Introduce a new function to read the packet data from an mbuf chain. It
linearizes the data if required, and also ensures that the mbuf is large
enough.
This function is used in next commits that add a software parser to
retrieve the packet type.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Fixes: 1d0c90e6cf ("doc: update build instructions for libsso_snow3g")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
RFC3686: Using AES Counter (CTR) Mode With IPsec ESP.`
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add support for AES-GCM (Galois-Counter Mode).
RFC4106: The Use of Galois-Counter Mode (GCM) in IPSec ESP.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
NIST SP800-38A recommends two methods to generate unpredictable IVs
(Initilisation Vector) for CBC mode:
1) Apply the forward function to a nonce (ie. counter)
2) Use a FIPS-approved random number generator
This patch implements the first recommended method by using the forward
function to generate the IV.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This code provides the initial implementation of the libcrypto
poll mode driver. All cryptography operations are using Openssl
library crypto API. Each algorithm uses EVP_ interface from
openssl API - which is recommended by Openssl maintainers.
This patch adds libcrypto poll mode driver support to librte_cryptodev
library.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added new SW PMD which makes use of the libsso SW library,
which provides wireless algorithms ZUC EEA3 and EIA3
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_ZUC_EEA3
- RTE_CRYPTO_SYM_AUTH_ZUC_EIA3
The ZUC hash and cipher algorithms, which are enabled
by this crypto PMD are implemented by Intel's libsso software
library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch adds the configuration file support to ipsec_secgw
sample application. Instead of hard-coded rules, the users can
specify their own SP, SA, and routing rules in the configuration
file. A command line option "-f" is added to pass the
configuration file location to the application.
Configuration item formats:
SP rule format:
sp <ip_ver> <dir> esp <action> <priority> <src_ip> <dst_ip> \
<proto> <sport> <dport>
SA rule format:
sa <dir> <spi> <cipher_algo> <cipher_key> <auth_algo> <auth_key> \
<mode> <src_ip> <dst_ip>
Routing rule format:
rt <ip_ver> <src_ip> <dst_ip> <port>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
3DES support added to QuickAssist PMD with CTR and CBC mode.
Both cipher-only and chained with HMAC_SHAx.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Adding the support to bind/unbind crypto devices with
dpdk-devbind.py script, as now it is not restricted
to network devices anymore.
Signed-off-by: Eoin Breen <eoin.breen@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
SNOW 3G algorithm has all uppercase letters in its name
and a space between SNOW and 3G, but some references of it
had some lowercase letters or no space.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Update doc/guides/nics/bnxt.rst to indicate that the bnxt PMD driver
supports Broadcom NetXtreme-C/NetXtreme-E BCM5730X/BCM5740X family of
network controllers and Broadcom StrataGX BCM5871X family of
communications processors.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The ixgbe base driver was updated to version
cid-10g-shared-code.2016.04.12.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
And add read memory barrier to avoid status inconsistency
between two Rx descriptors readings.
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
81xx NIC subsystem differs in new PCI subsystem_device_id and
NICVF_CAP_CQE_RX2 capability.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Packet rejection was routed to a polled queue. This patch route them to a
dummy queue which is not polled.
Fixes: 76f5c99e68 ("mlx5: support flow director")
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This change enables device LRO if requested.
The current implementation of jumbo frame Rx can be used for LRO
directly without changes.
Note that since jumbo frame uses both ring0 and ring1, it cannot
be enabled in UPT (VMDirectPath) mode.
Signed-off-by: Yong Wang <yongwang@vmware.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This feature adds vhost pmd extended statistics from per port perspective
in order to meet the requirements of the applications such as OVS etc.
RX/TX xstats count the bytes without CRC. This is different from physical
NIC stats with CRC.
The statistics counters are based on RFC 2819 and RFC 2863 as follows:
rx/tx_good_packets
rx/tx_total_bytes
rx/tx_missed_pkts
rx/tx_broadcast_packets
rx/tx_multicast_packets
rx/tx_unicast_packets
rx/tx_undersize_errors
rx/tx_size_64_packets
rx/tx_size_65_to_127_packets;
rx/tx_size_128_to_255_packets;
rx/tx_size_256_to_511_packets;
rx/tx_size_512_to_1023_packets;
rx/tx_size_1024_to_1522_packets;
rx/tx_1523_to_max_packets;
rx/tx_errors
rx_fragmented_errors
rx_jabber_errors
rx_unknown_protos_packets;
No API is changed or added.
rte_eth_xstats_get_names() to retrieve what kinds of vhost xstats are
supported,
rte_eth_xstats_get() to retrieve vhost extended statistics,
rte_eth_xstats_reset() to reset vhost extended statistics.
The usage of vhost pmd xstats is the same as virtio pmd xstats.
for example, when test-pmd application is running in interactive mode
vhost pmd xstats will support the two following commands:
show port xstats all | port_id will show vhost xstats
clear port xstats all | port_id will reset vhost xstats
net/virtio pmd xstats(the function virtio_update_packet_stats) is used
as reference when implementing the feature.
Tested-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Added neon based Rx vector implementation.
Selection of the new handler based neon availability at runtime.
Updated the release notes and MAINTAINERS file.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Indirect descriptors are usually supported by virtio-net devices,
allowing to dispatch a larger number of requests.
When the virtio device sends a packet using indirect descriptors,
only one slot is used in the ring, even for large packets.
The main effect is to improve the 0% packet loss benchmark.
A PVP benchmark using Moongen (64 bytes) on the TE, and testpmd
(fwd io for host, macswap for VM) on DUT shows a +50% gain for
zero loss.
On the downside, micro-benchmark using testpmd txonly in VM and
rxonly on host shows a loss between 1 and 4%. But depending on
the needs, feature can be disabled at VM boot time by passing
indirect_desc=off argument to vhost-user device in Qemu.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
remove vhost-cuse code, including the eventfd_link kernel module that
is for vhost-cuse only.
The lib/virt/qemu-wrap.py is also removed, as it's mainly for vhost-cuse
usage.
As we have one vhost implementation now, one vhost config option is
needed only. Thus, CONFIG_RTE_LIBRTE_VHOST_USER is removed.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When VMDQ is enabled, different NICs have different behaviors for
disabling VLAN strip. In detail, i40e only enables/disables it of
PF's main vsi; fm10k cannot disable VLAN strip, etc. We now remove
this option, --vlan-strip, to reduce any confusion. And now, VLAN
strip will be enabled and cannot be disabled.
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Simplify crypto and ethdev pci drivers init by using newly introduced
init macros and helpers.
Those drivers then don't need to register as "rte_driver"s anymore.
Exceptions:
- virtio and mlx* use RTE_INIT directly as they have custom initialization
steps.
- VDEV devices are not modified - they continue to use PMD_REGISTER_DRIVER.
Update documentation for replacing an example referring to
PMD_REGISTER_DRIVER.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
As discussed in the past release, driver names are modified
to be more consistent, and the future driver should follow
this new convention.
Driver names consist of:
"driver category"_"driver folder name"_"optional extra name".
For example:
- Crypto null driver -> "crypto_null"
- Network IXGBE VF driver -> "net_ixgbe_vf"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Lists of DPDK files are hard to maintain up to date and does not bring
much information.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Following discussions on the mailing list [1] and since nobody stood up to
implement the necessary cleanups, here is the ivshmem integration removal.
There is not much to say about this patch, a lot of code is being removed.
The default configuration file for packet_ordering example is replaced with
the "native" x86 file.
The only tricky part is in eal_memory with the memseg index stuff.
More cleanups can be done after this but will come in subsequent patchsets.
[1]: http://dpdk.org/ml/archives/dev/2016-June/040844.html
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
dpdk-nic-bind.py script has been renamed to dpdk-devbind.py,
but some references to the old script have remained.
This commit completes the renaming.
Fixes: a5d7a3f77d ("unify tools naming")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The log history feature was deprecated in 16.07.
The remaining empty functions are removed in 16.11.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
It was planned to remove some mempool functions which are deprecated
since 16.07.
As no other mempool ABI change is planned in 16.11, it is better
to postpone and group every mempool ABI changes in 17.02.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the NIC feature table in the overview doc into a set of ini
files and add functions into the Sphinx conf.py file to auto-generate
them back into an RST table.
The reason for doing this is to make it easier for PMD maintainers to
update the feature matrix that makes up the table and to avoid
frequent and hard to resolve conflicts in doc/guides/nics/overview.rst.
A NIC/PMD feature matrix is now an ini file like the following:
$ head doc/guides/nics/nic_features/i40e.ini
;
; Features of the i40e network driver.
;
[Features]
Link status = Y
Link status event = Y
Rx interrupt = Y
Queue start/stop = Y
...
The output RST table matches the existing table with the column
headers sorted.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add template release notes for DPDK 16.11 with inline
comments and explanations of the various sections.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The API changes are planned for rte_port_source_params and
rte_port_sink_params, which will be supported from release 16.11.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Vhost-cuse was invented before vhost-user exist. The both are actually
doing the same thing: a vhost-net implementation in user space. But they
are not exactly the same thing.
Firstly, vhost-cuse is harder for use; no one seems to care it, either.
Furthermore, since v2.1, a large majority of development effort has gone
to vhost-user. For example, we extended the vhost-user spec to add the
multiple queue support. We also added the vhost-user live migration at
v16.04 and the latest one, vhost-user reconnect that allows vhost app
restart without restarting the guest. Both of them are very important
features for product usage and none of them works for vhost-cuse.
You now see that the difference between vhost-user and vhost-cuse is
big (and will be bigger and bigger as time moves forward), that you
should never use vhost-cuse, that we should drop it completely.
The remove would also result to a much cleaner code base, allowing us
to do all kinds of extending easier.
So here to mark vhost-cuse as deprecated in this release and will be
removed in the next release (v16.11).
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
There was a prior call with an explanation of what needs to be done:
http://dpdk.org/ml/archives/dev/2016-June/040844.html
- Qemu patch upstreamed
- IVSHMEM PCI device managed by a PCI driver
- No DPDK objects (ring/mempool) allocated by EAL
As nobody seems interested, it is time to remove this code which
makes EAL improvements harder.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
For 16.11, the mbuf structure will be modified implying ABI breakage.
Some discussions already took place here:
http://www.dpdk.org/dev/patchwork/patch/12878/
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: John Daley <johndale@cisco.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This is an ABI deprecation notice for DPDK 16.11 in librte_ether about
changes in rte_eth_dev and rte_eth_desc_lim structures.
As discussed in that thread:
http://dpdk.org/ml/archives/dev/2015-September/023603.html
Different NIC models depending on HW offload requested might impose
different requirements on packets to be TX-ed in terms of:
- Max number of fragments per packet allowed
- Max number of fragments per TSO segments
- The way pseudo-header checksum should be pre-calculated
- L3/L4 header fields filling
- etc.
MOTIVATION:
-----------
1) Some work cannot (and didn't should) be done in rte_eth_tx_burst.
However, this work is sometimes required, and now, it's an
application issue.
2) Different hardware may have different requirements for TX offloads,
other subset can be supported and so on.
3) Some parameters (eg. number of segments in ixgbe driver) may hung
device. These parameters may be vary for different devices.
For example i40e HW allows 8 fragments per packet, but that is after
TSO segmentation. While ixgbe has a 38-fragment pre-TSO limit.
4) Fields in packet may require different initialization (like eg. will
require pseudo-header checksum precalculation, sometimes in a
different way depending on packet type, and so on). Now application
needs to care about it.
5) Using additional API (rte_eth_tx_prep) before rte_eth_tx_burst let to
prepare packet burst in acceptable form for specific device.
6) Some additional checks may be done in debug mode keeping tx_burst
implementation clean.
PROPOSAL:
---------
To help user to deal with all these varieties we propose to:
1. Introduce rte_eth_tx_prep() function to do necessary preparations of
packet burst to be safely transmitted on device for desired HW
offloads (set/reset checksum field according to the hardware
requirements) and check HW constraints (number of segments per
packet, etc).
While the limitations and requirements may differ for devices, it
requires to extend rte_eth_dev structure with new function pointer
"tx_pkt_prep" which can be implemented in the driver to prepare and
verify packets, in devices specific way, before burst, what should to
prevent application to send malformed packets.
2. Also new fields will be introduced in rte_eth_desc_lim:
nb_seg_max and nb_mtu_seg_max, providing an information about max
segments in TSO and non-TSO packets acceptable by device.
This information is useful for application to not create/limit
malicious packet.
APPLICATION (CASE OF USE):
--------------------------
1) Application should to initialize burst of packets to send, set
required tx offload flags and required fields, like l2_len, l3_len,
l4_len, and tso_segsz
2) Application passes burst to the rte_eth_tx_prep to check conditions
required to send packets through the NIC.
3) The result of rte_eth_tx_prep can be used to send valid packets
and/or restore invalid if function fails.
eg.
for (i = 0; i < nb_pkts; i++) {
/* initialize or process packet */
bufs[i]->tso_segsz = 800;
bufs[i]->ol_flags = PKT_TX_TCP_SEG | PKT_TX_IPV4
| PKT_TX_IP_CKSUM;
bufs[i]->l2_len = sizeof(struct ether_hdr);
bufs[i]->l3_len = sizeof(struct ipv4_hdr);
bufs[i]->l4_len = sizeof(struct tcp_hdr);
}
/* Prepare burst of TX packets */
nb_prep = rte_eth_tx_prep(port, 0, bufs, nb_pkts);
if (nb_prep < nb_pkts) {
printf("tx_prep failed\n");
/* drop or restore invalid packets */
}
/* Send burst of TX packets */
nb_tx = rte_eth_tx_burst(port, 0, bufs, nb_prep);
/* Free any unsent packets. */
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The right name of ethdev should be dpdk_netdev. However:
1/ We are using rte_ prefix in the code and library names.
2/ The API uses rte_ethdev
That's why 16.11 will just have the rte_ prefix prepended to
the library filename as every other libraries.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Driver names for all the supported devices in DPDK do not have
a naming convention. Some are using a prefix, some are not
and some have long names. Driver names are used when creating
virtual devices, so it is useful to have consistency in the names.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Remove deprecation notice pertaining to introduction of new flow
types in favor of a more generic filtering infrastructure proposal.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Add new section on tested platforms and nics and OSes to the release notes.
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Improve the wording of some text in the "new features" section of
the release notes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
When use i40e linux kernel driver as host driver and DPDK handler the i40e
VF, the promiscuous mode doesn't work in i40e VF. It is not supported by
DPDK i40e VF driver right now.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The following tools may be installed system-wide.
It may be cleaner and more convenient to find them with the same
dpdk- prefix (especially for autocompletion).
Moreover, the script dpdk_nic_bind.py deserves a new name because it is
not restricted to NICs and can be used for e.g. crypto.
These files are renamed:
pmdinfogen -> dpdk-pmdinfogen
pmdinfo.py -> dpdk-pmdinfo.py
dpdk_pdump -> dpdk-pdump
dpdk_proc_info -> dpdk-procinfo
dpdk_nic_bind.py -> dpdk-devbind.py
setup.sh -> dpdk-setup.sh
The tools pmdinfogen, pmdinfo.py and dpdk_pdump are new in 16.07.
The scripts dpdk_nic_bind.py and setup.sh may have been used with
previous releases by end users. That's why a symbolic link still
provide the old name in the installed tools directory.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Update the Sphinx installation instructions in the documentation
contributors guide to reflect the fact that in the 1.4+ versions
of Sphinx the ReadTheDocs theme must also be installed. Previously,
in version 1.3.x, it was installed by default.
Also change 'yum' to 'dnf' for package installations.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Fix warnings raised by Python Sphinx 1.4.5:
guides/sample_app_ug/ip_pipeline.rst:334:
WARNING: Could not lex literal_block as "ini". Highlighting skipped.
guides/sample_app_ug/l2_forward_real_virtual.rst:467:
WARNING: Could not lex literal_block as "c". Highlighting skipped.
guides/sample_app_ug/l3_forward.rst:293:
WARNING: Could not lex literal_block as "c". Highlighting skipped.
guides/sample_app_ug/vm_power_management.rst:162:
WARNING: Could not lex literal_block as "xml". Highlighting skipped.
These warnings arise from invalid syntax in code-block directives.
Fixes: f1e779ec5b ("doc: update ip pipeline app guide")
Fixes: d0dff9ba44 ("doc: sample application user guide")
Fixes: c75f4e6a7a ("doc: add vm power mgmt app")
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Flow Bifurcation is a mechanism which uses features of advanced
Ethernet devices to split traffic between queues. It provides
the capability to let the kernel driver and DPDK driver co-exist
and take advantage of both.
It is achieved by using SR-IOV and the NIC's advanced filtering. This
patch describes Flow Bifurcation and adds the user guide for ixgbe
and i40e NICs.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds an image of the Live Migration of a VM using vhost_user
on the host, test configuration.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch describes the procedure to be be followed to perform
Live Migration of a VM with Virtio PMD running on a host which
is running the vhost_user sample application (vhost-switch).
It includes sample host and VM scripts used in the procedure.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds an image of the Live Migration for
virtio and sriov test configuration.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch describes the procedure to be be followed
to perform Live Migration of a VM with Virtio and VF PMD's
using the bonding PMD.
It includes sample host and VM scripts used in the procedure,
and a sample switch configuration.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
- Fix vhost setup flags
- Add minor edits to improve readability and consistency
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The vhost feature negotiation only happens at virtio reset stage, say
when a virtio-net device is firstly initiated, or when DPDK virtio PMD
initiates. That means, if vhost APP restarts after the negotiation and
reconnects, the feature negotiation process will not be triggered again,
meaning the info is lost. To make reconnect work, QEMU simply saves
the negotiated features before the restart and restores it afterwards.
Therefore, the vhost supported features must be exactly the same before
and after the restart. For example, if TSO is disabled and then enabled,
nothing will work and undefined issues might happen.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The commit cb6696d220 ("drivers: update registration macro usage")
changes the name from virtio-user to virtio_user, because hyphen
cannot be used in a C symbol name. However, this commit does not
update the strings in docs and source code, which could lead to
failure to start this device as per the docs.
This patch updates related strings in the docs and source code.
Fixes: cb6696d220 ("drivers: update registration macro usage")
Reported-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The correct mailing list dev@dpdk.org, not dev@dpkg.org.
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Added a missing note about dependencies on libpcap and
CONFIG_RTE_LIBRTE_PMD_PCAP flag that pdump tool has.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fixed default socket path name "/var/run" to "/var/run/.dpdk" and
"$HOME" to "~/.dpdk".
Fixes: 278f945402 ("pdump: add new library for packet capture")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Since users of the pdump library and tool can chose to have their own
server and client paths, it is must for the pdump tool to use the same
server socket path that was used by primary application while
initializing packet capture framework by rte_pdump_init() or
rte_pdump_set_socket_dir() APIs.
To pass the socket path info to pdump tool a new optional command
line options "server-socket-path" and "client-socket-path" are added.
"client-socket-path" is also added, if the users want to have client
sockets in their own defined paths.
Updated pdump tool guide with the new changes.
Fixes: caa7028276 ("app/pdump: add tool for packet capturing")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Update l3fwd example usage and documentation with missing options.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch explains current virtio PMD Rx/Tx callbacks, to help understand
what's the difference, and how to enable the right ones.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch adds support for extended statistics for BNX2X PMD.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds support for extended statistics for QEDE PMD.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Update the 'High Performance of Small Packets on 40G NIC' section of the
Getting Started Guide (GSG) as the firmware version referenced for a NIC
using the i40e driver was version 4.2.5 which is no longer validated.
Instruct users to consult release notes for current validated firmware
versions.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
mmap the iomem range of the PCI device fails for kernels that
enabled CONFIG_IO_STRICT_DEVMEM option:
EAL: pci_map_resource():
cannot mmap(39, 0x7f1c51800000, 0x100000, 0x0):
Invalid argument (0xffffffffffffffff)
CONFIG_IO_STRICT_DEVMEM is introduced in Linux v4.5 and not enabled
by default:
Linux commit: 90a545e restrict /dev/mem to idle io memory ranges
As a workaround igb_uio can stop reserving PCI memory resources, from
kernel point of view iomem region looks like idle and mmap works
again. This matches uio_pci_generic usage.
With this update device iomem range is not protected against any
other kernel drivers or userspace access. But this shouldn't
be a problem for dpdk usage module since purpose of the igb_uio
module is to provide userspace access.
Fixes: af75078fec ("first public release")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
KASUMI PMD only supports bit-level cipher operations
when destination buffer is different from the source
(out of place operations). This commit adds a check
in the code to prevent the user from trying to perform
in-place bit-level ciphering.
Fixes: 2773c86d06 ("crypto/kasumi: add driver for KASUMI library")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Sphynx reports this error:
doc/guides/prog_guide/dev_kit_build_system.rst:337: WARNING:
Pygments lexer name u'C' is not known
Fixes: 737ddf3fb ("doc: add prog guide section documenting pmdinfo script")
Reported-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The recipe rte.hostapp.mk does not build in hostapp/ anymore.
Fixes: 98b0fdb0ff ("pmdinfogen: add buildtools and pmdinfogen utility")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Information on pmdinfogen may be useful to 3rd party driver developers.
Include documentation on what it does
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Mainly on updating vhost-user part: we now support client mode.
Also refine some words, and add a bit more explanation.
And made an emphatic statement that you are suggested to use vhost-user
instead of vhost-cuse, because we have enhanced vhost-user a lot since
v2.2 (Actually, I doubt there are any people still using vhost-cuse)
[John McNamara: rewords, better formats]
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
For all drivers that currently implement xstats, the id field in the
rte_eth_stats_name structure equals the entry's array index. This
patch eliminates the redundant id field as a direct index lookup is
faster than a search for the matching id field.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
The mempool_count and mempool_free_count behaved contrary to what their
names suggested. The free_count function actually returned the number of
elements that were allocated from the pool, not the number unallocated as
the name implied.
Fix this by introducing two new functions to replace the old ones,
* rte_mempool_avail_count to replace rte_mempool_count
* rte_mempool_in_use_count to replace rte_mempool_free_count
In this patch, the new functions are added, and the old ones are marked
as deprecated. All apps and examples that use the old functions are
updated to use the new functions.
Fixes: af75078fec ("first public release")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The mempool cache is only available to EAL threads as a per-lcore
resource. Change this so that the user can create and provide their own
cache on mempool get and put operations. This works with non-EAL threads
too. This commit introduces the new API calls:
rte_mempool_cache_create(size, socket_id)
rte_mempool_cache_free(cache)
rte_mempool_cache_flush(cache, mp)
rte_mempool_default_cache(mp, lcore_id)
Changes the API calls:
rte_mempool_generic_put(mp, obj_table, n, cache, flags)
rte_mempool_generic_get(mp, obj_table, n, cache, flags)
The cache-oblivious API calls use the per-lcore default local cache.
Signed-off-by: Lazaros Koromilas <l@nofutznetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This commit introduces the API calls:
rte_mempool_generic_put(mp, obj_table, n, is_mp)
rte_mempool_generic_get(mp, obj_table, n, is_mc)
Deprecates the API calls:
rte_mempool_mp_put_bulk(mp, obj_table, n)
rte_mempool_sp_put_bulk(mp, obj_table, n)
rte_mempool_mp_put(mp, obj)
rte_mempool_sp_put(mp, obj)
rte_mempool_mc_get_bulk(mp, obj_table, n)
rte_mempool_sc_get_bulk(mp, obj_table, n)
rte_mempool_mc_get(mp, obj_p)
rte_mempool_sc_get(mp, obj_p)
We also check cookies in one place now.
Signed-off-by: Lazaros Koromilas <l@nofutznetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The standard Virtual Ethernet Bridge(VEB) definition in 1Qbg is a bridge
which has an uplink port to the outside world (maybe another bridge), but
a "floating" VEB is a special VEB without an uplink port to the outside.
Instead, traffic can be sent from one VF to another using the floating
VEB - even when the physical link on the NIC port is down.
This patch adds floating VEB options in the devargs for i40e driver.
Using these parameters, applications can decide whether to use legacy
VEB/VEPA or a floating VEB.
To enable this feature, the user should pass a devargs parameter to the
EAL, for example "-w 84:00.0,enable_floating_veb=1", to control whether
the PMD will to use the floating VEB feature or not.
Once the floating VEB feature is enabled, all the VFs created by
this PF device are connected to the floating VEB.
NOTE: The floating VEB functionality requires a NIC firmware version
of 5.0 or greater.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Provide an update MTU callback. The function returns -ENOTSUP
if Rx scatter is enabled. Updating the MTU to be greater than
the value configured via the Cisco CIMC/UCSM management interface
is allowed provided it is still less than the maximum egress packet
size allowed by the NIC minus the size of the L2 header.
Signed-off-by: John Daley <johndale@cisco.com>
The ixgbe base driver was updated to version
cid-10g-shared-code.2016.04.12
The changes include:
Added sgmii link for X550.
Added mac link setup for X550a SFP and SFP+.
Added KR support for X550em_a.
Added new phy definitions for M88E1500.
Added support for the VLVF to be bypassed when adding/removing
a VFTA entry.
Added X550a flow control auto negotiation support.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This feature enables the TX burst function to emit up to 5 packets using
only two work queue entries (WQEs) on devices that support it. Saves PCI
bandwidth and improves performance.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
Implement send inline feature which copies packet data directly into
work queue entries (WQEs) for improved latency. The maximum packet
size and the minimum number of Tx queues to qualify for inline send
are user-configurable.
This feature is effective when HW causes a performance bottleneck.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Mini (compressed) completion queue entries (CQEs) are returned by the
NIC when PCI back pressure is detected, in which case the first CQE64
contains common packet information followed by a number of CQE8
providing the rest, followed by a matching number of empty CQE64
entries to be used by software for decompression.
Before decompression:
0 1 2 6 7 8
+-------+ +---------+ +-------+ +-------+ +-------+ +-------+
| CQE64 | | CQE64 | | CQE64 | | CQE64 | | CQE64 | | CQE64 |
|-------| |---------| |-------| |-------| |-------| |-------|
| ..... | | cqe8[0] | | | . | | | | | ..... |
| ..... | | cqe8[1] | | | . | | | | | ..... |
| ..... | | ....... | | | . | | | | | ..... |
| ..... | | cqe8[7] | | | | | | | | ..... |
+-------+ +---------+ +-------+ +-------+ +-------+ +-------+
After decompression:
0 1 ... 8
+-------+ +-------+ +-------+
| CQE64 | | CQE64 | | CQE64 |
|-------| |-------| |-------|
| ..... | | ..... | . | ..... |
| ..... | | ..... | . | ..... |
| ..... | | ..... | . | ..... |
| ..... | | ..... | | ..... |
+-------+ +-------+ +-------+
This patch does not perform the entire decompression step as it would be
really expensive, instead the first CQE64 is consumed and an internal
context is maintained to interpret the following CQE8 entries directly.
Intermediate empty CQE64 entries are handed back to HW without further
processing.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
The latest version of Mellanox OFED exposes hardware definitions necessary
to implement data path operation bypassing Verbs. Update the minimum
version requirement to MLNX_OFED >= 3.3 and clean up compatibility checks
for previous releases.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Inline TX will be fully managed by the PMD after Verbs is bypassed in the
data path. Remove the current code until then.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There is no scatter/gather support anymore, CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N
has no purpose and can be removed.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Removing dependency on nfp_uio kernel module. The igb_uio
kernel modules can be used instead.
Fixes: 80bc1752f1 ("nfp: add guide")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
In current i40e codebase, if single VLAN header is added in a packet,
it's treated as inner VLAN. Generally, a single VLAN header is
treated as the outer VLAN header, so update the driver behaviour
appropriately.
Fixes: 19b16e2f64 ("ethdev: add vlan type when setting ether type")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
For performance reasons, this patch uses 2 VIC RQs per RQ presented to
DPDK.
The VIC requires that each descriptor be marked as either a start of
packet (SOP) descriptor or a non-SOP descriptor. A one RQ solution
requires skipping descriptors when receiving small packets and results
in bad performance when receiving many small packets.
The 2 RQ solution makes use of the VIC feature that allows a receive
on primary queue to 'spill over' into another queue if the receive is
too large to fit in the buffer assigned to the descriptor on the
primary queue. This means that there is no skipping of descriptors
when receiving small packets and results in much better performance.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
